From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] ARM: dts: r8a7794: add sound support
Date: Wed, 10 Feb 2016 00:58:48 +0300 [thread overview]
Message-ID: <2543047.yYrDdYb9v5@wasted.cogentembedded.com> (raw)
In-Reply-To: <12033353.rt0nolnBmD@wasted.cogentembedded.com>
Define the generic R8A7794 part of the sound device node.
This sound device is a complex one and comprises the Audio Clock Generator
(ADG), Sampling Rate Converter Unit (SCU), Serial Sound Interface [Unit]
(SSI[U]), and Audio DMAC-Peripheral-Peripheral.
It is up to the board file to enable the device.
This patch is based on the R8A7791 sound work by Kuninori Morimoto.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added "ctu.[01]", "mix.[01]", "dvc.[01]" to the "clock-names" prop;
- added CTU/DVC/MIX subnodes;
- removed SRC0/7/8/9 subnodes;
- added missing colon to the subject.
arch/arm/boot/dts/r8a7794.dtsi | 182 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 182 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -1309,4 +1309,186 @@
#iommu-cells = <1>;
status = "disabled";
};
+
+ rcar_sound: sound at ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7794",
+ "renesas,rcar_sound-gen2";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7794_CLK_SSI9>,
+ <&mstp10_clks R8A7794_CLK_SSI8>,
+ <&mstp10_clks R8A7794_CLK_SSI7>,
+ <&mstp10_clks R8A7794_CLK_SSI6>,
+ <&mstp10_clks R8A7794_CLK_SSI5>,
+ <&mstp10_clks R8A7794_CLK_SSI4>,
+ <&mstp10_clks R8A7794_CLK_SSI3>,
+ <&mstp10_clks R8A7794_CLK_SSI2>,
+ <&mstp10_clks R8A7794_CLK_SSI1>,
+ <&mstp10_clks R8A7794_CLK_SSI0>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC9>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC8>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC7>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
+ <&mstp10_clks R8A7794_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+ <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+ <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+ <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+ <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
+ <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
+ <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+ <&m2_clk>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6", "src.5",
+ "src.4", "src.3", "src.2", "src.1", "src.0",
+ "ctu.0", "ctu.1",
+ "mix.0", "mix.1",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&cpg_clocks>;
+
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc at 0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc at 1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix at 0 { };
+ mix1: mix at 1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu at 0 { };
+ ctu01: ctu at 1 { };
+ ctu02: ctu at 2 { };
+ ctu03: ctu at 3 { };
+ ctu10: ctu at 4 { };
+ ctu11: ctu at 5 { };
+ ctu12: ctu at 6 { };
+ ctu13: ctu at 7 { };
+ };
+
+ rcar_sound,src {
+ src1: src at 1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma0 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src at 2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma0 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src at 3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src at 4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src at 5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src at 6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi at 0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma0 0x02>,
+ <&audma0 0x15>, <&audma0 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi at 1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma0 0x04>,
+ <&audma0 0x49>, <&audma0 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi at 2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma0 0x06>,
+ <&audma0 0x63>, <&audma0 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi at 3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma0 0x08>,
+ <&audma0 0x6f>, <&audma0 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi at 4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma0 0x0a>,
+ <&audma0 0x71>, <&audma0 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi at 5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+ <&audma0 0x73>, <&audma0 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi at 6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+ <&audma0 0x75>, <&audma0 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi at 7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma0 0x10>,
+ <&audma0 0x79>, <&audma0 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi at 8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma0 0x12>,
+ <&audma0 0x7b>, <&audma0 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi at 9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma0 0x14>,
+ <&audma0 0x7d>, <&audma0 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
};
next prev parent reply other threads:[~2016-02-09 21:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 21:52 [PATCH v2 0/5] Add R8A7794 sound DT support Sergei Shtylyov
2016-02-09 21:53 ` [PATCH v2 1/5] ARM: dts: r8a7794: add audio clocks Sergei Shtylyov
2016-02-09 21:54 ` [PATCH v2 2/5] ARM: dts: r8a7794: add MSTP5 clocks Sergei Shtylyov
2016-02-09 21:55 ` [PATCH v2 3/5] ARM: dts: r8a7794: add MSTP10 clocks Sergei Shtylyov
2016-02-09 21:56 ` [PATCH v2 4/5] ARM: dts: r8a7794: add Audio-DMAC support Sergei Shtylyov
2016-02-09 21:58 ` Sergei Shtylyov [this message]
2016-02-10 0:41 ` [PATCH v2 5/5] ARM: dts: r8a7794: add sound support Kuninori Morimoto
2016-02-10 17:14 ` Simon Horman
2016-02-12 16:47 ` Sergei Shtylyov
2016-02-12 18:43 ` Simon Horman
2016-02-12 19:08 ` Sergei Shtylyov
2016-02-12 19:33 ` Simon Horman
2016-02-12 19:57 ` Sergei Shtylyov
2016-02-17 5:38 ` Simon Horman
2016-02-17 19:07 ` Sergei Shtylyov
2016-02-17 23:48 ` Simon Horman
2016-02-18 19:31 ` Sergei Shtylyov
2016-02-10 18:09 ` Sergei Shtylyov
2016-02-10 3:12 ` Kuninori Morimoto
2016-02-10 18:10 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2543047.yYrDdYb9v5@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox