[PATCH v2 4/4] ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull

[laurent.pinchart@ideasonboard.com (Laurent Pinchart)]

Hi Simon,

On Wednesday 15 May 2013 11:15:01 Laurent Pinchart wrote:
> Hi Simon,
> 
> Thanks for the patch.
> 
> On Wednesday 15 May 2013 11:57:30 Simon Horman wrote:
> > This change makes the DTS consistent with the platform data
> > that exists in board-marzen.c.
> > 
> > Empirically it does not appear to be necessary.
> > 
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

I've noticed that this patch hasn't landed in mainline. Do you still plan to 
upstream it ?

While the board has a pull-up resistor on the IRQ signal and can thus 
accommodate an open-drain configuration, using push-pull mode would lower the 
rise time.

> > ---
> > 
> >  arch/arm/boot/dts/r8a7779-marzen-reference.dts | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
> > b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 10cfc7f..fe32e1a
> > 100644
> > --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
> > +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
> > @@ -40,6 +40,7 @@
> > 
> >  		phy-mode = "mii";
> >  		interrupt-parent = <&irqpin0>;
> >  		interrupts = <1 0x4>;
> > 
> > +		smsc,irq-push-pull;
> > 
> >  		reg-io-width = <4>;
> >  		vddvario-supply = <&fixedregulator3v3>;
> >  		vdd33a-supply = <&fixedregulator3v3>;

-- 
Regards,

Laurent Pinchart