[PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx

[philippe.retornaz@epfl.ch (Philippe Rétornaz)]

Le mercredi 30 mai 2012 18:08:38 Mark Brown a ?crit :
> On Tue, May 29, 2012 at 11:06:29AM +0200, Philippe R?tornaz wrote:
> > The MC13xxx PMIC is mainly used on i.Mx SoC. On thoses SoC the SPI
> > hardware will deassert CS line as soon as the SPI FIFO is empty.
> > The MC13xxx hardware is very sensitive to CS line change as it
> > corrupts the transfert if CS is deasserted in the middle of a register
> > read or write.
> > It is not possible to use the CS line as a GPIO on some SoC, so we
> > need to workaround this by implementing a single SPI transfer to
> > access the PMIC.
> 
> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> 
> though it's really sad this can't be done in the SPI controller where
> the bug is.  You should also set use_single_rw in the regmap_config,
> though this is less critical as currently the core won't automatically
> generate any bulk I/O.

I already put it in struct regmap_config, should I put it elsewhere ? 

@@ -54,6 +54,67 @@ static struct regmap_config mc13xxx_regmap_spi_config = {
        .max_register = MC13XXX_NUMREGS,
 
        .cache_type = REGCACHE_NONE,
+       .use_single_rw = 1,
+};

BTW, who will merge this patchset ? 

Thanks ! 

Philippe