[PATCH v1 0/6] Support the rk3036 Kylin board

[heiko@sntech.de (Heiko Stübner)]

Hi Caesar,

Am Sonntag, 20. Dezember 2015, 20:49:14 schrieb Caesar Wang:
> Hi Heiko,
> 
> ? 2015?12?20? 01:16, Heiko St?bner ??:
> > Hi Caesar,
> > 
> > Am Donnerstag, 17. Dezember 2015, 22:21:46 schrieb Caesar Wang:
> >> Kylin-board is based on RK3036 SOCs, add the initiation
> >> version for working.
> > 
> > I've applied:
> > - patch1 (please include the "rockchip:" part in dts subjects)
> > - patch3 (dito)
> > - patch4 (after merging in patch6 and dropping the hdmi+lcdc parts)
> 
> Okay, thanks!
> 
> Sync to the rockchip github
> <https://github.com/rockchip-linux/kernel/commits/develop4.4>.
> 
> > Please resubmit the missing parts (audio + graphics) against my dts-branch
> > [0] after the relevant maintainers have added the code-parts to their
> > trees.
> For codec:
> RT5616 is existing  in
> https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=for-ne
> xt now.

that seems to be missing the devicetree-parts. I think you can just send a 
patch to Mark adding
- of_device_id match table
- of_match_table assignment
- binding-documentation (it seems to have only compatible and reg propeties)


Heiko

> For 3036 vop:
> I would like wait a moment from Mark Yao updating the driver.
> 
> > Thanks
> > Heiko
> > 
> > [0]
> > https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log
> > /?h=v4.5-armsoc/dts32> 
> >> This series patches have the following decriptions:
> >> 
> >> PATCH[1/6]:
> >> ARM: dts: fix the correct pinctrl control for rk3036
> >> 
> >> The pinctrl gpio pull up/down is incorrect since the rk3036 SoCs
> >> can't set the status in the internal.
> >> ---
> >> 
> >> PATCH[2/6]:
> >> ARM: dts: add the lcdc and hdmi node for rk3036
> >> 
> >> Add the devices is related to display.
> >> Based on the series patches of Mark Yao's
> >> ---
> >> 
> >> PATCH[3/6]:
> >> ARM: dts: add the sdio/sdmmc node for rk3036
> >> 
> >> Add the wifi/sd card work for kylin board.
> >> ---
> >> 
> >> PATCH[4/6]:
> >> ARM: dts: rockchip: add the kylin board for rk3036
> >> 
> >> Add the dts for kylin board.
> >> ---
> >> 
> >> PATCH[5/6]:
> >> ARM: dts: add the sound codec for kylin board
> >> 
> >> Make the codec rt5616 working on kylin board.
> >> The realteak have been upstream for Mark Brown,
> >> I guess need some days to review.
> >> 
> >> ---
> >> 
> >> PATCH[6/6]:
> >> ARM: dts: add the sdio node for kylin board
> >> 
> >> Enable the sdio for kylin board.
> >> ---
> >> 
> >> Caesar Wang (6):
> >>    ARM: dts: fix the correct pinctrl control for rk3036
> >>    ARM: dts: add the lcdc and hdmi node for rk3036
> >>    ARM: dts: add the sdio/sdmmc node for rk3036
> >>    ARM: dts: rockchip: add the kylin board for rk3036
> >>    ARM: dts: add the sound codec for kylin board
> >>    ARM: dts: add the sdio node for kylin board
> >>   
> >>   Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
> >>   arch/arm/boot/dts/Makefile                         |   1 +
> >>   arch/arm/boot/dts/rk3036-kylin.dts                 | 345
> >> 
> >> +++++++++++++++++++++ arch/arm/boot/dts/rk3036.dtsi                     
> >> |
> >> 167 ++++++++-- 4 files changed, 498 insertions(+), 19 deletions(-)
> >> 
> >>   create mode 100644 arch/arm/boot/dts/rk3036-kylin.dts
> > 
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip