[PATCH] ARM: dts: Correct the pin configuration for eMMC

[t.figa@samsung.com (Tomasz Figa)]

Hi Shirish,

On Monday 11 of February 2013 05:01:28 Shirish S wrote:
> This patch corrects the pin function value of sd4_bus8 from 3
> to 4.
> This is verified on origen board for testing eMMC on
> dw_mci controller.
> 
> Signed-off-by: Shirish S <s.shirish@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
> b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 8e6115a..099cec7
> 100644
> --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
> @@ -661,7 +661,7 @@
> 
>  		sd4_bus8: sd4-bus-width8 {
>  			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
> -			samsung,pin-function = <3>;
> +			samsung,pin-function = <4>;
>  			samsung,pin-pud = <4>;
>  			samsung,pin-drv = <3>;
>  		};

IMHO name of the patch is a bit misleading, as on many Exynos4x12-based 
boards sdhci-s3c is used for eMMC. I think following would be better:

ARM: dts: exynos4x12-pinctrl: Correct pin configuration of SD 4

Best regards,
-- 
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Linux Platform