From mboxrd@z Thu Jan  1 00:00:00 1970
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: Fri, 07 Mar 2014 17:14:01 +0100
Subject: [PATCH V3 00/12] CCF support for Renesas r7s72100
In-Reply-To: <1394208048-32495-1-git-send-email-wsa@the-dreams.de>
References: <1394208048-32495-1-git-send-email-wsa@the-dreams.de>
Message-ID: <2368991.bjBJjms8qn@avalon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Wolfram,

Thank you for the patches.

Beside the comment to patch 06/12, I would have moved patches 06/12 to 08/12 
to the beginning of the series, in order to avoid adding a clock workaround 
for the serial clock only to remove it a couple of patches later.

Oh, and one might ask you to fix the 80 columns checkpatch warnings for patch 
01/12 :-) 

On Friday 07 March 2014 17:00:36 Wolfram Sang wrote:
> This series moves the r7s72100 platfrom from the legacy clock implementation
> to the common clock framework.
> 
> This series has been tested with the renesas-devel-v3.14-rc5-20140307v2 tag.
> If you want to boot into a console, you have a runtime dependency [1].
> 
> Patches 1-5 is the minimal set to activate CCF and get the board booting
> into a console. Patches 6-8 add SCIF support, 9+10 I2C support, and 11+12
> SPI support.
> 
> Changes since V2:
> 
> Patches 1+3 got updates, patch 12 was not send out last time due to sendmail
> error.
> 
> Patch 1 should probably go via clock tree (it has no dependencies). The rest
> via shmobile. Please apply.
> 
>    Wolfram
> 
> PS: A tree can be found here with this series only:
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/r7s-ccf
> 
> And here with a quick hack to make the system bootable:
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
> renesas/r7s-ccf-bootable
> 
> [1] http://lkml.org/lkml/2014/2/20/205 ([PATCH V7 0/3] clocksource:
> Consolidate SH and ARM mach-shmobile Kconfig bits)
> 
> 
> Wolfram Sang (12):
>   clk: shmobile: add CPG driver for rz-platforms
>   ARM: shmobile: r7s72100: document MSTP clock support
>   ARM: shmobile: r7s72100: add essential clock nodes to dtsi
>   ARM: shmobile: r7s72100: genmai: populate nodes for external clocks
>   ARM: shmobile: r7s72100: use workaround for non DT-clocks
>   ARM: shmobile: r7s72100: add scif nodes to dtsi
>   ARM: shmobile: r7s72100: genmai: activate scif2 for console output
>   ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy
>     support
>   ARM: shmobile: r7s72100: add i2c clocks to dtsi
>   ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock
>     support
>   ARM: shmobile: r7s72100: add spi clocks to dtsi
>   ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock
>     support
> 
>  .../bindings/clock/renesas,cpg-mstp-clocks.txt     |   1 +
>  .../bindings/clock/renesas,rz-cpg-clocks.txt       |  29 +++
>  arch/arm/boot/dts/r7s72100-genmai-reference.dts    |  12 ++
>  arch/arm/boot/dts/r7s72100.dtsi                    | 223
> ++++++++++++++++++++- arch/arm/mach-shmobile/board-genmai-reference.c    | 
> 14 +-
>  arch/arm/mach-shmobile/board-genmai.c              |  44 ++++
>  arch/arm/mach-shmobile/clock-r7s72100.c            |   9 -
>  arch/arm/mach-shmobile/setup-r7s72100.c            |  43 ----
>  drivers/clk/shmobile/Makefile                      |   1 +
>  drivers/clk/shmobile/clk-rz.c                      | 103 ++++++++++
>  include/dt-bindings/clock/r7s72100-clock.h         |  40 ++++
>  11 files changed, 464 insertions(+), 55 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt create
> mode 100644 drivers/clk/shmobile/clk-rz.c
>  create mode 100644 include/dt-bindings/clock/r7s72100-clock.h

-- 
Regards,

Laurent Pinchart