From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Ryan.Wanner@microchip.com, mturquette@baylibre.com,
sboyd@kernel.org, nicolas.ferre@microchip.com,
alexandre.belloni@bootlin.com
Cc: varshini.rajendran@microchip.com, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, robh@kernel.org
Subject: Re: [PATCH v3 13/32] clk: at91: sama7d65: switch to parent_hw and parent_data
Date: Sat, 6 Sep 2025 21:39:40 +0300 [thread overview]
Message-ID: <2377eaff-6142-45ef-a966-0176c147c094@tuxon.dev> (raw)
In-Reply-To: <676e618850df0db8dd880c36cd9b6dcef7b17b8b.1752176711.git.Ryan.Wanner@microchip.com>
On 7/10/25 23:07, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
>
> Switch the system clocks to use parent_hw and parent_data. Having this
> allows the driver to conform to the new clk-system API.
>
> The parent registration is after the USBCK registration due to one of
> the system clocks being dependent on USBCK.
>
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> ---
> drivers/clk/at91/sama7d65.c | 37 +++++++++++++++++++++++--------------
> 1 file changed, 23 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/clk/at91/sama7d65.c b/drivers/clk/at91/sama7d65.c
> index f10faabc7ffe..1553dc3152a4 100644
> --- a/drivers/clk/at91/sama7d65.c
> +++ b/drivers/clk/at91/sama7d65.c
> @@ -533,23 +533,23 @@ static struct {
> /*
> * System clock description
> * @n: clock name
> - * @p: clock parent name
> + * @p: clock parent hw
> * @id: clock id
> */
> -static const struct {
> +static struct {
> const char *n;
> - const char *p;
> + struct clk_hw *parent_hw;
> u8 id;
> } sama7d65_systemck[] = {
> - { .n = "uhpck", .p = "usbck", .id = 6 },
> - { .n = "pck0", .p = "prog0", .id = 8, },
> - { .n = "pck1", .p = "prog1", .id = 9, },
> - { .n = "pck2", .p = "prog2", .id = 10, },
> - { .n = "pck3", .p = "prog3", .id = 11, },
> - { .n = "pck4", .p = "prog4", .id = 12, },
> - { .n = "pck5", .p = "prog5", .id = 13, },
> - { .n = "pck6", .p = "prog6", .id = 14, },
> - { .n = "pck7", .p = "prog7", .id = 15, },
> + { .n = "uhpck", .id = 6 },
> + { .n = "pck0", .id = 8, },
> + { .n = "pck1", .id = 9, },
> + { .n = "pck2", .id = 10, },
> + { .n = "pck3", .id = 11, },
> + { .n = "pck4", .id = 12, },
> + { .n = "pck5", .id = 13, },
> + { .n = "pck6", .id = 14, },
> + { .n = "pck7", .id = 15, },
> };
>
> /* Mux table for programmable clocks. */
> @@ -1283,10 +1283,19 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
>
> sama7d65_pmc->pchws[i] = hw;
> }
> -
Worth keeping this blank line.
> + /* Set systemck parent hws. */
> + sama7d65_systemck[0].parent_hw = usbck_hw;
> + sama7d65_systemck[1].parent_hw = sama7d65_pmc->pchws[0];
> + sama7d65_systemck[2].parent_hw = sama7d65_pmc->pchws[1];
> + sama7d65_systemck[3].parent_hw = sama7d65_pmc->pchws[2];
> + sama7d65_systemck[4].parent_hw = sama7d65_pmc->pchws[3];
> + sama7d65_systemck[5].parent_hw = sama7d65_pmc->pchws[4];
> + sama7d65_systemck[6].parent_hw = sama7d65_pmc->pchws[5];
> + sama7d65_systemck[7].parent_hw = sama7d65_pmc->pchws[6];
> + sama7d65_systemck[8].parent_hw = sama7d65_pmc->pchws[7];
> for (i = 0; i < ARRAY_SIZE(sama7d65_systemck); i++) {
> hw = at91_clk_register_system(regmap, sama7d65_systemck[i].n,
> - sama7d65_systemck[i].p, NULL,
> + NULL, &AT91_CLK_PD_HW(sama7d65_systemck[i].parent_hw),
> sama7d65_systemck[i].id, 0);
> if (IS_ERR(hw))
> goto err_free;
next prev parent reply other threads:[~2025-09-06 19:11 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-10 20:06 [PATCH v3 00/32] clk: at91: add support for parent_data and Ryan.Wanner
2025-07-10 20:06 ` [PATCH v3 01/32] clk: at91: pmc: add macros for clk_parent_data Ryan.Wanner
2025-08-28 16:52 ` Brian Masney
2025-09-06 18:33 ` claudiu beznea
2025-09-16 1:21 ` Stephen Boyd
2025-07-10 20:06 ` [PATCH v3 02/32] clk: at91: pmc: Move macro to header file Ryan.Wanner
2025-08-28 16:53 ` Brian Masney
2025-07-10 20:06 ` [PATCH v3 03/32] clk: at91: sam9x75: switch to parent_hw and parent_data Ryan.Wanner
2025-08-28 17:38 ` Brian Masney
2025-09-06 18:33 ` Claudiu Beznea
2025-07-10 20:06 ` [PATCH v3 04/32] clk: at91: clk-sam9x60-pll: use clk_parent_data Ryan.Wanner
2025-08-28 17:04 ` Brian Masney
2025-09-06 18:34 ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 05/32] clk: at91: clk-peripheral: switch to clk_parent_data Ryan.Wanner
2025-09-06 18:34 ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 06/32] clk: at91: clk-main: switch to clk parent data Ryan.Wanner
2025-09-06 18:35 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 07/32] clk: at91: clk-utmi: use clk_parent_data Ryan.Wanner
2025-09-06 18:36 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 08/32] clk: at91: clk-master: " Ryan.Wanner
2025-09-06 18:36 ` claudiu beznea
2025-09-16 17:35 ` Ryan Wanner
2025-09-17 6:49 ` Claudiu Beznea
2025-07-10 20:07 ` [PATCH v3 09/32] clk: at91: clk-programmable: " Ryan.Wanner
2025-09-06 18:36 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 10/32] clk: at91: clk-generated: " Ryan.Wanner
2025-09-06 18:37 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 11/32] clk: at91: clk-usb: add support for clk_parent_data Ryan.Wanner
2025-09-06 18:37 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 12/32] clk: at91: clk-system: use clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 13/32] clk: at91: sama7d65: switch to parent_hw and parent_data Ryan.Wanner
2025-09-06 18:39 ` claudiu beznea [this message]
2025-07-10 20:07 ` [PATCH v3 14/32] clk: at91: clk-pll: add support for parent_hw Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 15/32] clk: at91: clk-audio-pll: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 16/32] clk: at91: clk-plldiv: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 17/32] clk: at91: clk-h32mx: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 18/32] clk: at91: clk-i2s-mux: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 19/32] clk: at91: clk-smd: add support for clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 20/32] clk: at91: clk-slow: add support for parent_hw Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 21/32] clk: at91: dt-compat: switch to parent_hw and parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 22/32] clk: at91: sam9x60: " Ryan.Wanner
2025-09-06 18:46 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 23/32] clk: at91: sama5d2: " Ryan.Wanner
2025-09-06 18:48 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 24/32] clk: at91: sama5d3: " Ryan.Wanner
2025-09-06 18:49 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 25/32] clk: at91: sama5d4: " Ryan.Wanner
2025-09-06 18:51 ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 26/32] clk: at91: at91sam9x5: " Ryan.Wanner
[not found] ` <10f016fd-2ceb-40b0-a81d-9c5663f65191@tuxon.dev>
2025-09-06 18:52 ` Claudiu Beznea
2025-07-10 20:07 ` [PATCH v3 27/32] clk: at91: at91rm9200: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 28/32] clk: at91: at91sam9260: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 29/32] clk: at91: at91sam9g45: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 30/32] clk: at91: at91sam9n12: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 31/32] clk: at91: at91sam9rl: switch to clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 32/32] clk: at91: sam9x7: Clean up formatting Ryan.Wanner
2025-08-27 20:31 ` [PATCH v3 00/32] clk: at91: add support for parent_data and Ryan Wanner
2025-08-28 15:51 ` Brian Masney
2025-08-28 16:16 ` Ryan Wanner
2025-08-28 16:48 ` Brian Masney
2025-08-28 20:40 ` Konstantin Ryabitsev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2377eaff-6142-45ef-a966-0176c147c094@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=Ryan.Wanner@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).