From mboxrd@z Thu Jan  1 00:00:00 1970
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: Fri, 14 Feb 2014 14:48:44 +0100
Subject: [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in
 device tree
In-Reply-To: <52FE1E14.5090400@cogentembedded.com>
References: <1392339605-20691-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
 <1392339605-20691-27-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
 <52FE1E14.5090400@cogentembedded.com>
Message-ID: <2244047.l1cecWDdMU@avalon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Sergei,

Thank you for the review.

On Friday 14 February 2014 17:45:56 Sergei Shtylyov wrote:
> On 14-02-2014 5:00, Laurent Pinchart wrote:
> > Enable the CMT0 device and configure channel 0 as a clock event
> > provider.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > 
> > diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h
> > b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 0b95bab..62b31f3
> > 100644
> > --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
> > +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
> > @@ -29,7 +29,6 @@ enum {
> >  };
> >   
> >  void r8a7790_add_standard_devices(void);
> > -void r8a7790_add_dt_devices(void);
> >  void r8a7790_clock_init(void);
> >  void r8a7790_pinmux_init(void);
> >  void r8a7790_pm_init(void);
> > diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c
> > b/arch/arm/mach-shmobile/setup-r8a7790.c index 3e5813f..462c81f 100644
> > --- a/arch/arm/mach-shmobile/setup-r8a7790.c
> > +++ b/arch/arm/mach-shmobile/setup-r8a7790.c
> > @@ -294,11 +294,6 @@ static struct resource cmt0_resources[] = {
> >   					  &cmt##idx##_platform_data,	\
> >   					  sizeof(struct sh_timer_config))
> > 
> > -void __init r8a7790_add_dt_devices(void)
> > -{
> > -	r8a7790_register_cmt(0);
> > -}
> > -
> >  void __init r8a7790_add_standard_devices(void)
> >  {
> >   	r8a7790_register_scif(0);
> > @@ -311,7 +306,7 @@ void __init r8a7790_add_standard_devices(void)
> >   	r8a7790_register_scif(7);
> >   	r8a7790_register_scif(8);
> >   	r8a7790_register_scif(9);
> > -	r8a7790_add_dt_devices();
> > +	r8a7790_register_cmt(0);
> >   	r8a7790_register_irqc(0);
> >   	r8a7790_register_thermal();
> >  }
> 
>     IMHO, these 2 files should be split into a separate patch.

That could easily be done, but why ?

-- 
Regards,

Laurent Pinchart