[PATCH v2 00/11] Add R8A7792/Blanche board support

[PATCH v2 00/11] Add R8A7792/Blanche board support

[Sergei Shtylyov]

Hello.

   Here's the set of 11 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20160530-v4.7-rc1' tag. We add the device tree support for
the R8A7792-based Blanche board. The R-Car 'clk' driver patch was posted last
week separately and 2 'clk' binding patches was split from this series and just
re-posted...

[01/13] ARM: shmobile: r8a7792: add clock index macros
[02/13] ARM: shmobile: r8a7792: add power domain index macros
[03/13] soc: renesas: rcar-sysc: add R8A7792 support
[04/13] ARM: shmobile: r8a7792: basic SoC support
[05/13] ARM: dts: r8a7792: initial SoC device tree
[06/13] ARM: dts: r8a7792: add SYS-DMAC support
[07/13] ARM: dts: r8a7792: add [H]SCIF support
[08/13] ARM dts: r8a7792: add IRQC support
[09/13] DT: arm: shmobile: document Blanche board
[10/13] ARM: dts: blanche: initial device tree
[11/13] ARM: dts: blanche: add Ethernet support

WBR, Sergei

[PATCH v2 04/11] ARM: shmobile: r8a7792: basic SoC support

[Sergei Shtylyov]

Add minimal support for the R-Car V2H (R8A7792) SoC.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- removed 'select I2C';
- added Simon's ACK and Geert's tag too.

 arch/arm/mach-shmobile/Kconfig         |    4 +++
 arch/arm/mach-shmobile/Makefile        |    1 
 arch/arm/mach-shmobile/setup-r8a7792.c |   34 +++++++++++++++++++++++++++++++++
 3 files changed, 39 insertions(+)

Index: renesas/arch/arm/mach-shmobile/Kconfig
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/Kconfig
+++ renesas/arch/arm/mach-shmobile/Kconfig
@@ -86,6 +86,10 @@ config ARCH_R8A7791
 	select ARCH_RCAR_GEN2
 	select I2C
 
+config ARCH_R8A7792
+	bool "R-Car V2H (R8A77920)"
+	select ARCH_RCAR_GEN2
+
 config ARCH_R8A7793
 	bool "R-Car M2-N (R8A7793)"
 	select ARCH_RCAR_GEN2
Index: renesas/arch/arm/mach-shmobile/Makefile
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/Makefile
+++ renesas/arch/arm/mach-shmobile/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o pm-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7792)	+= setup-r8a7792.o
 obj-$(CONFIG_ARCH_R8A7793)	+= setup-r8a7793.o
 obj-$(CONFIG_ARCH_R8A7794)	+= setup-r8a7794.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
Index: renesas/arch/arm/mach-shmobile/setup-r8a7792.c
===================================================================
--- /dev/null
+++ renesas/arch/arm/mach-shmobile/setup-r8a7792.c
@@ -0,0 +1,34 @@
+/*
+ * r8a7792 processor support
+ *
+ * Copyright (C) 2014  Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "rcar-gen2.h"
+
+static const char * const r8a7792_boards_compat_dt[] __initconst = {
+	"renesas,r8a7792",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7792_DT, "Generic R8A7792 (Flattened Device Tree)")
+	.init_early	= shmobile_init_delay,
+	.init_late	= shmobile_init_late,
+	.init_time	= rcar_gen2_timer_init,
+	.reserve	= rcar_gen2_reserve,
+	.dt_compat	= r8a7792_boards_compat_dt,
+MACHINE_END

[PATCH v2 05/11] ARM: dts: r8a7792: initial SoC device tree

[Sergei Shtylyov]

The initial R8A7792 SoC device tree including CPU core, GIC, timer, SYSC,
and the required  clock descriptions.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- explicitly included the IRQ header;
- removed the CPU1 node;
- removed the audio and PCIe bus clocks;
- removed the SDH, SD0, and SD1 CPG clocks;
- added RCAN and ADSP CPG clocks;
- removed the PLL1/2, Z2, ZS, I, B, P, CL, M2, RCLK, OSCCLK, ZB3, ZB3D2, DDR,
  and MP fixed factor clocks;
- fixed up the parent and divisor for the CP fixed factor clock;
- swapped  the SYS-DMAC0/1 clocks;
- removed  all gated clocks except the [H]SCIF, IRQC, and SYS-DMAC ones;
- created  the "soc" subnode, moving the SoC  device  nodes there;
- removed  the "clocks" node, moving its fixed clock  subnodes to the root and
  the MSTP subnodes into the "soc" node.

 arch/arm/boot/dts/r8a7792.dtsi |  171 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 171 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Device Tree Source for the r8a7792 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7792-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7792";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller at 0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller at f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		sysc: system-controller at e6180000 {
+			compatible = "renesas,r8a7792-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks at e6150000 {
+			compatible = "renesas,r8a7792-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "z", "rcan", "adsp";
+			#power-domain-cells = <0>;
+		};
+
+		/* Gate clocks */
+		mstp2_clks: mstp2_clks at e6150138 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
+			>;
+			clock-output-names = "sys-dmac1", "sys-dmac0";
+		};
+		mstp4_clks: mstp4_clks at e6150140 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp7_clks: mstp7_clks at e615014c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
+				R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
+				R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+			>;
+			clock-output-names = "hscif1", "hscif0", "scif3",
+					     "scif2", "scif1", "scif0",
+					     "du1", "du0";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* Fixed factor clocks */
+	zs_clk: zs {
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+		#clock-cells = <0>;
+		clock-div = <6>;
+		clock-mult = <1>;
+	};
+	p_clk: p {
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+		#clock-cells = <0>;
+		clock-div = <24>;
+		clock-mult = <1>;
+	};
+	cp_clk: cp {
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+		#clock-cells = <0>;
+		clock-div = <3>;
+		clock-mult = <1>;
+	};
+};

[PATCH v2 05/11] ARM: dts: r8a7792: initial SoC device tree

[Geert Uytterhoeven]

Hi Sergei,

On Fri, Jun 3, 2016 at 11:26 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> The initial R8A7792 SoC device tree including CPU core, GIC, timer, SYSC,
> and the required  clock descriptions.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> Changes in version 2:

> - created  the "soc" subnode, moving the SoC  device  nodes there;
> - removed  the "clocks" node, moving its fixed clock  subnodes to the root and
>   the MSTP subnodes into the "soc" node.
>
>  arch/arm/boot/dts/r8a7792.dtsi |  171 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 171 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
> ===================================================================
> --- /dev/null
> +++ renesas/arch/arm/boot/dts/r8a7792.dtsi

> +       /* Fixed factor clocks */
> +       zs_clk: zs {
> +               compatible = "fixed-factor-clock";
> +               clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> +               #clock-cells = <0>;
> +               clock-div = <6>;
> +               clock-mult = <1>;
> +       };
> +       p_clk: p {
> +               compatible = "fixed-factor-clock";
> +               clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> +               #clock-cells = <0>;
> +               clock-div = <24>;
> +               clock-mult = <1>;
> +       };
> +       cp_clk: cp {
> +               compatible = "fixed-factor-clock";
> +               clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> +               #clock-cells = <0>;
> +               clock-div = <3>;
> +               clock-mult = <1>;
> +       };

I think the above 3 fixed factor clocks should be children of the "soc" node,
as they're generated on-SoC.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 06/11] ARM: dts: r8a7792: add SYS-DMAC support

[Sergei Shtylyov]

Describe SYS-DMAC0/1 in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- resolved reject, indenting the device nodes that are now under the "soc" node;
- added Simon's ACK and Geert's tag too.

 arch/arm/boot/dts/r8a7792.dtsi |   64 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -79,6 +79,70 @@
 			#power-domain-cells = <1>;
 		};
 
+		dmac0: dma-controller at e6700000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller at e6720000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks at e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",

[PATCH v2 07/11] ARM: dts: r8a7792: add [H]SCIF support

[Sergei Shtylyov]

Describe [H]SCIFs in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- resolved reject, indenting the device nodes that are now under the "soc" node;
- added Geert's tag.

 arch/arm/boot/dts/r8a7792.dtsi |   90 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -143,6 +143,96 @@
 			dma-channels = <15>;
 		};
 
+		scif0: serial at e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial at e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial at e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial at e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial at e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial at e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks at e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",

[PATCH v2 08/11] ARM: dts: r8a7792: add IRQC support

[Sergei Shtylyov]

Describe the IRQC interrupt controller in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- resolved reject, indenting the IRQC node that is now under the "soc" node;
- added Geert's tag.

 arch/arm/boot/dts/r8a7792.dtsi |   13 +++++++++++++
 1 file changed, 13 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -61,6 +61,19 @@
 				      IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		irqc: interrupt-controller at e61c0000 {
+			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
 		timer {
 			compatible = "arm,armv7-timer";
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |

[PATCH v2 10/11] ARM: dts: blanche: initial device tree

[Sergei Shtylyov]

Add the initial device  tree for the R8A7792 SoC based Blanche board.
The board has 2 debug serial ports: SCIF0 and SCIF3; include support for
them,  so that  the serial console  can  work.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- added Simon's ACK and Geert's tag too.

 arch/arm/boot/dts/Makefile            |    1 
 arch/arm/boot/dts/r8a7792-blanche.dts |   44 ++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

Index: renesas/arch/arm/boot/dts/Makefile
===================================================================
--- renesas.orig/arch/arm/boot/dts/Makefile
+++ renesas/arch/arm/boot/dts/Makefile
@@ -638,6 +638,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&scif3 {
+	status = "okay";
+};

[PATCH v2 10/11] ARM: dts: blanche: initial device tree

[Sergei Shtylyov]

On 06/04/2016 12:35 AM, Sergei Shtylyov wrote:

> Add the initial device  tree for the R8A7792 SoC based Blanche board.
> The board has 2 debug serial ports: SCIF0 and SCIF3; include support for
> them,  so that  the serial console  can  work.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

[...]
> Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
> ===================================================================
> --- /dev/null
> +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -0,0 +1,44 @@
> +/*
> + * Device Tree Source for the Blanche board
> + *
> + * Copyright (C) 2016 Cogent Embedded, Inc.

    Looks like I need to add the Renesas Electronics copyright here. Pleae 
hold one merging this patch as well.

MBR, Sergei

[PATCH v2 11/11] ARM: dts: blanche: add Ethernet support

[Sergei Shtylyov]

R8A7792  SoC  doesn't have the EtherMAC core, so SMSC  LAN89218  Ethernet
chip was used instead on the Blanche board; this chip  is compatible with
SMSC LAN9115  for  which there's a (device tree aware) driver. Describe
the  chip in  the  Blanche device tree;  enable DHCP and NFS root in the
kernel command line for the kernel booting.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

---
Changes in version 2:
- added Simon's ACK.

 arch/arm/boot/dts/r8a7792-blanche.dts |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -29,6 +29,27 @@
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet at 18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+	};
 };
 
 &extal_clk {