From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
Date: Fri, 17 Dec 2010 10:18:39 +0530 [thread overview]
Message-ID: <252f6bd3f3d077d771418d374eee173d@mail.gmail.com> (raw)
In-Reply-To: <1292521858-3810-3-git-send-email-j-pihet@ti.com>
> -----Original Message-----
> From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
> owner at vger.kernel.org] On Behalf Of jean.pihet at newoldbits.com
> Sent: Thursday, December 16, 2010 11:21 PM
> To: linux-omap at vger.kernel.org
> Cc: khilman at deeprootsystems.com; linux-arm-kernel at lists.infradead.org;
> Jean Pihet
> Subject: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
>
> From: Jean Pihet <j-pihet@ti.com>
>
> The SRAM PA addresses are locally defined and used in both the
> SRAM management code and the idle sleep code.
> A global macro defines the values at a centralized place, for
> easier maintenance.
>
> Tested on N900 and Beagleboard with full RET and OFF modes,
> using cpuidle and suspend.
>
> Signed-off-by: Jean Pihet <j-pihet@ti.com>
> ---
> arch/arm/mach-omap2/sdrc.h | 7 +++++++
> arch/arm/plat-omap/sram.c | 7 ++-----
> 2 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
> index 68f57bb..ada596b 100644
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -74,5 +74,12 @@ static inline u32 sms_read_reg(u16 reg)
> */
> #define SDRC_MPURATE_LOOPS 96
>
> +/*
> + * OMAP2+: define the SRAM PA addresses.
> + * Used by the SRAM management code and the idle sleep code.
> + */
> +#define OMAP2_SRAM_PA 0x40200000
> +#define OMAP3_SRAM_PA 0x40200000
> +#define OMAP4_SRAM_PA 0x40300000
>
Header choice is wrong. Certainly SDRC is not the place.
Right place should be "#include <plat/sram.h>"
OMAP4 doesn't even have SDRC IP
> #endif
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 819ea0c..1a686c8 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -41,15 +41,12 @@
>
> #define OMAP1_SRAM_PA 0x20000000
> #define OMAP1_SRAM_VA VMALLOC_END
> -#define OMAP2_SRAM_PA 0x40200000
> -#define OMAP2_SRAM_PUB_PA 0x4020f800
> +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
> #define OMAP2_SRAM_VA 0xfe400000
> #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
> -#define OMAP3_SRAM_PA 0x40200000
> #define OMAP3_SRAM_VA 0xfe400000
> -#define OMAP3_SRAM_PUB_PA 0x40208000
> +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
> #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
> -#define OMAP4_SRAM_PA 0x40300000
> #define OMAP4_SRAM_VA 0xfe400000
> #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
> #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-12-17 4:48 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-16 17:50 [PATCH 0/7 v4] OMAP3: clean up ASM sleep code jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 1/7] OMAP3: remove unused code from the " jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet at newoldbits.com
2010-12-17 4:48 ` Santosh Shilimkar [this message]
2010-12-17 10:13 ` Jean Pihet
2010-12-16 17:50 ` [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 4/7] OMAP3: re-organize " jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths jean.pihet at newoldbits.com
2010-12-17 5:04 ` Santosh Shilimkar
2010-12-17 10:14 ` Jean Pihet
2010-12-16 17:50 ` [PATCH 6/7] OMAP3: add comments for low power code errata jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 7/7] OMAP3: ASM sleep code format rework jean.pihet at newoldbits.com
2010-12-17 5:09 ` Santosh Shilimkar
2010-12-17 10:16 ` Jean Pihet
2010-12-16 18:26 ` [PATCH 0/7 v4] OMAP3: clean up ASM sleep code Tony Lindgren
2010-12-17 5:05 ` Santosh Shilimkar
2010-12-17 10:18 ` Jean Pihet
2010-12-17 10:20 ` Santosh Shilimkar
-- strict thread matches above, loose matches on Subject: below --
2010-12-17 10:08 [PATCH 0/7 v5] " jean.pihet at newoldbits.com
2010-12-17 10:08 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet at newoldbits.com
2010-12-17 10:36 ` Santosh Shilimkar
2010-12-17 13:34 ` Nishanth Menon
2010-12-17 14:59 ` Jean Pihet
2010-12-17 15:00 ` Nishanth Menon
2010-12-18 15:44 [PATCH 0/7 v6] OMAP3: clean up ASM sleep code jean.pihet at newoldbits.com
2010-12-18 15:44 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet at newoldbits.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=252f6bd3f3d077d771418d374eee173d@mail.gmail.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).