linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/10] Add basic support for Rockchip RK1108 SOC
@ 2016-11-14 11:55 Andy Yan
  2016-11-14 12:07 ` [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108 Andy Yan
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Andy Yan @ 2016-11-14 11:55 UTC (permalink / raw)
  To: linux-arm-kernel


RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
It is designed for varies application scenario such as car DVR, sports
DV, secure camera and UAV camera.
This patch series add basic support for it, which can boot a board with
initramfs into shell.
More new feathers will come soon.

Changes in v2:
- split dt-binding header from clk driver
- fix some CodingStyle issues
- add dt-binding documentation for pinctrl
- add pull and drive-strength functionality for pinctrl
- fix timer and gic dt description
- ordering devices by register address
- move the board in the rockchip.txt to the block of Rockchip boards

Andy Yan (6):
  dt-bindings: add documentation for rk1108 pinctrl
  pinctrl: rockchip: add support for rk1108
  ARM: add low level debug uart for rk1108
  ARM: dts: add basic support for Rockchip RK1108 SOC
  ARM: rockchip: enable support for RK1108 SoC
  ARM: dts: rockchip: add rockchip RK1108 Evaluation board

Shawn Lin (4):
  dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description
  dt-bindings: add documentation for rk1108 cru
  clk: rockchip: add dt-binding header for rk1108
  clk: rockchip: add clock controller for rk1108

 Documentation/devicetree/bindings/arm/rockchip.txt |   5 +-
 .../bindings/clock/rockchip,rk1108-cru.txt         |  60 +++
 .../devicetree/bindings/mmc/rockchip-dw-mshc.txt   |   1 +
 .../bindings/pinctrl/rockchip,pinctrl.txt          |   9 +-
 arch/arm/Kconfig.debug                             |  30 ++
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/rk1108-evb.dts                   |  69 ++++
 arch/arm/boot/dts/rk1108.dtsi                      | 428 +++++++++++++++++++
 arch/arm/mach-rockchip/rockchip.c                  |   1 +
 drivers/clk/rockchip/Makefile                      |   1 +
 drivers/clk/rockchip/clk-rk1108.c                  | 451 +++++++++++++++++++++
 drivers/clk/rockchip/clk.h                         |  14 +
 drivers/pinctrl/pinctrl-rockchip.c                 |  87 +++-
 include/dt-bindings/clock/rk1108-cru.h             | 270 ++++++++++++
 14 files changed, 1421 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
 create mode 100644 arch/arm/boot/dts/rk1108-evb.dts
 create mode 100644 arch/arm/boot/dts/rk1108.dtsi
 create mode 100644 drivers/clk/rockchip/clk-rk1108.c
 create mode 100644 include/dt-bindings/clock/rk1108-cru.h

-- 
2.7.4

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108
  2016-11-14 11:55 [PATCH v2 00/10] Add basic support for Rockchip RK1108 SOC Andy Yan
@ 2016-11-14 12:07 ` Andy Yan
  2016-11-15 10:32   ` Heiko Stuebner
  2016-11-14 12:12 ` [PATCH v2 07/10] ARM: add low level debug uart " Andy Yan
  2016-11-14 12:17 ` [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board Andy Yan
  2 siblings, 1 reply; 7+ messages in thread
From: Andy Yan @ 2016-11-14 12:07 UTC (permalink / raw)
  To: linux-arm-kernel

From: Shawn Lin <shawn.lin@rock-chips.com>

Add the clock tree definition and driver for rk1108 SoC.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Jacob Chen <jacob2.chen@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

Changes in v2:
- fix some CodingStyle issues

 drivers/clk/rockchip/Makefile     |   1 +
 drivers/clk/rockchip/clk-rk1108.c | 451 ++++++++++++++++++++++++++++++++++++++
 drivers/clk/rockchip/clk.h        |  14 ++
 3 files changed, 466 insertions(+)
 create mode 100644 drivers/clk/rockchip/clk-rk1108.c

diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index b5f2c8e..16e098c 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -11,6 +11,7 @@ obj-y	+= clk-mmc-phase.o
 obj-y	+= clk-ddr.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
+obj-y	+= clk-rk1108.o
 obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3188.o
 obj-y	+= clk-rk3228.o
diff --git a/drivers/clk/rockchip/clk-rk1108.c b/drivers/clk/rockchip/clk-rk1108.c
new file mode 100644
index 0000000..e3a4f74
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk1108.c
@@ -0,0 +1,451 @@
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+ * Author: Shawn Lin <shawn.lin@rock-chips.com>
+ *         Andy Yan <andy.yan@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk1108-cru.h>
+#include "clk.h"
+
+#define RK1108_GRF_SOC_STATUS0	0x480
+
+enum rk1108_plls {
+	apll, dpll, gpll,
+};
+
+static struct rockchip_pll_rate_table rk1108_pll_rates[] = {
+	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
+	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
+	{ /* sentinel */ },
+};
+
+#define RK1108_DIV_CORE_MASK		0xf
+#define RK1108_DIV_CORE_SHIFT		4
+
+#define RK1108_CLKSEL0(_core_peri_div)					\
+	{									\
+		.reg = RK1108_CLKSEL_CON(1),					\
+		.val = HIWORD_UPDATE(_core_peri_div, RK1108_DIV_CORE_MASK,	\
+				RK1108_DIV_CORE_SHIFT)				\
+	}
+
+#define RK1108_CPUCLK_RATE(_prate, _core_peri_div)			\
+	{								\
+		.prate = _prate,					\
+		.divs = {						\
+			RK1108_CLKSEL0(_core_peri_div),		\
+		},							\
+	}
+
+static struct rockchip_cpuclk_rate_table rk1108_cpuclk_rates[] __initdata = {
+	RK1108_CPUCLK_RATE(816000000, 4),
+	RK1108_CPUCLK_RATE(600000000, 4),
+	RK1108_CPUCLK_RATE(312000000, 4),
+};
+
+static const struct rockchip_cpuclk_reg_data rk1108_cpuclk_data = {
+	.core_reg = RK1108_CLKSEL_CON(0),
+	.div_core_shift = 0,
+	.div_core_mask = 0x1f,
+	.mux_core_alt = 1,
+	.mux_core_main = 0,
+	.mux_core_shift = 8,
+	.mux_core_mask = 0x1,
+};
+
+PNAME(mux_pll_p)		= { "xin24m", "xin24m"};
+PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr", "apll_ddr" };
+PNAME(mux_armclk_p)		= { "apll_core", "gpll_core", "dpll_core" };
+PNAME(mux_pmu_1f)		= { "xin24m", "pmu_24m"};
+PNAME(mux_usb480m_phy_p)	= { "usb480m_phy0", "usb480m_phy1" };
+PNAME(mux_usb480m_p)		= { "usb480m_phy", "xin24m" };
+PNAME(mux_hdmiphy_p)		= { "hdmiphy_phy", "pclk_top_pre", "xin24m" };
+PNAME(mux_pll_src_4plls_p)	= { "dpll", "hdmiphy", "gpll", "usb480m" };
+PNAME(mux_pll_src_3plls_p)	= { "apll", "gpll", "dpll" };
+PNAME(mux_pll_src_2plls_p)	= { "dpll", "gpll" };
+PNAME(mux_aclk_peri_src_p)	= { "aclk_peri_src_dpll", "aclk_peri_src_gpll" };
+PNAME(mux_aclk_bus_src_p)	= { "aclk_bus_src_gpll", "aclk_bus_src_apll", "aclk_bus_src_dpll" };
+PNAME(mux_mmc_src_p)		= { "dpll", "gpll", "xin24m", "usb480m" };
+PNAME(mux_pll_src_dpll_gpll_usb480m_p)	= { "dpll", "gpll", "usb480m" };
+PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
+
+static struct rockchip_pll_clock rk1108_pll_clks[] __initdata = {
+	[apll] = PLL(pll_rk3399, RK1108_APLL_ID, "apll", mux_pll_p, 0, RK1108_PLL_CON(0),
+		     RK1108_PLL_CON(3), 8, 31, 0, rk1108_pll_rates),
+	[dpll] = PLL(pll_rk3399, RK1108_DPLL_ID, "dpll", mux_pll_p, 0, RK1108_PLL_CON(8),
+		     RK1108_PLL_CON(11), 8, 31, 0, NULL),
+	[gpll] = PLL(pll_rk3399, RK1108_GPLL_ID, "gpll", mux_pll_p, 0, RK1108_PLL_CON(16),
+		     RK1108_PLL_CON(19), 8, 31, ROCKCHIP_PLL_SYNC_RATE, rk1108_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk1108_uart0_fracmux __initdata =
+	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+			RK1108_CLKSEL_CON(13), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk1108_uart1_fracmux __initdata =
+	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+			RK1108_CLKSEL_CON(14), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk1108_uart2_fracmux __initdata =
+	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+			RK1108_CLKSEL_CON(15), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk1108_clk_branches[] __initdata = {
+	/*
+	 * Clock-Architecture Diagram 2
+	 */
+
+	/* PD_CORE */
+	GATE(0, "dpll_core", "dpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 1, GFLAGS),
+	GATE(0, "apll_core", "apll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 0, GFLAGS),
+	GATE(0, "gpll_core", "gpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 2, GFLAGS),
+	COMPOSITE_NOMUX(0, "pclken_dbg", "armclk", CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(1), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK1108_CLKGATE_CON(0), 5, GFLAGS),
+	COMPOSITE_NOMUX(ACLK_ENMCORE, "aclkenm_core", "armclk", CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK1108_CLKGATE_CON(0), 4, GFLAGS),
+	GATE(ACLK_CORE, "aclk_core", "aclkenm_core", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(11), 0, GFLAGS),
+	GATE(0, "pclk_dbg", "pclken_dbg", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(11), 1, GFLAGS),
+
+	/* PD_RKVENC */
+
+	/* PD_RKVDEC */
+
+	/* PD_PMU_wrapper */
+	COMPOSITE_NOMUX(0, "pmu_24m_ena", "gpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(38), 0, 5, DFLAGS,
+			RK1108_CLKGATE_CON(8), 12, GFLAGS),
+	GATE(0, "pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 0, GFLAGS),
+	GATE(0, "intmem1", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 1, GFLAGS),
+	GATE(0, "gpio0_pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 2, GFLAGS),
+	GATE(0, "pmugrf", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 3, GFLAGS),
+	GATE(0, "pmu_noc", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 4, GFLAGS),
+	GATE(0, "i2c0_pmu_pclk", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 5, GFLAGS),
+	GATE(0, "pwm0_pmu_pclk", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(10), 6, GFLAGS),
+	COMPOSITE(0, "pwm0_pmu_clk", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(12), 7, 1, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(8), 15, GFLAGS),
+	COMPOSITE(0, "i2c0_pmu_clk", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(19), 7, 1, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(8), 14, GFLAGS),
+	GATE(0, "pvtm_pmu", "xin24m", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(8), 13, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 4
+	 */
+	COMPOSITE(0, "aclk_vio0_2wrap_occ", mux_pll_src_4plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 5, DFLAGS,
+			RK1108_CLKGATE_CON(6), 0, GFLAGS),
+	GATE(0, "aclk_vio0_pre", "aclk_vio0_2wrap_occ", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(17), 0, GFLAGS),
+	COMPOSITE_NOMUX(0, "hclk_vio_pre", "aclk_vio0_pre", 0,
+			RK1108_CLKSEL_CON(29), 0, 5, DFLAGS,
+			RK1108_CLKGATE_CON(7), 2, GFLAGS),
+	COMPOSITE_NOMUX(0, "pclk_vio_pre", "aclk_vio0_pre", 0,
+			RK1108_CLKSEL_CON(29), 8, 5, DFLAGS,
+			RK1108_CLKGATE_CON(7), 3, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 5
+	 */
+
+	/* PD_BUS */
+	GATE(0, "aclk_bus_src_gpll", "gpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 0, GFLAGS),
+	GATE(0, "aclk_bus_src_apll", "apll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 1, GFLAGS),
+	GATE(0, "aclk_bus_src_dpll", "dpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 2, GFLAGS),
+	COMPOSITE_NOGATE(ACLK_PRE, "aclk_bus_pre", mux_aclk_bus_src_p, 0,
+			RK1108_CLKSEL_CON(2), 8, 2, MFLAGS, 0, 5, DFLAGS),
+	COMPOSITE_NOMUX(0, "hclk_bus_pre", "aclk_bus_2wrap_occ", 0,
+			RK1108_CLKSEL_CON(3), 0, 5, DFLAGS,
+			RK1108_CLKGATE_CON(1), 4, GFLAGS),
+	COMPOSITE_NOMUX(0, "pclken_bus", "aclk_bus_2wrap_occ", 0,
+			RK1108_CLKSEL_CON(3), 8, 5, DFLAGS,
+			RK1108_CLKGATE_CON(1), 5, GFLAGS),
+	GATE(0, "pclk_bus_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 6, GFLAGS),
+	GATE(0, "pclk_top_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 7, GFLAGS),
+	GATE(0, "pclk_ddr_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 8, GFLAGS),
+	GATE(0, "clk_timer0", "mux_pll_p", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 9, GFLAGS),
+	GATE(0, "clk_timer1", "mux_pll_p", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(1), 10, GFLAGS),
+	GATE(0, "pclk_timer", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 4, GFLAGS),
+
+	COMPOSITE(0, "uart0_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(13), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 1, GFLAGS),
+	COMPOSITE(0, "uart1_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(14), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 3, GFLAGS),
+	COMPOSITE(0, "uart21_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(15), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 5, GFLAGS),
+
+	COMPOSITE_FRACMUX(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+			RK1108_CLKSEL_CON(16), 0,
+			RK1108_CLKGATE_CON(3), 2, GFLAGS,
+			&rk1108_uart0_fracmux),
+	COMPOSITE_FRACMUX(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+			RK1108_CLKSEL_CON(17), 0,
+			RK1108_CLKGATE_CON(3), 4, GFLAGS,
+			&rk1108_uart1_fracmux),
+	COMPOSITE_FRACMUX(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
+			RK1108_CLKSEL_CON(18), 0,
+			RK1108_CLKGATE_CON(3), 6, GFLAGS,
+			&rk1108_uart2_fracmux),
+	GATE(PCLK_UART0, "pclk_uart0", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 10, GFLAGS),
+	GATE(PCLK_UART1, "pclk_uart1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 11, GFLAGS),
+	GATE(PCLK_UART2, "pclk_uart2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 12, GFLAGS),
+
+	COMPOSITE(0, "clk_i2c1", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(19), 15, 2, MFLAGS, 8, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 7, GFLAGS),
+	COMPOSITE(0, "clk_i2c2", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(20), 7, 2, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 8, GFLAGS),
+	COMPOSITE(0, "clk_i2c3", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(20), 15, 2, MFLAGS, 8, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 9, GFLAGS),
+	GATE(0, "pclk_i2c1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 0, GFLAGS),
+	GATE(0, "pclk_i2c2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 1, GFLAGS),
+	GATE(0, "pclk_i2c3", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 2, GFLAGS),
+	COMPOSITE(0, "clk_pwm1", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(12), 15, 2, MFLAGS, 8, 7, DFLAGS,
+			RK1108_CLKGATE_CON(3), 10, GFLAGS),
+	GATE(0, "pclk_pwm1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 6, GFLAGS),
+	GATE(0, "pclk_wdt", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 3, GFLAGS),
+	GATE(0, "pclk_gpio1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 7, GFLAGS),
+	GATE(0, "pclk_gpio2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 8, GFLAGS),
+	GATE(0, "pclk_gpio3", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(13), 9, GFLAGS),
+
+	GATE(0, "pclk_grf", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(14), 0, GFLAGS),
+
+	GATE(ACLK_DMAC, "aclk_dmac", "aclk_bus_pre", 0,
+	     RK1108_CLKGATE_CON(12), 2, GFLAGS),
+	GATE(0, "hclk_rom", "hclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(12), 3, GFLAGS),
+	GATE(0, "aclk_intmem", "aclk_bus_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(12), 1, GFLAGS),
+
+	/* PD_DDR */
+	GATE(0, "apll_ddr", "apll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 8, GFLAGS),
+	GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 9, GFLAGS),
+	GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 10, GFLAGS),
+	COMPOSITE(0, "ddrphy4x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(4), 8, 2, MFLAGS, 0, 3,
+			DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+			RK1108_CLKGATE_CON(10), 9, GFLAGS),
+	GATE(0, "ddrupctl", "ddrphy_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(12), 4, GFLAGS),
+	GATE(0, "ddrc", "ddrphy", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(12), 5, GFLAGS),
+	GATE(0, "ddrmon", "ddrphy_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(12), 6, GFLAGS),
+	GATE(0, "timer_clk", "xin24m", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(0), 11, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 6
+	 */
+
+	/* PD_PERI */
+	COMPOSITE_NOMUX(0, "pclk_periph_pre", "gpll", 0,
+			RK1108_CLKSEL_CON(23), 10, 5, DFLAGS,
+			RK1108_CLKGATE_CON(4), 5, GFLAGS),
+	GATE(0, "pclk_periph", "pclk_periph_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(15), 13, GFLAGS),
+	COMPOSITE_NOMUX(0, "hclk_periph_pre", "gpll", 0,
+			RK1108_CLKSEL_CON(23), 5, 5, DFLAGS,
+			RK1108_CLKGATE_CON(4), 4, GFLAGS),
+	GATE(0, "hclk_periph", "hclk_periph_pre", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(15), 12, GFLAGS),
+
+	GATE(0, "aclk_peri_src_dpll", "dpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(4), 1, GFLAGS),
+	GATE(0, "aclk_peri_src_gpll", "gpll", CLK_IGNORE_UNUSED,
+			RK1108_CLKGATE_CON(4), 2, GFLAGS),
+	COMPOSITE(0, "aclk_periph", mux_aclk_peri_src_p, CLK_IGNORE_UNUSED,
+			RK1108_CLKSEL_CON(23), 15, 2, MFLAGS, 0, 5, DFLAGS,
+			RK1108_CLKGATE_CON(15), 11, GFLAGS),
+
+	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0,
+			RK1108_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 8, DFLAGS,
+			RK1108_CLKGATE_CON(5), 0, GFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+			RK1108_CLKSEL_CON(25), 10, 2, MFLAGS,
+			RK1108_CLKGATE_CON(5), 2, GFLAGS),
+	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
+			RK1108_CLKSEL_CON(26), 0, 8, DFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_emmc_src", mux_mmc_src_p, 0,
+			RK1108_CLKSEL_CON(25), 12, 2, MFLAGS,
+			RK1108_CLKGATE_CON(5), 1, GFLAGS),
+	DIV(SCLK_EMMC, "sclk_emmc", "sclk_emmc_src", 0,
+			RK2928_CLKSEL_CON(26), 8, 8, DFLAGS),
+	GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 0, GFLAGS),
+	GATE(HCLK_SDIO, "hclk_sdio", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 1, GFLAGS),
+	GATE(HCLK_EMMC, "hclk_emmc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 2, GFLAGS),
+
+	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_2plls_p, 0,
+			RK1108_CLKSEL_CON(27), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK1108_CLKGATE_CON(5), 3, GFLAGS),
+	GATE(HCLK_NANDC, "hclk_nandc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 3, GFLAGS),
+
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_2plls_p, 0,
+			RK1108_CLKSEL_CON(27), 7, 2, MFLAGS, 0, 7, DFLAGS,
+			RK1108_CLKGATE_CON(5), 4, GFLAGS),
+	GATE(HCLK_SFC, "hclk_sfc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 10, GFLAGS),
+	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RK1108_SDMMC_CON0, 1),
+	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK1108_SDMMC_CON1, 1),
+
+	MMC(SCLK_SDIO_DRV,     "sdio_drv",     "sclk_sdio",  RK1108_SDIO_CON0,  1),
+	MMC(SCLK_SDIO_SAMPLE,  "sdio_sample",  "sclk_sdio",  RK1108_SDIO_CON1,  1),
+
+	MMC(SCLK_EMMC_DRV,     "emmc_drv",     "sclk_emmc",  RK1108_EMMC_CON0,  1),
+	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK1108_EMMC_CON1,  1),
+};
+
+static const char *const rk1108_critical_clocks[] __initconst = {
+	"aclk_core",
+	"aclk_bus_src_gpll",
+	"aclk_periph",
+	"hclk_periph",
+	"pclk_periph",
+};
+
+static void __init rk1108_clk_init(struct device_node *np)
+{
+	struct rockchip_clk_provider *ctx;
+	void __iomem *reg_base;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: could not map cru region\n", __func__);
+		return;
+	}
+
+	ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (IS_ERR(ctx)) {
+		pr_err("%s: rockchip clk init failed\n", __func__);
+		iounmap(reg_base);
+		return;
+	}
+
+	rockchip_clk_register_plls(ctx, rk1108_pll_clks,
+				   ARRAY_SIZE(rk1108_pll_clks),
+				   RK1108_GRF_SOC_STATUS0);
+	rockchip_clk_register_branches(ctx, rk1108_clk_branches,
+				  ARRAY_SIZE(rk1108_clk_branches));
+	rockchip_clk_protect_critical(rk1108_critical_clocks,
+				      ARRAY_SIZE(rk1108_critical_clocks));
+
+	rockchip_clk_register_armclk(ctx, RK1108_ARMCLK, "armclk",
+			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+			&rk1108_cpuclk_data, rk1108_cpuclk_rates,
+			ARRAY_SIZE(rk1108_cpuclk_rates));
+
+	rockchip_register_softrst(np, 13, reg_base + RK1108_SOFTRST_CON(0),
+				  ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+	rockchip_register_restart_notifier(ctx, RK1108_GLB_SRST_FST, NULL);
+
+	rockchip_clk_of_add_provider(np, ctx);
+}
+CLK_OF_DECLARE(rk1108_cru, "rockchip,rk1108-cru", rk1108_clk_init);
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
index 1653edd..90c580a 100644
--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -34,6 +34,20 @@ struct clk;
 #define HIWORD_UPDATE(val, mask, shift) \
 		((val) << (shift) | (mask) << ((shift) + 16))
 
+/* register positions shared by RK1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+#define RK1108_PLL_CON(x)		((x) * 0x4)
+#define RK1108_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
+#define RK1108_CLKGATE_CON(x)		((x) * 0x4 + 0x120)
+#define RK1108_SOFTRST_CON(x)		((x) * 0x4 + 0x180)
+#define RK1108_GLB_SRST_FST		0x1c0
+#define RK1108_GLB_SRST_SND		0x1c4
+#define RK1108_SDMMC_CON0		0x1d8
+#define RK1108_SDMMC_CON1		0x1dc
+#define RK1108_SDIO_CON0		0x1e0
+#define RK1108_SDIO_CON1		0x1e4
+#define RK1108_EMMC_CON0		0x1e8
+#define RK1108_EMMC_CON1		0x1ec
+
 #define RK2928_PLL_CON(x)		((x) * 0x4)
 #define RK2928_MODE_CON		0x40
 #define RK2928_CLKSEL_CON(x)	((x) * 0x4 + 0x44)
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v2 07/10] ARM: add low level debug uart for rk1108
  2016-11-14 11:55 [PATCH v2 00/10] Add basic support for Rockchip RK1108 SOC Andy Yan
  2016-11-14 12:07 ` [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108 Andy Yan
@ 2016-11-14 12:12 ` Andy Yan
  2016-11-15 11:32   ` Heiko Stuebner
  2016-11-14 12:17 ` [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board Andy Yan
  2 siblings, 1 reply; 7+ messages in thread
From: Andy Yan @ 2016-11-14 12:12 UTC (permalink / raw)
  To: linux-arm-kernel

RK1108 UARTs are Synopsis DesignWare 8250 compatible.
Only with different register addresses.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Jacob Chen <jacob2.chen@rock-chips.com>
---

Changes in v2: None

 arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d83f7c3..408540f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -776,6 +776,30 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
+	config DEBUG_RK1108_UART0
+		bool "Kernel low-level debugging messages via Rockchip RK1108 UART0"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+                  on Rockchip RK1108 based platforms.
+
+	config DEBUG_RK1108_UART1
+		bool "Kernel low-level debugging messages via Rockchip RK1108 UART1"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip RK1108 based platforms.
+
+	config DEBUG_RK1108_UART2
+		bool "Kernel low-level debugging messages via Rockchip RK1108 UART2"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip RK1108 based platforms.
+
 	config DEBUG_RK29_UART0
 		bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
 		depends on ARCH_ROCKCHIP
@@ -1465,6 +1489,9 @@ config DEBUG_UART_PHYS
 	default 0x10126000 if DEBUG_RK3X_UART1
 	default 0x101f1000 if DEBUG_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
+	default 0x10210000 if DEBUG_RK1108_UART2
+	default 0x10220000 if DEBUG_RK1108_UART1
+	default 0x10230000 if DEBUG_RK1108_UART0
 	default 0x11002000 if DEBUG_MT8127_UART0
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
@@ -1563,6 +1590,9 @@ config DEBUG_UART_PHYS
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
+	default 0xc881f000 if DEBUG_RK1108_UART2
+	default 0xc8821000 if DEBUG_RK1108_UART1
+	default 0xc8912000 if DEBUG_RK1108_UART0
 	default 0xe0000a00 if DEBUG_NETX_UART
 	default 0xe0010fe0 if ARCH_RPC
 	default 0xf0000be0 if ARCH_EBSA110
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board
  2016-11-14 11:55 [PATCH v2 00/10] Add basic support for Rockchip RK1108 SOC Andy Yan
  2016-11-14 12:07 ` [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108 Andy Yan
  2016-11-14 12:12 ` [PATCH v2 07/10] ARM: add low level debug uart " Andy Yan
@ 2016-11-14 12:17 ` Andy Yan
  2016-11-16 11:59   ` Heiko Stuebner
  2 siblings, 1 reply; 7+ messages in thread
From: Andy Yan @ 2016-11-14 12:17 UTC (permalink / raw)
  To: linux-arm-kernel

RK1108 EVB is designed by Rockchip for CVR field.
This patch add basic support for it, which can boot with
initramfs into shell.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>

---

Changes in v2:
- move the board in the rockchip.txt to the block of Rockchip boards

 Documentation/devicetree/bindings/arm/rockchip.txt |  5 +-
 arch/arm/boot/dts/Makefile                         |  1 +
 arch/arm/boot/dts/rk1108-evb.dts                   | 69 ++++++++++++++++++++++
 3 files changed, 74 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rk1108-evb.dts

diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 10b92b5..e658b62 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,6 +1,5 @@
 Rockchip platforms device tree bindings
 ---------------------------------------
-
 - Kylin RK3036 board:
     Required root node properties:
       - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
@@ -111,6 +110,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
 
+- Rockchip RK1108 Evaluation board
+    Required root node properties:
+      - compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+
 - Rockchip RK3368 evb:
     Required root node properties:
       - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e49476a..249dca9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -635,6 +635,7 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pba8.dtb \
 	arm-realview-pbx-a9.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk1108-evb.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts
new file mode 100644
index 0000000..3956cff
--- /dev/null
+++ b/arch/arm/boot/dts/rk1108-evb.dts
@@ -0,0 +1,69 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk1108.dtsi"
+
+/ {
+	model = "Rockchip RK1108 Evaluation board";
+	compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+
+	memory at 60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108
  2016-11-14 12:07 ` [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108 Andy Yan
@ 2016-11-15 10:32   ` Heiko Stuebner
  0 siblings, 0 replies; 7+ messages in thread
From: Heiko Stuebner @ 2016-11-15 10:32 UTC (permalink / raw)
  To: linux-arm-kernel

Am Montag, 14. November 2016, 20:07:42 CET schrieb Andy Yan:
> From: Shawn Lin <shawn.lin@rock-chips.com>
> 
> Add the clock tree definition and driver for rk1108 SoC.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
> Changes in v2:
> - fix some CodingStyle issues
> 
>  drivers/clk/rockchip/Makefile     |   1 +
>  drivers/clk/rockchip/clk-rk1108.c | 451
> ++++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h        | 
> 14 ++
>  3 files changed, 466 insertions(+)
>  create mode 100644 drivers/clk/rockchip/clk-rk1108.c
> 
> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
> index b5f2c8e..16e098c 100644
> --- a/drivers/clk/rockchip/Makefile
> +++ b/drivers/clk/rockchip/Makefile
> @@ -11,6 +11,7 @@ obj-y	+= clk-mmc-phase.o
>  obj-y	+= clk-ddr.o
>  obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
> 
> +obj-y	+= clk-rk1108.o
>  obj-y	+= clk-rk3036.o
>  obj-y	+= clk-rk3188.o
>  obj-y	+= clk-rk3228.o
> diff --git a/drivers/clk/rockchip/clk-rk1108.c
> b/drivers/clk/rockchip/clk-rk1108.c new file mode 100644
> index 0000000..e3a4f74
> --- /dev/null
> +++ b/drivers/clk/rockchip/clk-rk1108.c
> @@ -0,0 +1,451 @@
> +/*
> + * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
> + * Author: Shawn Lin <shawn.lin@rock-chips.com>
> + *         Andy Yan <andy.yan@rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/syscore_ops.h>
> +#include <dt-bindings/clock/rk1108-cru.h>
> +#include "clk.h"
> +
> +#define RK1108_GRF_SOC_STATUS0	0x480
> +
> +enum rk1108_plls {
> +	apll, dpll, gpll,
> +};
> +
> +static struct rockchip_pll_rate_table rk1108_pll_rates[] = {
> +	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
> +	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
> +	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
> +	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
> +	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
> +	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
> +	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
> +	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
> +	{ /* sentinel */ },
> +};
> +
> +#define RK1108_DIV_CORE_MASK		0xf
> +#define RK1108_DIV_CORE_SHIFT		4
> +
> +#define RK1108_CLKSEL0(_core_peri_div)					\
> +	{									\
> +		.reg = RK1108_CLKSEL_CON(1),					\
> +		.val = HIWORD_UPDATE(_core_peri_div, RK1108_DIV_CORE_MASK,	\
> +				RK1108_DIV_CORE_SHIFT)				\
> +	}
> +
> +#define RK1108_CPUCLK_RATE(_prate, _core_peri_div)			\
> +	{								\
> +		.prate = _prate,					\
> +		.divs = {						\
> +			RK1108_CLKSEL0(_core_peri_div),		\
> +		},							\
> +	}
> +
> +static struct rockchip_cpuclk_rate_table rk1108_cpuclk_rates[] __initdata =
> { +	RK1108_CPUCLK_RATE(816000000, 4),
> +	RK1108_CPUCLK_RATE(600000000, 4),
> +	RK1108_CPUCLK_RATE(312000000, 4),
> +};
> +
> +static const struct rockchip_cpuclk_reg_data rk1108_cpuclk_data = {
> +	.core_reg = RK1108_CLKSEL_CON(0),
> +	.div_core_shift = 0,
> +	.div_core_mask = 0x1f,
> +	.mux_core_alt = 1,
> +	.mux_core_main = 0,
> +	.mux_core_shift = 8,
> +	.mux_core_mask = 0x1,
> +};
> +
> +PNAME(mux_pll_p)		= { "xin24m", "xin24m"};
> +PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr", "apll_ddr" };
> +PNAME(mux_armclk_p)		= { "apll_core", "gpll_core", "dpll_core" };
> +PNAME(mux_pmu_1f)		= { "xin24m", "pmu_24m"};
> +PNAME(mux_usb480m_phy_p)	= { "usb480m_phy0", "usb480m_phy1" };
> +PNAME(mux_usb480m_p)		= { "usb480m_phy", "xin24m" };
> +PNAME(mux_hdmiphy_p)		= { "hdmiphy_phy", "pclk_top_pre", "xin24m" };

pmu_1f, usbphy and hdmiphy do not seem to be used in this driver, while they 
are specified in the clock documentation.

Also there is a discrepancy between your pmu_24m and pmu_24m_ena below I 
think.


The rest looks sane but I didn't check every register offset :-) .


Heiko

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 07/10] ARM: add low level debug uart for rk1108
  2016-11-14 12:12 ` [PATCH v2 07/10] ARM: add low level debug uart " Andy Yan
@ 2016-11-15 11:32   ` Heiko Stuebner
  0 siblings, 0 replies; 7+ messages in thread
From: Heiko Stuebner @ 2016-11-15 11:32 UTC (permalink / raw)
  To: linux-arm-kernel

Am Montag, 14. November 2016, 20:12:35 CET schrieb Andy Yan:
> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
> Only with different register addresses.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com>

applied to my soc branch


Thanks
Heiko

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board
  2016-11-14 12:17 ` [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board Andy Yan
@ 2016-11-16 11:59   ` Heiko Stuebner
  0 siblings, 0 replies; 7+ messages in thread
From: Heiko Stuebner @ 2016-11-16 11:59 UTC (permalink / raw)
  To: linux-arm-kernel

Am Montag, 14. November 2016, 20:17:43 CET schrieb Andy Yan:
> RK1108 EVB is designed by Rockchip for CVR field.
> This patch add basic support for it, which can boot with
> initramfs into shell.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> Acked-by: Rob Herring <robh@kernel.org>
> 
> ---
> 
> Changes in v2:
> - move the board in the rockchip.txt to the block of Rockchip boards
> 
>  Documentation/devicetree/bindings/arm/rockchip.txt |  5 +-
>  arch/arm/boot/dts/Makefile                         |  1 +
>  arch/arm/boot/dts/rk1108-evb.dts                   | 69
> ++++++++++++++++++++++ 3 files changed, 74 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/rk1108-evb.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> b/Documentation/devicetree/bindings/arm/rockchip.txt index 10b92b5..e658b62
> 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -1,6 +1,5 @@
>  Rockchip platforms device tree bindings
>  ---------------------------------------
> -
>  - Kylin RK3036 board:
>      Required root node properties:
>        - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";

dropped this unrelated change

> @@ -111,6 +110,10 @@ Rockchip platforms device tree bindings
>      Required root node properties:
>        - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> 
> +- Rockchip RK1108 Evaluation board
> +    Required root node properties:
> +      - compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
> +
>  - Rockchip RK3368 evb:
>      Required root node properties:
>        - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";

binding moved to a separate patch and applied to my dts64 to prevent conflicts 
with px5 addition.

And the actual board dts of course applied to my dts32 branch.


Thanks
Heiko

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2016-11-16 11:59 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-14 11:55 [PATCH v2 00/10] Add basic support for Rockchip RK1108 SOC Andy Yan
2016-11-14 12:07 ` [PATCH v2 04/10] clk: rockchip: add clock controller for rk1108 Andy Yan
2016-11-15 10:32   ` Heiko Stuebner
2016-11-14 12:12 ` [PATCH v2 07/10] ARM: add low level debug uart " Andy Yan
2016-11-15 11:32   ` Heiko Stuebner
2016-11-14 12:17 ` [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board Andy Yan
2016-11-16 11:59   ` Heiko Stuebner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).