From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
geert+renesas@glider.be, magnus.damm@gmail.com,
gregkh@linuxfoundation.org, mturquette@baylibre.com,
sboyd@kernel.org, yoshihiro.shimoda.uh@renesas.com,
biju.das.jz@bp.renesas.com, ulf.hansson@linaro.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
Date: Wed, 25 Sep 2024 10:50:24 +0300 [thread overview]
Message-ID: <23531a70-cf50-4b32-a9fd-81e6cfcbcf9d@tuxon.dev> (raw)
In-Reply-To: <CAMuHMdVQsHx0nC3xwQWVRWyWMnbXd1=RokNn8rkJv3bfG_0p-A@mail.gmail.com>
Hi, Geert,
On 24.09.2024 14:32, Geert Uytterhoeven wrote:
> Hi Claudiu,
>
> On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> The RZ/G3S SYS Controller has 2 registers (one for PCIE one for USB) that
>> need to be configured before/after powering off/on the PCI or USB
>> ares. The bits in these registers control signals to PCIE and USB that
>> need to be de-asserted/asserted after/before power on/off event. For this
>> add SYSC controller driver that registers a reset controller driver on
>> auxiliary bus which allows USB, PCIE drivers to control these signals.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Thanks for your patch!
>
>> --- /dev/null
>> +++ b/drivers/reset/reset-rzg3s-sysc.c
>> @@ -0,0 +1,140 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Renesas RZ/G3S SYSC reset driver
>> + *
>> + * Copyright (C) 2024 Renesas Electronics Corp.
>> + */
>> +
>> +#include <linux/auxiliary_bus.h>
>
> Using the Auxiliary Bus requires selecting AUXILIARY_BUS.
Thank you for pointing it. I'll adjust it in the next version, if it will
be one.
> Elsse you might run into build failures:
>
> aarch64-linux-gnu-ld: drivers/soc/renesas/rzg3s-sysc.o: in function
> `rzg3s_sysc_probe':
> rzg3s-sysc.c:(.text+0x21c): undefined reference to `auxiliary_device_init'
> aarch64-linux-gnu-ld: rzg3s-sysc.c:(.text+0x264): undefined reference
> to `__auxiliary_device_add'
> aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
> `rzg3s_sysc_reset_driver_init':
> reset-rzg3s-sysc.c:(.init.text+0x1c): undefined reference to
> `__auxiliary_driver_register'
> aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
> `rzg3s_sysc_reset_driver_exit':
> reset-rzg3s-sysc.c:(.exit.text+0x10): undefined reference to
> `auxiliary_driver_unregister'
>
> Gr{oetje,eeting}s,
>
> Geert
>
next prev parent reply other threads:[~2024-09-25 7:54 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 15:27 [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC Claudiu
2024-08-22 15:27 ` [PATCH 01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB Claudiu
2024-08-29 12:35 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S Claudiu
2024-08-22 16:42 ` Conor Dooley
2024-08-22 16:44 ` Conor Dooley
2024-08-23 7:59 ` claudiu beznea
2024-08-23 7:54 ` claudiu beznea
2024-08-23 16:18 ` Conor Dooley
2024-08-23 16:26 ` claudiu beznea
2024-08-23 16:33 ` Conor Dooley
2024-08-26 10:15 ` claudiu beznea
2024-08-26 17:09 ` Conor Dooley
2024-10-08 13:24 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset Claudiu
2024-08-22 16:45 ` Conor Dooley
2024-10-08 13:25 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S Claudiu
2024-09-24 11:32 ` Geert Uytterhoeven
2024-09-25 7:50 ` claudiu beznea [this message]
2024-10-08 13:54 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver Claudiu
2024-10-08 13:23 ` Geert Uytterhoeven
2024-10-09 8:26 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC Claudiu
2024-08-22 16:45 ` Conor Dooley
2024-10-08 14:46 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array Claudiu
2024-08-23 7:25 ` Biju Das
2024-08-23 8:05 ` claudiu beznea
2024-08-23 8:17 ` Biju Das
2024-10-08 14:46 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S Claudiu
2024-08-22 16:59 ` Biju Das
2024-08-23 8:40 ` claudiu beznea
2024-08-23 8:46 ` Biju Das
2024-10-08 14:47 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC Claudiu
2024-08-22 16:46 ` Conor Dooley
2024-10-08 14:51 ` Geert Uytterhoeven
2024-10-09 8:28 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus Claudiu
2024-08-23 7:35 ` Biju Das
2024-08-23 8:57 ` claudiu beznea
2024-08-23 9:01 ` Biju Das
2024-08-30 8:02 ` Vinod Koul
2024-08-30 8:06 ` Biju Das
2024-10-08 14:57 ` Geert Uytterhoeven
2024-10-09 8:31 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings Claudiu
2024-08-22 16:46 ` Conor Dooley
2024-10-08 14:58 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC Claudiu
2024-10-08 14:59 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 13/16] arm64: dts: renesas: Add #reset-cells to system controller node Claudiu
2024-10-08 14:59 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support Claudiu
2024-10-08 15:00 ` Geert Uytterhoeven
2024-08-22 15:28 ` [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable " Claudiu
2024-10-08 15:16 ` Geert Uytterhoeven
2024-10-09 8:42 ` claudiu beznea
2024-08-22 15:28 ` [PATCH 16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver Claudiu
2024-10-08 15:17 ` Geert Uytterhoeven
2024-08-29 15:26 ` [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC Ulf Hansson
2024-08-30 8:22 ` claudiu beznea
2024-08-30 10:14 ` Ulf Hansson
2024-08-30 11:32 ` claudiu beznea
2024-08-31 10:32 ` Ulf Hansson
2024-09-03 10:35 ` Ulf Hansson
2024-09-03 10:58 ` claudiu beznea
2024-09-03 11:50 ` Ulf Hansson
2024-08-31 5:13 ` Biju Das
2024-09-02 7:54 ` Biju Das
2024-09-02 8:47 ` claudiu beznea
2024-09-02 8:53 ` Biju Das
2024-09-02 9:14 ` claudiu beznea
2024-09-02 9:18 ` Biju Das
2024-09-02 10:40 ` claudiu beznea
2024-09-02 10:47 ` Biju Das
2024-09-03 7:18 ` Biju Das
2024-09-03 10:25 ` claudiu beznea
2024-09-03 10:31 ` Biju Das
2024-09-03 11:00 ` claudiu beznea
2024-09-03 11:07 ` Biju Das
2024-09-03 12:00 ` Biju Das
2024-09-03 12:25 ` claudiu beznea
2024-09-03 12:37 ` Biju Das
2024-09-03 12:57 ` claudiu beznea
2024-09-03 13:09 ` Biju Das
2024-09-03 14:46 ` claudiu beznea
2024-09-03 15:30 ` Biju Das
2024-09-03 13:45 ` Biju Das
2024-09-03 14:48 ` claudiu beznea
2024-11-07 10:00 ` Claudiu Beznea
2024-11-07 16:22 ` Philipp Zabel
2024-09-03 10:19 ` claudiu beznea
2024-09-02 8:28 ` claudiu beznea
2024-08-30 8:10 ` (subset) " Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=23531a70-cf50-4b32-a9fd-81e6cfcbcf9d@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).