* [PATCH] ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot
@ 2020-02-19 20:42 Joshua Watt
2020-03-13 18:38 ` Joshua Watt
2020-03-17 0:27 ` Heiko Stuebner
0 siblings, 2 replies; 3+ messages in thread
From: Joshua Watt @ 2020-02-19 20:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-rockchip, devicetree, linux-kernel
Cc: Mark Rutland, Rob Herring, Heiko Stuebner, Joshua Watt
IO voltage regulator for the SD card must be kept on all the time,
otherwise when the board reboots the SD card can't be read by the
bootloader.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
---
arch/arm/boot/dts/rk3288-tinker.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 312582c1bd37..acfaa12ec239 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -276,6 +276,7 @@
};
vccio_sd: LDO_REG5 {
+ regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot
2020-02-19 20:42 [PATCH] ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot Joshua Watt
@ 2020-03-13 18:38 ` Joshua Watt
2020-03-17 0:27 ` Heiko Stuebner
1 sibling, 0 replies; 3+ messages in thread
From: Joshua Watt @ 2020-03-13 18:38 UTC (permalink / raw)
To: linux-arm-kernel, linux-rockchip, devicetree, linux-kernel
Cc: Mark Rutland, Rob Herring, Heiko Stuebner
On 2/19/20 2:42 PM, Joshua Watt wrote:
> IO voltage regulator for the SD card must be kept on all the time,
> otherwise when the board reboots the SD card can't be read by the
> bootloader.
Ping?
>
> Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
> ---
> arch/arm/boot/dts/rk3288-tinker.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
> index 312582c1bd37..acfaa12ec239 100644
> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
> @@ -276,6 +276,7 @@
> };
>
> vccio_sd: LDO_REG5 {
> + regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <3300000>;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot
2020-02-19 20:42 [PATCH] ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot Joshua Watt
2020-03-13 18:38 ` Joshua Watt
@ 2020-03-17 0:27 ` Heiko Stuebner
1 sibling, 0 replies; 3+ messages in thread
From: Heiko Stuebner @ 2020-03-17 0:27 UTC (permalink / raw)
To: Joshua Watt
Cc: Mark Rutland, devicetree, linux-kernel, Joshua Watt,
linux-rockchip, Rob Herring, linux-arm-kernel
Am Mittwoch, 19. Februar 2020, 21:42:20 CET schrieb Joshua Watt:
> IO voltage regulator for the SD card must be kept on all the time,
> otherwise when the board reboots the SD card can't be read by the
> bootloader.
>
> Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
applied for 5.7
Thanks
Heiko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-03-17 0:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-02-19 20:42 [PATCH] ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot Joshua Watt
2020-03-13 18:38 ` Joshua Watt
2020-03-17 0:27 ` Heiko Stuebner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).