public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/6] Add support for the ICU unit in Marvell Armada 7K/8K
Date: Wed, 21 Jun 2017 16:47:20 +0100	[thread overview]
Message-ID: <245df82c-60b1-bc4b-e343-5435713c453c@arm.com> (raw)
In-Reply-To: <87r2yd1h5x.fsf@free-electrons.com>

On 21/06/17 16:42, Gregory CLEMENT wrote:
> Hi Marc and Thomas,
>  
>  On mer., juin 21 2017, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote:
> 
>> Hello,
>>
>> On Wed, 21 Jun 2017 16:14:21 +0100, Marc Zyngier wrote:
>>
>>>> Thomas Petazzoni (6):
>>>>   dt-bindings: interrupt-controller: add DT binding for the Marvell GICP
>>>>   dt-bindings: interrupt-controller: add DT binding for the Marvell ICU
>>>>   irqchip: irq-mvebu-gicp: new driver for Marvell GICP
>>>>   irqchip: irq-mvebu-icu: new driver for Marvell ICU
>>>>   arm64: marvell: enable ICU and GICP drivers
>>>>   arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
>>>>
>>>>  .../bindings/interrupt-controller/marvell,gicp.txt |  27 ++
>>>>  .../bindings/interrupt-controller/marvell,icu.txt  |  51 ++++
>>>>  arch/arm64/Kconfig.platforms                       |   2 +
>>>>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi      |   7 +
>>>>  .../boot/dts/marvell/armada-cp110-master.dtsi      |  59 +++--
>>>>  .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi |  55 ++--
>>>>  drivers/irqchip/Kconfig                            |   6 +
>>>>  drivers/irqchip/Makefile                           |   2 +
>>>>  drivers/irqchip/irq-mvebu-gicp.c                   | 279 ++++++++++++++++++++
>>>>  drivers/irqchip/irq-mvebu-gicp.h                   |  12 +
>>>>  drivers/irqchip/irq-mvebu-icu.c                    | 289 +++++++++++++++++++++
>>>>  .../dt-bindings/interrupt-controller/mvebu-icu.h   |  15 ++
>>>>  12 files changed, 756 insertions(+), 48 deletions(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
>>>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
>>>>  create mode 100644 drivers/irqchip/irq-mvebu-gicp.c
>>>>  create mode 100644 drivers/irqchip/irq-mvebu-gicp.h
>>>>  create mode 100644 drivers/irqchip/irq-mvebu-icu.c
>>>>  create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h
>>>>   
>>>
>>> It all looks good to me. How do we merge this? I take the first five
>>> patches and Gregory takes the last one?
>>
>> I think you should take the first four patches, and Gr?gory takes the
>> last two ones. But I'll let Gr?gory confirm.
> 
> Indeed it makes more sens to merge the patch 4 through the arm-soc
> subsystem.

Hmmm. You mean patches 5 and 6, right? And I queue 1 to 4?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2017-06-21 15:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-21 13:29 [PATCH v5 0/6] Add support for the ICU unit in Marvell Armada 7K/8K Thomas Petazzoni
2017-06-21 13:29 ` [PATCH v5 1/6] dt-bindings: interrupt-controller: add DT binding for the Marvell GICP Thomas Petazzoni
2017-06-26 18:04   ` Rob Herring
2017-06-21 13:29 ` [PATCH v5 2/6] dt-bindings: interrupt-controller: add DT binding for the Marvell ICU Thomas Petazzoni
2017-06-22 21:18   ` Rob Herring
2017-06-21 13:29 ` [PATCH v5 3/6] irqchip: irq-mvebu-gicp: new driver for Marvell GICP Thomas Petazzoni
2017-06-21 13:29 ` [PATCH v5 4/6] irqchip: irq-mvebu-icu: new driver for Marvell ICU Thomas Petazzoni
2017-06-21 13:29 ` [PATCH v5 5/6] arm64: marvell: enable ICU and GICP drivers Thomas Petazzoni
2017-06-21 15:50   ` Gregory CLEMENT
2017-06-21 13:29 ` [PATCH v5 6/6] arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K Thomas Petazzoni
2017-06-21 15:50   ` Gregory CLEMENT
2017-06-21 15:14 ` [PATCH v5 0/6] Add support for the ICU unit in Marvell " Marc Zyngier
2017-06-21 15:18   ` Thomas Petazzoni
2017-06-21 15:42     ` Gregory CLEMENT
2017-06-21 15:47       ` Marc Zyngier [this message]
2017-06-21 15:50         ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=245df82c-60b1-bc4b-e343-5435713c453c@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox