* [PATCH] ARM: dts: exynos4210: Work around lack of cpufreq regulator lookup
@ 2013-08-20 17:35 Tomasz Figa
2013-08-26 17:13 ` Tomasz Figa
0 siblings, 1 reply; 3+ messages in thread
From: Tomasz Figa @ 2013-08-20 17:35 UTC (permalink / raw)
To: linux-arm-kernel
Exynos cpufreq drivers does not support device tree based regulator
lookup, so it can get the VDD ARM regulator only by its name. To get
cpufreq working for now, this patch works this around by renaming the
regulator in board dts files to vdd_arm, which is the name expected by
the driver.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 7 ++++++-
arch/arm/boot/dts/exynos4210-trats.dts | 7 ++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 382d8c7..46378fe 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -192,7 +192,12 @@
};
buck1_reg: BUCK1 {
- regulator-name = "VDD_ARM_1.2V";
+ /*
+ * HACK: The real name is VDD_ARM_1.2V,
+ * but exynos-cpufreq does not support
+ * DT-based regulator lookup yet.
+ */
+ regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 1c164f2..63cc571 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -290,7 +290,12 @@
};
varm_breg: BUCK1 {
- regulator-name = "VARM_1.2V_C210";
+ /*
+ * HACK: The real name is VARM_1.2V_C210,
+ * but exynos-cpufreq does not support
+ * DT-based regulator lookup yet.
+ */
+ regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH] ARM: dts: exynos4210: Work around lack of cpufreq regulator lookup
2013-08-20 17:35 [PATCH] ARM: dts: exynos4210: Work around lack of cpufreq regulator lookup Tomasz Figa
@ 2013-08-26 17:13 ` Tomasz Figa
2013-09-25 14:10 ` [PATCH RESEND REGRESSION] " Tomasz Figa
0 siblings, 1 reply; 3+ messages in thread
From: Tomasz Figa @ 2013-08-26 17:13 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 20 of August 2013 19:35:36 Tomasz Figa wrote:
> Exynos cpufreq drivers does not support device tree based regulator
> lookup, so it can get the VDD ARM regulator only by its name. To get
> cpufreq working for now, this patch works this around by renaming the
> regulator in board dts files to vdd_arm, which is the name expected by
> the driver.
>
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/boot/dts/exynos4210-origen.dts | 7 ++++++-
> arch/arm/boot/dts/exynos4210-trats.dts | 7 ++++++-
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
> b/arch/arm/boot/dts/exynos4210-origen.dts index 382d8c7..46378fe 100644
> --- a/arch/arm/boot/dts/exynos4210-origen.dts
> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
> @@ -192,7 +192,12 @@
> };
>
> buck1_reg: BUCK1 {
> - regulator-name = "VDD_ARM_1.2V";
> + /*
> + * HACK: The real name is VDD_ARM_1.2V,
> + * but exynos-cpufreq does not support
> + * DT-based regulator lookup yet.
> + */
> + regulator-name = "vdd_arm";
> regulator-min-microvolt = <950000>;
> regulator-max-microvolt = <1350000>;
> regulator-always-on;
> diff --git a/arch/arm/boot/dts/exynos4210-trats.dts
> b/arch/arm/boot/dts/exynos4210-trats.dts index 1c164f2..63cc571 100644
> --- a/arch/arm/boot/dts/exynos4210-trats.dts
> +++ b/arch/arm/boot/dts/exynos4210-trats.dts
> @@ -290,7 +290,12 @@
> };
>
> varm_breg: BUCK1 {
> - regulator-name = "VARM_1.2V_C210";
> + /*
> + * HACK: The real name is VARM_1.2V_C210,
> + * but exynos-cpufreq does not support
> + * DT-based regulator lookup yet.
> + */
> + regulator-name = "vdd_arm";
> regulator-min-microvolt = <900000>;
> regulator-max-microvolt = <1350000>;
> regulator-always-on;
Ping.
This patch fixes broken cpufreq on above two boards, so it would be nice to
have it merged for 3.12, even if it's a bit hacky, since it's too late for
proper solution at the moment. (It's already in development, though.)
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH RESEND REGRESSION] ARM: dts: exynos4210: Work around lack of cpufreq regulator lookup
2013-08-26 17:13 ` Tomasz Figa
@ 2013-09-25 14:10 ` Tomasz Figa
0 siblings, 0 replies; 3+ messages in thread
From: Tomasz Figa @ 2013-09-25 14:10 UTC (permalink / raw)
To: linux-arm-kernel
Exynos cpufreq drivers does not support device tree based regulator
lookup, so it can get the VDD ARM regulator only by its name. To get
cpufreq working for now, this patch works this around by renaming the
regulator in board dts files to vdd_arm, which is the name expected by
the driver.
This fixes a regression introduced by dropping support of board file
based bootup of Exynos 4210 boards that rendered cpufreq inoperable on
Trats and Origen boards.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 7 ++++++-
arch/arm/boot/dts/exynos4210-trats.dts | 7 ++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
Resending again, since my mail client previously freaked out and reset
message format to HTML...
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 382d8c7..46378fe 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -192,7 +192,12 @@
};
buck1_reg: BUCK1 {
- regulator-name = "VDD_ARM_1.2V";
+ /*
+ * HACK: The real name is VDD_ARM_1.2V,
+ * but exynos-cpufreq does not support
+ * DT-based regulator lookup yet.
+ */
+ regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 1c164f2..63cc571 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -290,7 +290,12 @@
};
varm_breg: BUCK1 {
- regulator-name = "VARM_1.2V_C210";
+ /*
+ * HACK: The real name is VARM_1.2V_C210,
+ * but exynos-cpufreq does not support
+ * DT-based regulator lookup yet.
+ */
+ regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-09-25 14:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-20 17:35 [PATCH] ARM: dts: exynos4210: Work around lack of cpufreq regulator lookup Tomasz Figa
2013-08-26 17:13 ` Tomasz Figa
2013-09-25 14:10 ` [PATCH RESEND REGRESSION] " Tomasz Figa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox