[PATCH 01/31] phy: allwinner: phy-sun4i-usb: Convert to platform remove callback returning void

[PATCH 01/31] phy: allwinner: phy-sun4i-usb: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index fbcd7014ab43..6a74e5ce180a 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -698,7 +698,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
 	return data->phys[args->args[0]].phy;
 }
 
-static int sun4i_usb_phy_remove(struct platform_device *pdev)
+static void sun4i_usb_phy_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
@@ -711,8 +711,6 @@ static int sun4i_usb_phy_remove(struct platform_device *pdev)
 		devm_free_irq(dev, data->vbus_det_irq, data);
 
 	cancel_delayed_work_sync(&data->detect);
-
-	return 0;
 }
 
 static const unsigned int sun4i_usb_phy0_cable[] = {
@@ -1054,7 +1052,7 @@ MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
 
 static struct platform_driver sun4i_usb_phy_driver = {
 	.probe	= sun4i_usb_phy_probe,
-	.remove	= sun4i_usb_phy_remove,
+	.remove_new = sun4i_usb_phy_remove,
 	.driver = {
 		.of_match_table	= sun4i_usb_phy_of_match,
 		.name  = "sun4i-usb-phy",
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/31] phy: allwinner: phy-sun4i-usb: Convert to platform remove callback returning void

[Jernej Škrabec]

Dne torek, 07. marec 2023 ob 12:58:30 CET je Uwe Kleine-König napisal(a):
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is (mostly) ignored
> and this typically results in resource leaks. To improve here there is a
> quest to make the remove callback return void. In the first step of this
> quest all drivers are converted to .remove_new() which already returns
> void.
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

>  drivers/phy/allwinner/phy-sun4i-usb.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> b/drivers/phy/allwinner/phy-sun4i-usb.c index fbcd7014ab43..6a74e5ce180a
> 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -698,7 +698,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device
> *dev, return data->phys[args->args[0]].phy;
>  }
> 
> -static int sun4i_usb_phy_remove(struct platform_device *pdev)
> +static void sun4i_usb_phy_remove(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
> @@ -711,8 +711,6 @@ static int sun4i_usb_phy_remove(struct platform_device
> *pdev) devm_free_irq(dev, data->vbus_det_irq, data);
> 
>  	cancel_delayed_work_sync(&data->detect);
> -
> -	return 0;
>  }
> 
>  static const unsigned int sun4i_usb_phy0_cable[] = {
> @@ -1054,7 +1052,7 @@ MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
> 
>  static struct platform_driver sun4i_usb_phy_driver = {
>  	.probe	= sun4i_usb_phy_probe,
> -	.remove	= sun4i_usb_phy_remove,
> +	.remove_new = sun4i_usb_phy_remove,
>  	.driver = {
>  		.of_match_table	= sun4i_usb_phy_of_match,
>  		.name  = "sun4i-usb-phy",





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/31] phy: freescale: phy-fsl-imx8qm-lvds-phy: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
index e514b64bfdab..0ae052df3765 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
@@ -391,11 +391,9 @@ static int mixel_lvds_phy_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int mixel_lvds_phy_remove(struct platform_device *pdev)
+static void mixel_lvds_phy_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
-
-	return 0;
 }
 
 static int __maybe_unused mixel_lvds_phy_runtime_suspend(struct device *dev)
@@ -436,7 +434,7 @@ MODULE_DEVICE_TABLE(of, mixel_lvds_phy_of_match);
 
 static struct platform_driver mixel_lvds_phy_driver = {
 	.probe	= mixel_lvds_phy_probe,
-	.remove	= mixel_lvds_phy_remove,
+	.remove_new = mixel_lvds_phy_remove,
 	.driver = {
 		.pm = &mixel_lvds_phy_pm_ops,
 		.name = "mixel-lvds-phy",
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/31] phy: mediatek: phy-mtk-mipi-dsi: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index cf9c386385bb..526c05a4af5e 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -180,10 +180,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
 				   mipi_tx->pll);
 }
 
-static int mtk_mipi_tx_remove(struct platform_device *pdev)
+static void mtk_mipi_tx_remove(struct platform_device *pdev)
 {
 	of_clk_del_provider(pdev->dev.of_node);
-	return 0;
 }
 
 static const struct of_device_id mtk_mipi_tx_match[] = {
@@ -199,7 +198,7 @@ MODULE_DEVICE_TABLE(of, mtk_mipi_tx_match);
 
 static struct platform_driver mtk_mipi_tx_driver = {
 	.probe = mtk_mipi_tx_probe,
-	.remove = mtk_mipi_tx_remove,
+	.remove_new = mtk_mipi_tx_remove,
 	.driver = {
 		.name = "mediatek-mipi-tx",
 		.of_match_table = mtk_mipi_tx_match,
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 19/31] phy: rockchip: phy-rockchip-inno-csidphy: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/rockchip/phy-rockchip-inno-csidphy.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
index 75f948bdea6a..98c92d6c482f 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -459,13 +459,11 @@ static int rockchip_inno_csidphy_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int rockchip_inno_csidphy_remove(struct platform_device *pdev)
+static void rockchip_inno_csidphy_remove(struct platform_device *pdev)
 {
 	struct rockchip_inno_csidphy *priv = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(priv->dev);
-
-	return 0;
 }
 
 static struct platform_driver rockchip_inno_csidphy_driver = {
@@ -474,7 +472,7 @@ static struct platform_driver rockchip_inno_csidphy_driver = {
 		.of_match_table = rockchip_inno_csidphy_match_id,
 	},
 	.probe = rockchip_inno_csidphy_probe,
-	.remove = rockchip_inno_csidphy_remove,
+	.remove_new = rockchip_inno_csidphy_remove,
 };
 
 module_platform_driver(rockchip_inno_csidphy_driver);
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 19/31] phy: rockchip: phy-rockchip-inno-csidphy: Convert to platform remove callback returning void

[Heiko Stübner]

Am Dienstag, 7. März 2023, 12:58:48 CET schrieb Uwe Kleine-König:
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is (mostly) ignored
> and this typically results in resource leaks. To improve here there is a
> quest to make the remove callback return void. In the first step of this
> quest all drivers are converted to .remove_new() which already returns
> void.
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 20/31] phy: rockchip: phy-rockchip-inno-dsidphy: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
index 2c5847faff63..726928ff1273 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -755,13 +755,11 @@ static int inno_dsidphy_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int inno_dsidphy_remove(struct platform_device *pdev)
+static void inno_dsidphy_remove(struct platform_device *pdev)
 {
 	struct inno_dsidphy *inno = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(inno->dev);
-
-	return 0;
 }
 
 static const struct of_device_id inno_dsidphy_of_match[] = {
@@ -788,7 +786,7 @@ static struct platform_driver inno_dsidphy_driver = {
 		.of_match_table	= of_match_ptr(inno_dsidphy_of_match),
 	},
 	.probe = inno_dsidphy_probe,
-	.remove = inno_dsidphy_remove,
+	.remove_new = inno_dsidphy_remove,
 };
 module_platform_driver(inno_dsidphy_driver);
 
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 20/31] phy: rockchip: phy-rockchip-inno-dsidphy: Convert to platform remove callback returning void

[Heiko Stübner]

Am Dienstag, 7. März 2023, 12:58:49 CET schrieb Uwe Kleine-König:
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is (mostly) ignored
> and this typically results in resource leaks. To improve here there is a
> quest to make the remove callback return void. In the first step of this
> quest all drivers are converted to .remove_new() which already returns
> void.
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 21/31] phy: rockchip: phy-rockchip-inno-hdmi: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 80acca4e9e14..1e1563f5fffc 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -1246,11 +1246,9 @@ static int inno_hdmi_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static int inno_hdmi_phy_remove(struct platform_device *pdev)
+static void inno_hdmi_phy_remove(struct platform_device *pdev)
 {
 	of_clk_del_provider(pdev->dev.of_node);
-
-	return 0;
 }
 
 static const struct of_device_id inno_hdmi_phy_of_match[] = {
@@ -1266,7 +1264,7 @@ MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match);
 
 static struct platform_driver inno_hdmi_phy_driver = {
 	.probe  = inno_hdmi_phy_probe,
-	.remove = inno_hdmi_phy_remove,
+	.remove_new = inno_hdmi_phy_remove,
 	.driver = {
 		.name = "inno-hdmi-phy",
 		.of_match_table = inno_hdmi_phy_of_match,
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 21/31] phy: rockchip: phy-rockchip-inno-hdmi: Convert to platform remove callback returning void

[Heiko Stübner]

Am Dienstag, 7. März 2023, 12:58:50 CET schrieb Uwe Kleine-König:
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is (mostly) ignored
> and this typically results in resource leaks. To improve here there is a
> quest to make the remove callback return void. In the first step of this
> quest all drivers are converted to .remove_new() which already returns
> void.
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 22/31] phy: rockchip: phy-rockchip-typec: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/rockchip/phy-rockchip-typec.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 39db8acde61a..8b1667be4915 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -1194,11 +1194,9 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int rockchip_typec_phy_remove(struct platform_device *pdev)
+static void rockchip_typec_phy_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
-
-	return 0;
 }
 
 static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
@@ -1213,7 +1211,7 @@ MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
 
 static struct platform_driver rockchip_typec_phy_driver = {
 	.probe		= rockchip_typec_phy_probe,
-	.remove		= rockchip_typec_phy_remove,
+	.remove_new	= rockchip_typec_phy_remove,
 	.driver		= {
 		.name	= "rockchip-typec-phy",
 		.of_match_table = rockchip_typec_phy_dt_ids,
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 22/31] phy: rockchip: phy-rockchip-typec: Convert to platform remove callback returning void

[Heiko Stübner]

Am Dienstag, 7. März 2023, 12:58:51 CET schrieb Uwe Kleine-König:
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is (mostly) ignored
> and this typically results in resource leaks. To improve here there is a
> quest to make the remove callback return void. In the first step of this
> quest all drivers are converted to .remove_new() which already returns
> void.
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 23/31] phy: st: phy-stm32-usbphyc: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/st/phy-stm32-usbphyc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 5bb9647b078f..1add3b75f92f 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -766,7 +766,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int stm32_usbphyc_remove(struct platform_device *pdev)
+static void stm32_usbphyc_remove(struct platform_device *pdev)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);
 	int port;
@@ -779,8 +779,6 @@ static int stm32_usbphyc_remove(struct platform_device *pdev)
 	stm32_usbphyc_clk48_unregister(usbphyc);
 
 	clk_disable_unprepare(usbphyc->clk);
-
-	return 0;
 }
 
 static int __maybe_unused stm32_usbphyc_resume(struct device *dev)
@@ -810,7 +808,7 @@ MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match);
 
 static struct platform_driver stm32_usbphyc_driver = {
 	.probe = stm32_usbphyc_probe,
-	.remove = stm32_usbphyc_remove,
+	.remove_new = stm32_usbphyc_remove,
 	.driver = {
 		.of_match_table = stm32_usbphyc_of_match,
 		.name = "stm32-usbphyc",
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel