[PATCH v3 05/11] soc: renesas: rcar-sysc: Enable Clock Domain for r8a7795 I/O devices

[laurent.pinchart@ideasonboard.com (Laurent Pinchart)]

Hi Geert,

Thank you for the patch.

On Wednesday 09 March 2016 20:18:41 Geert Uytterhoeven wrote:
> On R-Car H3, some power areas (e.g. A3VP) contain I/O devices, which are
> also part of the CPG/MSSR Clock Domain.  Hook up the CPG/MSSR Clock
> Domain attach/detach callbacks to enable power management using module
> clocks.
> 
> This also allows to support the Clock Domain for devices in the
> "always-on" power area.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> ---
> v3:
>   - Hook up the CPG/MSSR Clock Domain attach/detach callbacks instead of
>     using our own copies,
> 
> v2:
>   - New.
> ---
>  drivers/soc/renesas/rcar-sysc.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/soc/renesas/rcar-sysc.c
> b/drivers/soc/renesas/rcar-sysc.c index 28af0b704fc008d2..2d6fbeb481883be7
> 100644
> --- a/drivers/soc/renesas/rcar-sysc.c
> +++ b/drivers/soc/renesas/rcar-sysc.c
> @@ -9,6 +9,7 @@
>   * for more details.
>   */
> 
> +#include <linux/clk/renesas.h>
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/mm.h>
> @@ -251,6 +252,15 @@ static void __init rcar_sysc_pd_setup(struct
> device_node *np, gov = &pm_domain_always_on_gov;
>  	}
> 
> +#ifdef CONFIG_ARCH_R8A7795

This is fine for now as the R8A7795 is the only ARM64 model in the R-Car 
family, but how do you plan to move forward on this ? Will it be enabled for 
ARM64 SoCs straight away, and for ARM32 SoCs when switching from the cpg to 
the always-on power domain ?

> +	if (!(pd->flags & (PD_CPU | PD_SCU))) {
> +		/* Enable Clock Domain for I/O devices */
> +		genpd->flags = GENPD_FLAG_PM_CLK;
> +		genpd->attach_dev = cpg_mssr_attach_dev;
> +		genpd->detach_dev = cpg_mssr_detach_dev;
> +	}
> +#endif
> +
>  	pm_genpd_init(genpd, gov, false);
>  	genpd->dev_ops.active_wakeup = rcar_sysc_active_wakeup;
>  	genpd->power_off = rcar_sysc_pd_power_off;

-- 
Regards,

Laurent Pinchart