From mboxrd@z Thu Jan  1 00:00:00 1970
From: jernej.skrabec@siol.net (Jernej =?utf-8?B?xaBrcmFiZWM=?=)
Date: Wed, 28 Feb 2018 22:23:35 +0100
Subject: [PATCH v2 00/16] Implement H3/H5 HDMI driver
In-Reply-To: <20180227222701.9716-1-jernej.skrabec@siol.net>
References: <20180227222701.9716-1-jernej.skrabec@siol.net>
Message-ID: <2235934.0TF68fluGz@jernej-laptop>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Maxime,

Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> works well. Bug, which prevented correct operation for some resolutions,
> is also fixed.
> 
> Code is based on linux-next, next-20180226 tag.

Today I tried on this series on  next-20180228, but resolution switching 
doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
I investigated a bit and it seems that clocks stays at first set even if tcon 
(the owner of exclusive lock) request the new one. Example:

[   69.325732] TCON clk wanted: 148500000
[   69.325740] TCON real clk: 69272728
[   69.325770] HDMI clk wanted: 148500000
[   69.325773] HDMI real clk: 138545455
[   69.325815] HDMI PHY clk wanted: 148500000
[   69.325819] HDMI PHY real clk: 138545454

Is there anything I can do to help debug this?

Best regards,
Jernej