[PATCH v2 0/3] arm64: dts: rockchip: introduce LinkEase EasePi R1

[PATCH v2 0/3] arm64: dts: rockchip: introduce LinkEase EasePi R1

[Liangbin Lian]

LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
---
Changes in v2:
- Change deprecated "rockchip,system-power-controller" to "system-power-controller"
- Link to v1: https://lore.kernel.org/r/20250925055906.83375-1-jjm2473@gmail.com/

---

[PATCH v2 1/3] dt-bindings: vendor-prefixes: Document LinkEase

[Liangbin Lian]

LinkEase is a company focusing on the research and development of
network equipment and related software and hardware from Shenzhen.

Add vendor prefix for it.

Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9ec8947dfcad..db496416b250 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -873,6 +873,8 @@ patternProperties:
     description: Lincoln Technology Solutions
   "^lineartechnology,.*":
     description: Linear Technology
+  "^linkease,.*":
+    description: Shenzhen LinkEase Network Technology Co., Ltd.
   "^linksprite,.*":
     description: LinkSprite Technologies, Inc.
   "^linksys,.*":
-- 
2.51.0

[PATCH v2 2/3] dt-bindings: arm: rockchip: Add LinkEase EasePi R1

[Liangbin Lian]

LinkEase EasePi R1 is a high-performance mini router based on RK3568.

Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 28db6bd6aa5b..ec2271cfb7e1 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -726,6 +726,11 @@ properties:
           - const: lckfb,tspi-rk3566
           - const: rockchip,rk3566
 
+      - description: LinkEase EasePi R1
+        items:
+          - const: linkease,easepi-r1
+          - const: rockchip,rk3568
+
       - description: Luckfox Core3576 Module based boards
         items:
           - enum:
-- 
2.51.0

[PATCH v2 3/3] arm64: dts: rockchip: add LinkEase EasePi R1

[Liangbin Lian]

LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3568-easepi-r1.dts    | 692 ++++++++++++++++++
 2 files changed, 693 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 099520962ffb..7646ffd7f309 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-easepi-r1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts b/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts
new file mode 100644
index 000000000000..3128692b0ceb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "LinkEase EasePi R1";
+	compatible = "linkease,easepi-r1", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc2;
+
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	dc_12v: regulator-dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	pcie30_avdd0v9: regulator-pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	regulator-vdd0v95-25glan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_25g_pin>;
+		enable-active-high;
+		gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd0v95_25glan";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_nvme: regulator-vcc3v3-nvme {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_nvme";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&dc_12v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_nvme_en>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-status {
+			gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			label = "green:status";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	phy-handle = <&rgmii_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	phy-handle = <&rgmii_phy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x26>;
+
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-0 = <&eth_phy1_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+/* ETH3 */
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+/* ETH2 */
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* M.2 Key for 2280 NVMe */
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_nvme>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+	gmac1 {
+		eth_phy1_reset_pin: eth-phy1-reset-pin {
+			rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins =
+				<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie-nic {
+		pwr_25g_pin: pwr-25g-pin {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	nvme {
+		vcc3v3_nvme_en: vcc3v3-nvme-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+/* Micro SD card slot is not mounted */
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "disable";
+};
+
+/* Wifi module is not mounted */
+&sdmmc2 {
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "disable";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* OTG Only USB2.0, Only device mode */
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.51.0

Re: [PATCH v2 0/3] arm64: dts: rockchip: introduce LinkEase EasePi R1

[Heiko Stübner]

Am Donnerstag, 25. September 2025, 11:20:34 Mitteleuropäische Sommerzeit schrieb Liangbin Lian:
> LinkEase EasePi R1 [1] is a high-performance mini router.
> 
> Specification:
> - Rockchip RK3568
> - 2GB/4GB LPDDR4 RAM
> - 16GB on-board eMMC
> - 1x M.2 key for 2280 NVMe (PCIe 3.0)
> - 1x USB 3.0 Type-A
> - 1x USB 2.0 Type-C (for USB flashing)
> - 2x 1000 Base-T (native, RTL8211F)
> - 2x 2500 Base-T (PCIe, RTL8125B)
> - 1x HDMI 2.0 Output
> - 12v DC Jack
> - 1x Power key connected to PMIC
> - 2x LEDs (one static power supplied, one GPIO controlled)
> 
> [1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
> 
> Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
> ---
> Changes in v2:
> - Change deprecated "rockchip,system-power-controller" to "system-power-controller"
> - Link to v1: https://lore.kernel.org/r/20250925055906.83375-1-jjm2473@gmail.com/

general process comment,  please don't send multiple versions on the
same day.

This splits reviewers attention (possibly reviewing outdated submissions),
doesn't give people actual time to review and also just fills up inboxes :-)


Heiko

Re: [PATCH v2 0/3] arm64: dts: rockchip: introduce LinkEase EasePi R1

[Rob Herring (Arm)]

On Thu, 25 Sep 2025 17:20:34 +0800, Liangbin Lian wrote:
> LinkEase EasePi R1 [1] is a high-performance mini router.
> 
> Specification:
> - Rockchip RK3568
> - 2GB/4GB LPDDR4 RAM
> - 16GB on-board eMMC
> - 1x M.2 key for 2280 NVMe (PCIe 3.0)
> - 1x USB 3.0 Type-A
> - 1x USB 2.0 Type-C (for USB flashing)
> - 2x 1000 Base-T (native, RTL8211F)
> - 2x 2500 Base-T (PCIe, RTL8125B)
> - 1x HDMI 2.0 Output
> - 12v DC Jack
> - 1x Power key connected to PMIC
> - 2x LEDs (one static power supplied, one GPIO controlled)
> 
> [1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
> 
> Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
> ---
> Changes in v2:
> - Change deprecated "rockchip,system-power-controller" to "system-power-controller"
> - Link to v1: https://lore.kernel.org/r/20250925055906.83375-1-jjm2473@gmail.com/
> 
> ---
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: failed to guess base

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/rockchip/' for 20250925092037.13582-1-jjm2473@gmail.com:

arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dtb: mmc@fe000000 (rockchip,rk3568-dw-mshc): status: 'oneOf' conditional failed, one must be fixed:
	['disable'] is not of type 'object'
	'disable' is not one of ['okay', 'disabled', 'reserved', 'fail', 'fail-needs-probe']
	from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dtb: mmc@fe2b0000 (rockchip,rk3568-dw-mshc): status: 'oneOf' conditional failed, one must be fixed:
	['disable'] is not of type 'object'
	'disable' is not one of ['okay', 'disabled', 'reserved', 'fail', 'fail-needs-probe']
	from schema $id: http://devicetree.org/schemas/dt-core.yaml#

Re: [PATCH v2 0/3] arm64: dts: rockchip: introduce LinkEase EasePi R1

[jjm2473]

Rob Herring (Arm) <robh@kernel.org> 于2025年9月25日周四 22:12写道：
>
>
> On Thu, 25 Sep 2025 17:20:34 +0800, Liangbin Lian wrote:
> > LinkEase EasePi R1 [1] is a high-performance mini router.
> >
> > Specification:
> > - Rockchip RK3568
> > - 2GB/4GB LPDDR4 RAM
> > - 16GB on-board eMMC
> > - 1x M.2 key for 2280 NVMe (PCIe 3.0)
> > - 1x USB 3.0 Type-A
> > - 1x USB 2.0 Type-C (for USB flashing)
> > - 2x 1000 Base-T (native, RTL8211F)
> > - 2x 2500 Base-T (PCIe, RTL8125B)
> > - 1x HDMI 2.0 Output
> > - 12v DC Jack
> > - 1x Power key connected to PMIC
> > - 2x LEDs (one static power supplied, one GPIO controlled)
> >
> > [1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
> >
> > Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
> > ---
> > Changes in v2:
> > - Change deprecated "rockchip,system-power-controller" to "system-power-controller"
> > - Link to v1: https://lore.kernel.org/r/20250925055906.83375-1-jjm2473@gmail.com/
> >
> > ---
> >
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
>   pip3 install dtschema --upgrade
>
>
> This patch series was applied (using b4) to base:
>  Base: attempting to guess base-commit...
>  Base: failed to guess base
>
> If this is not the correct base, please add 'base-commit' tag
> (or use b4 which does this automatically)
>
> New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/rockchip/' for 20250925092037.13582-1-jjm2473@gmail.com:
>
> arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dtb: mmc@fe000000 (rockchip,rk3568-dw-mshc): status: 'oneOf' conditional failed, one must be fixed:
>         ['disable'] is not of type 'object'
>         'disable' is not one of ['okay', 'disabled', 'reserved', 'fail', 'fail-needs-probe']
>         from schema $id: http://devicetree.org/schemas/dt-core.yaml#
> arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dtb: mmc@fe2b0000 (rockchip,rk3568-dw-mshc): status: 'oneOf' conditional failed, one must be fixed:
>         ['disable'] is not of type 'object'
>         'disable' is not one of ['okay', 'disabled', 'reserved', 'fail', 'fail-needs-probe']
>         from schema $id: http://devicetree.org/schemas/dt-core.yaml#
>
>
>
>
>

Thank you!
"disable" is a typo, should be 'disabled', `./scripts/checkpatch.pl`
doesn't mention this.
I'll fix it after review if there are no other issues.