[PATCH v8 3/8] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()

[heiko@sntech.de (Heiko Stuebner)]

Am Mittwoch, 11. Mai 2016, 03:24:07 schrieb David Wu:
> Call rk3x_i2c_setup() before rk3x_i2c_start()

That beginning of the sentence could use a tiny improvement, like

----
rk3x_i2c_setup() gets called directly before rk3x_i2c_start()
----

to make it obvious what happens in the code.

But a nice small improvement
Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> and the last thing in setup was to clean the IPD,
> so no reason to do it at the beginning of start.
> 
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> Change in v8:
> - none
> 
>  drivers/i2c/busses/i2c-rk3x.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 1e2677a..9eeb4e5 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -174,7 +174,6 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c)
>  {
>  	u32 val;
> 
> -	rk3x_i2c_clean_ipd(i2c);
>  	i2c_writel(i2c, REG_INT_START, REG_IEN);
> 
>  	/* enable adapter with correct mode, send START condition */