From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi
Date: Wed, 30 Apr 2014 02:42:20 +0200 [thread overview]
Message-ID: <2171203.7Ft1Jpoq1o@avalon> (raw)
In-Reply-To: <1398757406-30920-2-git-send-email-horms+renesas@verge.net.au>
Hi Simon,
Thank you for the patch.
On Tuesday 29 April 2014 16:43:23 Simon Horman wrote:
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> arch/arm/boot/dts/r8a7779.dtsi | 60 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> index e924f96..3e9cca4 100644
> --- a/arch/arm/boot/dts/r8a7779.dtsi
> +++ b/arch/arm/boot/dts/r8a7779.dtsi
> @@ -203,6 +203,66 @@
> status = "disabled";
> };
>
> + scif0: serial at ffe40000 {
> + compatible = "renesas,scif", "renesas,scif-r8a7779";
The most specific compatible string should come first, so this should read
compatible = "renesas,scif-r8a7779", "renesas,scif";
> + reg = <0xffe40000 265>;
265 ? Don't you mean 256 ? 0x100 might be a better option.
> + interrupt-parent = <&gic>;
> + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> + clock-names = "sci_ick";
Could you try the SCI RFC patch set I've just sent that drop the interface
clock in favour of the functional clock ?
> + status = "disabled";
> + };
> +
> + scif1: serial at ffe41000 {
> + compatible = "renesas,scif", "renesas,scif-r8a7779";
> + reg = <0xffe41000 265>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif2: serial at ffe42000 {
> + compatible = "renesas,scif", "renesas,scif-r8a7779";
> + reg = <0xffe42000 265>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif3: serial at ffe43000 {
> + compatible = "renesas,scif", "renesas,scif-r8a7779";
> + reg = <0xffe43000 265>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif4: serial at ffe44000 {
> + compatible = "renesas,scif", "renesas,scif-r8a7779";
> + reg = <0xffe44000 265>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif5: serial at ffe45000 {
> + compatible = "renesas,scif", "renesas,scif-r8a7779";
> + reg = <0xffe45000 265>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg_clocks R8A7779_CLK_P>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> pfc: pfc at fffc0000 {
> compatible = "renesas,pfc-r8a7779";
> reg = <0xfffc0000 0x23c>;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-04-30 0:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-29 7:43 [PATCH/RFC 0/4] ARM: shmobile: marzen: Initialise SCIF devices using DT Simon Horman
2014-04-29 7:43 ` [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi Simon Horman
2014-04-30 0:42 ` Laurent Pinchart [this message]
2014-04-30 1:51 ` Simon Horman
2014-04-29 7:43 ` [PATCH 2/4] ARM: shmobile: marzen: Remove early_printk from command line Simon Horman
2014-04-30 0:45 ` Laurent Pinchart
2014-04-29 7:43 ` [PATCH 3/4] ARM: shmobile: marzen: Initialise SCIF devices using DT Simon Horman
2014-04-30 0:45 ` Laurent Pinchart
2014-04-29 7:43 ` [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices Simon Horman
2014-04-29 13:40 ` Magnus Damm
2014-04-29 23:51 ` Simon Horman
2014-04-30 0:47 ` Laurent Pinchart
2014-04-30 1:50 ` Simon Horman
2014-04-30 4:49 ` Magnus Damm
2014-04-30 5:31 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2171203.7Ft1Jpoq1o@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox