[PATCH v3 0/9] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework

[PATCH v3 0/9] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework

[Heiko Stübner]

It is meant to go on top of for_3.16/exynos5260 in tfiga/samsung-clk git
which introduces an API change for the samsung ccf.

The separate patch
"ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion"
should still go on top of this series.

changes since v2.1:
- adapt to changed samsung clock api in conjunction with
  samsung_clk_provider struct
- fix type in Kconfig found by Paul Bolle (S3C24XX_COMMON_DCLK)
- fix type in dt-binding wrongly referencing clocks/samsung,s3c2410-clock.h
changes since v2:
- adapt to 3.15 changes
- use the mpll clk already aquired by the cpufreq base
changes since v1:
- add already received Acks and Reviews
- remove patches that were already part of the s3c2412 submission
- implement suggestions from Tomasz Figa:
- in cpufreq-utils only request mpll clock the first time
- in dclk driver
  - use variant list to describe SoC differences
  - do not provide a dt binding at this time, as the dclk
    parts should probably be part of the pinctrl driver
    In any case this can be solved when the first dt platform needs
    support for the external clock outputs
- in clk-s3c2410
  - fix sentinels
  - rename dt-bindings header
  - don't export XTI clock id

Heiko Stuebner (9):
  ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when
    using ccf
  clk: samsung: add clock driver for external clock outputs
  ARM: S3C24XX: enable usage of common dclk if common clock framework is
    enabled
  dt-bindings: add documentation for s3c2410 clock controller
  clk: samsung: add clock controller driver for s3c2410, s3c2440 and
    s3c2442
  ARM: S3C24XX: add platform code for conversion to the common clock
    framework
  ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework
  ARM: S3C24XX: convert s3c2410 to common clock framework
  ARM: S3C24XX: remove legacy clock code

 .../bindings/clock/samsung,s3c2410-clock.txt       |  50 +++
 arch/arm/mach-s3c24xx/Kconfig                      |  50 ++-
 arch/arm/mach-s3c24xx/Makefile                     |   6 +-
 arch/arm/mach-s3c24xx/clock-dclk.c                 | 195 ---------
 arch/arm/mach-s3c24xx/clock-s3c2410.c              | 284 ------------
 arch/arm/mach-s3c24xx/clock-s3c2440.c              | 217 ----------
 arch/arm/mach-s3c24xx/clock-s3c244x.c              | 141 ------
 arch/arm/mach-s3c24xx/common.c                     |  45 +-
 arch/arm/mach-s3c24xx/common.h                     |  11 +-
 arch/arm/mach-s3c24xx/cpufreq-utils.c              |   8 +
 arch/arm/mach-s3c24xx/include/mach/regs-clock.h    |  18 -
 arch/arm/mach-s3c24xx/include/mach/regs-gpio.h     |   3 -
 arch/arm/mach-s3c24xx/mach-amlm5900.c              |   9 +-
 arch/arm/mach-s3c24xx/mach-anubis.c                |  15 +-
 arch/arm/mach-s3c24xx/mach-at2440evb.c             |  10 +-
 arch/arm/mach-s3c24xx/mach-bast.c                  |  15 +-
 arch/arm/mach-s3c24xx/mach-gta02.c                 |   8 +-
 arch/arm/mach-s3c24xx/mach-h1940.c                 |  10 +-
 arch/arm/mach-s3c24xx/mach-mini2440.c              |  10 +-
 arch/arm/mach-s3c24xx/mach-n30.c                   |  12 +-
 arch/arm/mach-s3c24xx/mach-nexcoder.c              |  10 +-
 arch/arm/mach-s3c24xx/mach-osiris.c                |  15 +-
 arch/arm/mach-s3c24xx/mach-otom.c                  |  10 +-
 arch/arm/mach-s3c24xx/mach-qt2410.c                |   9 +-
 arch/arm/mach-s3c24xx/mach-rx1950.c                |  15 +-
 arch/arm/mach-s3c24xx/mach-rx3715.c                |  10 +-
 arch/arm/mach-s3c24xx/mach-smdk2410.c              |   9 +-
 arch/arm/mach-s3c24xx/mach-smdk2440.c              |  10 +-
 arch/arm/mach-s3c24xx/mach-tct_hammer.c            |   9 +-
 arch/arm/mach-s3c24xx/mach-vr1000.c                |  15 +-
 arch/arm/mach-s3c24xx/pm.c                         |  12 -
 arch/arm/mach-s3c24xx/s3c2410.c                    |  56 ---
 arch/arm/mach-s3c24xx/s3c2442.c                    | 111 -----
 arch/arm/mach-s3c24xx/s3c244x.c                    |  59 +--
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h |   1 +
 drivers/clk/samsung/Makefile                       |   2 +
 drivers/clk/samsung/clk-s3c2410-dclk.c             | 440 +++++++++++++++++++
 drivers/clk/samsung/clk-s3c2410.c                  | 482 +++++++++++++++++++++
 drivers/cpufreq/s3c24xx-cpufreq.c                  |   1 +
 include/dt-bindings/clock/s3c2410.h                |  62 +++
 40 files changed, 1277 insertions(+), 1178 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
 delete mode 100644 arch/arm/mach-s3c24xx/clock-dclk.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2410.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2440.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c244x.c
 create mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c
 create mode 100644 drivers/clk/samsung/clk-s3c2410.c
 create mode 100644 include/dt-bindings/clock/s3c2410.h

-- 
1.9.0

[PATCH v3 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf

[Heiko Stübner]

The s3c24xx cpufreq driver needs to change the mpll speed and was doing
this by writing raw values from a translation table into the MPLLCON
register.

Change this to use a regular clk_set_rate call when using the common
clock framework and only write the raw value in the samsung_clock case.

The s3c cpufreq driver does already aquire the mpll, so simply add a reference
to struct s3c_cpufreq_config to let set_fvco access it.

While struct clk is opaque the differenciation between samsung clock and
common clock is kept, as the samsung-clock mpll clk does not implement a
real set_rate.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-s3c24xx/cpufreq-utils.c              | 8 ++++++++
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 1 +
 drivers/cpufreq/s3c24xx-cpufreq.c                  | 1 +
 3 files changed, 10 insertions(+)

diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
index 2a0aa56..c1b7508 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -60,5 +61,12 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
  */
 void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
 {
+#ifdef CONFIG_SAMSUNG_CLOCK
 	__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
+#endif
+
+#ifdef CONFIG_COMMON_CLK
+	if (!IS_ERR(cfg->mpll))
+		clk_set_rate(cfg->mpll, cfg->pll.frequency);
+#endif
 }
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 7231c8e..72d4178 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -119,6 +119,7 @@ struct s3c_plltab {
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_freq		max;
+	struct clk		*mpll;
 	struct cpufreq_frequency_table pll;
 	struct s3c_clkdivs	divs;
 	struct s3c_cpufreq_info *info;	/* for core, not drivers */
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index be1b2b5..227ebf7 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 
 static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
 {
+	cfg->mpll = _clk_mpll;
 	(cfg->info->set_fvco)(cfg);
 }
 
-- 
1.9.0

[PATCH v3 2/9] clk: samsung: add clock driver for external clock outputs

[Heiko Stübner]

This adds a driver for controlling the external clock outputs of
s3c24xx architectures including the dclk muxes and dividers.

The driver at the moment only supports the legacy non-dt boards using these
clock outputs. The clock-output control itself is part of the system-controller
mainly controlled by the pinctrl drivers. So it should most likely be
integrated there for dt platforms.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
---
 drivers/clk/samsung/Makefile           |   1 +
 drivers/clk/samsung/clk-s3c2410-dclk.c | 440 +++++++++++++++++++++++++++++++++
 2 files changed, 441 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 56e7d38..28ba4eb 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SOC_EXYNOS5260)	+= clk-exynos5260.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c
new file mode 100644
index 0000000..8d8dff0
--- /dev/null
+++ b/drivers/clk/samsung/clk-s3c2410-dclk.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for s3c24xx external clock output.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include "clk.h"
+
+/* legacy access to misccr, until dt conversion is finished */
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#define MUX_DCLK0	0
+#define MUX_DCLK1	1
+#define DIV_DCLK0	2
+#define DIV_DCLK1	3
+#define GATE_DCLK0	4
+#define GATE_DCLK1	5
+#define MUX_CLKOUT0	6
+#define MUX_CLKOUT1	7
+#define DCLK_MAX_CLKS	(MUX_CLKOUT1 + 1)
+
+enum supported_socs {
+	S3C2410,
+	S3C2412,
+	S3C2440,
+	S3C2443,
+};
+
+struct s3c24xx_dclk_drv_data {
+	const char **clkout0_parent_names;
+	int clkout0_num_parents;
+	const char **clkout1_parent_names;
+	int clkout1_num_parents;
+	const char **mux_parent_names;
+	int mux_num_parents;
+};
+
+/*
+ * Clock for output-parent selection in misccr
+ */
+
+struct s3c24xx_clkout {
+	struct clk_hw		hw;
+	u32			mask;
+	u8			shift;
+};
+
+#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
+
+static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
+{
+	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+	int num_parents = __clk_get_num_parents(hw->clk);
+	u32 val;
+
+	val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+	val >>= clkout->shift;
+	val &= clkout->mask;
+
+	if (val >= num_parents)
+		return -EINVAL;
+
+	return val;
+}
+
+static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+	int ret = 0;
+
+	s3c2410_modify_misccr((clkout->mask << clkout->shift),
+			      (index << clkout->shift));
+
+	return ret;
+}
+
+const struct clk_ops s3c24xx_clkout_ops = {
+	.get_parent = s3c24xx_clkout_get_parent,
+	.set_parent = s3c24xx_clkout_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+struct clk *s3c24xx_register_clkout(struct device *dev, const char *name,
+		const char **parent_names, u8 num_parents,
+		u8 shift, u32 mask)
+{
+	struct s3c24xx_clkout *clkout;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the clkout */
+	clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
+	if (!clkout)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &s3c24xx_clkout_ops;
+	init.flags = CLK_IS_BASIC;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	clkout->shift = shift;
+	clkout->mask = mask;
+	clkout->hw.init = &init;
+
+	clk = clk_register(dev, &clkout->hw);
+
+	return clk;
+}
+
+/*
+ * dclk and clkout init
+ */
+
+struct s3c24xx_dclk {
+	struct device *dev;
+	void __iomem *base;
+	struct clk_onecell_data clk_data;
+	struct notifier_block dclk0_div_change_nb;
+	struct notifier_block dclk1_div_change_nb;
+	spinlock_t dclk_lock;
+	unsigned long reg_save;
+};
+
+#define to_s3c24xx_dclk0(x) \
+		container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb)
+
+#define to_s3c24xx_dclk1(x) \
+		container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb)
+
+PNAME(dclk_s3c2410_p) = { "pclk", "uclk" };
+PNAME(clkout0_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk1" };
+
+PNAME(clkout0_s3c2412_p) = { "mpll", "upll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk0" };
+PNAME(clkout1_s3c2412_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk1" };
+
+PNAME(clkout0_s3c2440_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2440_p) = { "mpll", "upll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk1" };
+
+PNAME(dclk_s3c2443_p) = { "pclk", "epll" };
+PNAME(clkout0_s3c2443_p) = { "xti", "epll", "armclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2443_p) = { "dummy", "epll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk1" };
+
+#define DCLKCON_DCLK_DIV_MASK		0xf
+#define DCLKCON_DCLK0_DIV_SHIFT		4
+#define DCLKCON_DCLK0_CMP_SHIFT		8
+#define DCLKCON_DCLK1_DIV_SHIFT		20
+#define DCLKCON_DCLK1_CMP_SHIFT		24
+
+static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk,
+				    int div_shift, int cmp_shift)
+{
+	unsigned long flags = 0;
+	u32 dclk_con, div, cmp;
+
+	spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags);
+
+	dclk_con = readl_relaxed(s3c24xx_dclk->base);
+
+	div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1;
+	cmp = ((div + 1) / 2) - 1;
+
+	dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift);
+	dclk_con |= (cmp << cmp_shift);
+
+	writel_relaxed(dclk_con, s3c24xx_dclk->base);
+
+	spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags);
+}
+
+static int s3c24xx_dclk0_div_notify(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb);
+
+	if (event == POST_RATE_CHANGE) {
+		s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+			DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int s3c24xx_dclk1_div_notify(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb);
+
+	if (event == POST_RATE_CHANGE) {
+		s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+			DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT);
+	}
+
+	return NOTIFY_DONE;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_dclk_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+	s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base);
+	return 0;
+}
+
+static int s3c24xx_dclk_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+	writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops,
+			 s3c24xx_dclk_suspend, s3c24xx_dclk_resume);
+
+static int s3c24xx_dclk_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk;
+	struct resource *mem;
+	struct clk **clk_table;
+	struct s3c24xx_dclk_drv_data *dclk_variant;
+	int ret, i;
+
+	s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk),
+				    GFP_KERNEL);
+	if (!s3c24xx_dclk)
+		return -ENOMEM;
+
+	s3c24xx_dclk->dev = &pdev->dev;
+	platform_set_drvdata(pdev, s3c24xx_dclk);
+	spin_lock_init(&s3c24xx_dclk->dclk_lock);
+
+	clk_table = devm_kzalloc(&pdev->dev,
+				 sizeof(struct clk *) * DCLK_MAX_CLKS,
+				 GFP_KERNEL);
+	if (!clk_table)
+		return -ENOMEM;
+
+	s3c24xx_dclk->clk_data.clks = clk_table;
+	s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(s3c24xx_dclk->base))
+		return PTR_ERR(s3c24xx_dclk->base);
+
+	dclk_variant = (struct s3c24xx_dclk_drv_data *)
+				platform_get_device_id(pdev)->driver_data;
+
+
+	clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0",
+				dclk_variant->mux_parent_names,
+				dclk_variant->mux_num_parents, 0,
+				s3c24xx_dclk->base, 1, 1, 0,
+				&s3c24xx_dclk->dclk_lock);
+	clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1",
+				dclk_variant->mux_parent_names,
+				dclk_variant->mux_num_parents, 0,
+				s3c24xx_dclk->base, 17, 1, 0,
+				&s3c24xx_dclk->dclk_lock);
+
+	clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0",
+				"mux_dclk0", 0, s3c24xx_dclk->base,
+				4, 4, 0, &s3c24xx_dclk->dclk_lock);
+	clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1",
+				"mux_dclk1", 0, s3c24xx_dclk->base,
+				20, 4, 0, &s3c24xx_dclk->dclk_lock);
+
+	clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0",
+				"div_dclk0", CLK_SET_RATE_PARENT,
+				s3c24xx_dclk->base, 0, 0,
+				&s3c24xx_dclk->dclk_lock);
+	clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1",
+				"div_dclk1", CLK_SET_RATE_PARENT,
+				s3c24xx_dclk->base, 16, 0,
+				&s3c24xx_dclk->dclk_lock);
+
+	clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev,
+				"clkout0", dclk_variant->clkout0_parent_names,
+				dclk_variant->clkout0_num_parents, 4, 7);
+	clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev,
+				"clkout1", dclk_variant->clkout1_parent_names,
+				dclk_variant->clkout1_num_parents, 8, 7);
+
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		if (IS_ERR(clk_table[i])) {
+			dev_err(&pdev->dev, "clock %d failed to register\n", i);
+			ret = PTR_ERR(clk_table[i]);
+			goto err_clk_register;
+		}
+
+	ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_CLKOUT0],
+					  "clkout0", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_CLKOUT1],
+					  "clkout1", NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register aliases, %d\n", ret);
+		goto err_clk_register;
+	}
+
+	s3c24xx_dclk->dclk0_div_change_nb.notifier_call =
+						s3c24xx_dclk0_div_notify;
+
+	s3c24xx_dclk->dclk1_div_change_nb.notifier_call =
+						s3c24xx_dclk1_div_notify;
+
+	ret = clk_notifier_register(clk_table[DIV_DCLK0],
+				    &s3c24xx_dclk->dclk0_div_change_nb);
+	if (ret)
+		goto err_clk_register;
+
+	ret = clk_notifier_register(clk_table[DIV_DCLK1],
+				    &s3c24xx_dclk->dclk1_div_change_nb);
+	if (ret)
+		goto err_dclk_notify;
+
+	return 0;
+
+err_dclk_notify:
+	clk_notifier_unregister(clk_table[DIV_DCLK0],
+				&s3c24xx_dclk->dclk0_div_change_nb);
+err_clk_register:
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		if (clk_table[i] && !IS_ERR(clk_table[i]))
+			clk_unregister(clk_table[i]);
+
+	return ret;
+}
+
+static int s3c24xx_dclk_remove(struct platform_device *pdev)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+	struct clk **clk_table = s3c24xx_dclk->clk_data.clks;
+	int i;
+
+	clk_notifier_unregister(clk_table[DIV_DCLK1],
+				&s3c24xx_dclk->dclk1_div_change_nb);
+	clk_notifier_unregister(clk_table[DIV_DCLK0],
+				&s3c24xx_dclk->dclk0_div_change_nb);
+
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		clk_unregister(clk_table[i]);
+
+	return 0;
+}
+
+static struct s3c24xx_dclk_drv_data dclk_variants[] = {
+	[S3C2410] = {
+		.clkout0_parent_names = clkout0_s3c2410_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p),
+		.clkout1_parent_names = clkout1_s3c2410_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2412] = {
+		.clkout0_parent_names = clkout0_s3c2412_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p),
+		.clkout1_parent_names = clkout1_s3c2412_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2440] = {
+		.clkout0_parent_names = clkout0_s3c2440_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p),
+		.clkout1_parent_names = clkout1_s3c2440_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2443] = {
+		.clkout0_parent_names = clkout0_s3c2443_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p),
+		.clkout1_parent_names = clkout1_s3c2443_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p),
+		.mux_parent_names = dclk_s3c2443_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p),
+	},
+};
+
+static struct platform_device_id s3c24xx_dclk_driver_ids[] = {
+	{
+		.name		= "s3c2410-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2410],
+	}, {
+		.name		= "s3c2412-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2412],
+	}, {
+		.name		= "s3c2440-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2440],
+	}, {
+		.name		= "s3c2443-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2443],
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids);
+
+static struct platform_driver s3c24xx_dclk_driver = {
+	.driver = {
+		.name		= "s3c24xx-dclk",
+		.owner		= THIS_MODULE,
+		.pm		= &s3c24xx_dclk_pm_ops,
+	},
+	.probe = s3c24xx_dclk_probe,
+	.remove = s3c24xx_dclk_remove,
+	.id_table = s3c24xx_dclk_driver_ids,
+};
+module_platform_driver(s3c24xx_dclk_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs");
-- 
1.9.0

[PATCH v3 3/9] ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled

[Heiko Stübner]

Add platform device and select the correct implementation automatically
depending on wether the old samsung_clock or the common clock framework
is enabled.

This is only done for machines already using the old dclk implementation,
as everybody else should move to use dt anyway.

The machine-specific settings for the external clocks will have to be set
by somebody with knowledge about the specific hardware.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-s3c24xx/Kconfig       | 22 +++++++++++++++++-----
 arch/arm/mach-s3c24xx/common.c      | 14 ++++++++++++++
 arch/arm/mach-s3c24xx/common.h      |  2 ++
 arch/arm/mach-s3c24xx/mach-anubis.c |  5 +++++
 arch/arm/mach-s3c24xx/mach-bast.c   |  5 +++++
 arch/arm/mach-s3c24xx/mach-osiris.c |  5 +++++
 arch/arm/mach-s3c24xx/mach-rx1950.c |  5 +++++
 arch/arm/mach-s3c24xx/mach-vr1000.c |  5 +++++
 arch/arm/mach-s3c24xx/s3c244x.c     |  2 ++
 9 files changed, 60 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index fbafb9a..b4c055b 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -18,6 +18,13 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
+config S3C2410_COMMON_DCLK
+	bool
+	select REGMAP_MMIO
+	help
+	  Temporary symbol to build the dclk driver based on the common clock
+	  framework.
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -264,7 +271,8 @@ config ARCH_BAST
 	select ISA
 	select MACH_BAST_IDE
 	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_DCLK
+	select S3C24XX_DCLK if SAMSUNG_CLOCK
+	select S3C2410_COMMON_DCLK if COMMON_CLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -345,7 +353,8 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select MACH_BAST_IDE
-	select S3C24XX_DCLK
+	select S3C24XX_DCLK if SAMSUNG_CLOCK
+	select S3C2410_COMMON_DCLK if COMMON_CLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -530,7 +539,8 @@ config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select HAVE_PATA_PLATFORM
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
+	select S3C24XX_DCLK if SAMSUNG_CLOCK
+	select S3C2410_COMMON_DCLK if COMMON_CLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -570,7 +580,8 @@ config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
+	select S3C24XX_DCLK if SAMSUNG_CLOCK
+	select S3C2410_COMMON_DCLK if COMMON_CLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
@@ -641,7 +652,8 @@ config MACH_RX1950
 	select PM_H1940 if PM
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_DCLK
+	select S3C24XX_DCLK if SAMSUNG_CLOCK
+	select S3C2410_COMMON_DCLK if COMMON_CLK
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index ad5b76b..7cc6d94 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -553,3 +553,17 @@ void __init s3c2443_init_clocks(int xtal)
 	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
 }
 #endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+	defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+	.name		= "s3c2410-dclk",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
+	.resource	= s3c2410_dclk_resource,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 3fade6d..50504c7 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -114,6 +114,8 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+extern struct platform_device s3c2410_device_dclk;
+
 #ifdef CONFIG_S3C2412_COMMON_CLK
 void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
 				unsigned long ext_f, void __iomem *reg_base);
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 81a270a..f81944f 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -352,6 +352,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
@@ -364,6 +365,7 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 static struct clk *anubis_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
@@ -371,6 +373,7 @@ static struct clk *anubis_clocks[] __initdata = {
 	&s3c24xx_clkout1,
 	&s3c24xx_uclk,
 };
+#endif
 
 /* I2C devices. */
 
@@ -394,6 +397,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 
 static void __init anubis_map_io(void)
 {
+#ifdef CONFIG_SAMSUNG_CLOCK
 	/* initialise the clocks */
 
 	s3c24xx_dclk0.parent = &clk_upll;
@@ -408,6 +412,7 @@ static void __init anubis_map_io(void)
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
 	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
+#endif
 
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index e371ff5..dcdc4a5 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -523,6 +523,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -537,6 +538,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
+#ifdef CONFIG_SAMSUNG_CLK
 static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
@@ -544,6 +546,7 @@ static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_clkout1,
 	&s3c24xx_uclk,
 };
+#endif
 
 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.refresh	= 7800, /* 7.8usec */
@@ -558,6 +561,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 
 static void __init bast_map_io(void)
 {
+#ifdef CONFIG_SAMSUNG_CLOCK
 	/* initialise the clocks */
 
 	s3c24xx_dclk0.parent = &clk_upll;
@@ -572,6 +576,7 @@ static void __init bast_map_io(void)
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
+#endif
 
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index a4ae4bb..487be02 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -344,12 +344,14 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
 };
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
@@ -357,6 +359,7 @@ static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_clkout1,
 	&s3c24xx_uclk,
 };
+#endif
 
 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 	.refresh	= 7800, /* refresh period is 7.8usec */
@@ -368,6 +371,7 @@ static void __init osiris_map_io(void)
 {
 	unsigned long flags;
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 	/* initialise the clocks */
 
 	s3c24xx_dclk0.parent = &clk_upll;
@@ -382,6 +386,7 @@ static void __init osiris_map_io(void)
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
 	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
+#endif
 
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index afb784e..219454c 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -710,6 +710,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
 };
 
 static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -728,17 +729,21 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&rx1950_leds,
 };
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 static struct clk *rx1950_clocks[] __initdata = {
 	&s3c24xx_clkout0,
 	&s3c24xx_clkout1,
 };
+#endif
 
 static void __init rx1950_map_io(void)
 {
+#ifdef CONFIG_SAMSUNG_CLOCK
 	s3c24xx_clkout0.parent  = &clk_h;
 	s3c24xx_clkout1.parent  = &clk_f;
 
 	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+#endif
 
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
 	s3c24xx_init_clocks(16934000);
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 1cc5b1b..bedaeef 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -286,6 +286,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -299,6 +300,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 static struct clk *vr1000_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
@@ -306,6 +308,7 @@ static struct clk *vr1000_clocks[] __initdata = {
 	&s3c24xx_clkout1,
 	&s3c24xx_uclk,
 };
+#endif
 
 static void vr1000_power_off(void)
 {
@@ -314,6 +317,7 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
+#if CONFIG_SAMSUNG_CLOCK
 	/* initialise clock sources */
 
 	s3c24xx_dclk0.parent = &clk_upll;
@@ -328,6 +332,7 @@ static void __init vr1000_map_io(void)
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
 	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
+#endif
 
 	pm_power_off = vr1000_power_off;
 
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index fe30ebb2..76b691b 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -46,6 +46,7 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "common.h"
 #include "regs-dsc.h"
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
@@ -74,6 +75,7 @@ void __init s3c244x_map_io(void)
 	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
 void __init_or_cpufreq s3c244x_setup_clocks(void)
-- 
1.9.0

[PATCH v3 4/9] dt-bindings: add documentation for s3c2410 clock controller

[Heiko Stübner]

Describe the clock controller of s3c2410, s3c2440 and s3c2442.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <t.figa@samsung.com>
---
 .../bindings/clock/samsung,s3c2410-clock.txt       | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
new file mode 100644
index 0000000..822505e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
@@ -0,0 +1,50 @@
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2410.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+	clocks: clock-controller at 4c000000 {
+		compatible = "samsung,s3c2410-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial at 50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+		status = "disabled";
+	};
-- 
1.9.0

[PATCH v3 5/9] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442

[Heiko Stübner]

This driver can handle the clock controllers of the socs mentioned above,
as they share a common clock tree with only small differences.

The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure.

As pll-rate-tables only the 12mhz variants are currently included.
The original code was wrongly checking for 169mhz xti values [a 0 to much
at the end], so the original 16mhz pll table would have never been
included and its values are so obscure that I have no possibility to
at least check their sane-ness. When using the formula from the manual
the resulting frequency is near the table value but still slightly off.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
---
 drivers/clk/samsung/Makefile        |   1 +
 drivers/clk/samsung/clk-s3c2410.c   | 482 ++++++++++++++++++++++++++++++++++++
 include/dt-bindings/clock/s3c2410.h |  62 +++++
 3 files changed, 545 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-s3c2410.c
 create mode 100644 include/dt-bindings/clock/s3c2410.h

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 28ba4eb..9160494 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SOC_EXYNOS5260)	+= clk-exynos5260.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
 obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
new file mode 100644
index 0000000..ba07168
--- /dev/null
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -0,0 +1,482 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2410 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2410.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME	0x00
+#define MPLLCON		0x04
+#define UPLLCON		0x08
+#define CLKCON		0x0c
+#define CLKSLOW		0x10
+#define CLKDIVN		0x14
+#define CAMDIVN		0x18
+
+/* the soc types */
+enum supported_socs {
+	S3C2410,
+	S3C2440,
+	S3C2442,
+};
+
+/* list of PLLs to be registered */
+enum s3c2410_plls {
+	mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2410_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2410_clk_regs[] __initdata = {
+	LOCKTIME,
+	MPLLCON,
+	UPLLCON,
+	CLKCON,
+	CLKSLOW,
+	CLKDIVN,
+	CAMDIVN,
+};
+
+static int s3c2410_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+
+	return 0;
+}
+
+static void s3c2410_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+}
+
+static struct syscore_ops s3c2410_clk_syscore_ops = {
+	.suspend = s3c2410_clk_suspend,
+	.resume = s3c2410_clk_resume,
+};
+
+static void s3c2410_clk_sleep_init(void)
+{
+	s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs,
+						ARRAY_SIZE(s3c2410_clk_regs));
+	if (!s3c2410_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2410_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2410_clk_sleep_init(void) {}
+#endif
+
+PNAME(fclk_p) = { "mpll", "div_slow" };
+
+struct samsung_mux_clock s3c2410_common_muxes[] __initdata = {
+	MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1),
+};
+
+static struct clk_div_table divslow_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2410_common_dividers[] __initdata = {
+	DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1),
+};
+
+struct samsung_gate_clock s3c2410_common_gates[] __initdata = {
+	GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0),
+	GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0),
+	GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+	GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+};
+
+/* should be added _after_ the soc-specific clocks are created */
+struct samsung_clock_alias s3c2410_common_aliases[] __initdata = {
+	ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(UCLK, NULL, "usb-bus-host"),
+	ALIAS(UCLK, NULL, "usb-bus-gadget"),
+	ALIAS(ARMCLK, NULL, "armclk"),
+	ALIAS(UCLK, NULL, "uclk"),
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(MPLL, NULL, "mpll"),
+	ALIAS(FCLK, NULL, "fclk"),
+};
+
+/* S3C2410 specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	/* 2410A extras */
+	PLL_35XX_RATE(270000000, 127, 1, 1),
+	PLL_35XX_RATE(268000000, 126, 1, 1),
+	PLL_35XX_RATE(266000000, 125, 1, 1),
+	PLL_35XX_RATE(226000000, 105, 1, 1),
+	PLL_35XX_RATE(210000000, 132, 2, 1),
+	/* 2410 common */
+	PLL_35XX_RATE(203000000, 161, 3, 1),
+	PLL_35XX_RATE(192000000, 88, 1, 1),
+	PLL_35XX_RATE(186000000, 85, 1, 1),
+	PLL_35XX_RATE(180000000, 82, 1, 1),
+	PLL_35XX_RATE(170000000, 77, 1, 1),
+	PLL_35XX_RATE(158000000, 71, 1, 1),
+	PLL_35XX_RATE(152000000, 68, 1, 1),
+	PLL_35XX_RATE(147000000, 90, 2, 1),
+	PLL_35XX_RATE(135000000, 82, 2, 1),
+	PLL_35XX_RATE(124000000, 116, 1, 2),
+	PLL_35XX_RATE(118000000, 150, 2, 2),
+	PLL_35XX_RATE(113000000, 105, 1, 2),
+	PLL_35XX_RATE(101000000, 127, 2, 2),
+	PLL_35XX_RATE(90000000, 112, 2, 2),
+	PLL_35XX_RATE(85000000, 105, 2, 2),
+	PLL_35XX_RATE(79000000, 71, 1, 2),
+	PLL_35XX_RATE(68000000, 82, 2, 2),
+	PLL_35XX_RATE(56000000, 142, 2, 3),
+	PLL_35XX_RATE(48000000, 120, 2, 3),
+	PLL_35XX_RATE(51000000, 161, 3, 3),
+	PLL_35XX_RATE(45000000, 82, 1, 3),
+	PLL_35XX_RATE(34000000, 82, 2, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c2410_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_div_clock s3c2410_dividers[] __initdata = {
+	DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1),
+};
+
+struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = {
+	/*
+	 * armclk is directly supplied by the fclk, without
+	 * switching possibility like on the s3c244x below.
+	 */
+	FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0),
+
+	/* uclk is fed from the unmodified upll */
+	FFACTOR(UCLK, "uclk", "upll", 1, 1, 0),
+};
+
+struct samsung_clock_alias s3c2410_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"),
+	ALIAS(UCLK, NULL, "clk_uart_baud1"),
+};
+
+/* S3C244x specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	PLL_35XX_RATE(400000000, 0x5c, 1, 1),
+	PLL_35XX_RATE(390000000, 0x7a, 2, 1),
+	PLL_35XX_RATE(380000000, 0x57, 1, 1),
+	PLL_35XX_RATE(370000000, 0xb1, 4, 1),
+	PLL_35XX_RATE(360000000, 0x70, 2, 1),
+	PLL_35XX_RATE(350000000, 0xa7, 4, 1),
+	PLL_35XX_RATE(340000000, 0x4d, 1, 1),
+	PLL_35XX_RATE(330000000, 0x66, 2, 1),
+	PLL_35XX_RATE(320000000, 0x98, 4, 1),
+	PLL_35XX_RATE(310000000, 0x93, 4, 1),
+	PLL_35XX_RATE(300000000, 0x75, 3, 1),
+	PLL_35XX_RATE(240000000, 0x70, 1, 2),
+	PLL_35XX_RATE(230000000, 0x6b, 1, 2),
+	PLL_35XX_RATE(220000000, 0x66, 1, 2),
+	PLL_35XX_RATE(210000000, 0x84, 2, 2),
+	PLL_35XX_RATE(200000000, 0x5c, 1, 2),
+	PLL_35XX_RATE(190000000, 0x57, 1, 2),
+	PLL_35XX_RATE(180000000, 0x70, 2, 2),
+	PLL_35XX_RATE(170000000, 0x4d, 1, 2),
+	PLL_35XX_RATE(160000000, 0x98, 4, 2),
+	PLL_35XX_RATE(150000000, 0x75, 3, 2),
+	PLL_35XX_RATE(120000000, 0x70, 1, 3),
+	PLL_35XX_RATE(110000000, 0x66, 1, 3),
+	PLL_35XX_RATE(100000000, 0x5c, 1, 3),
+	PLL_35XX_RATE(90000000, 0x70, 2, 3),
+	PLL_35XX_RATE(80000000, 0x98, 4, 3),
+	PLL_35XX_RATE(75000000, 0x75, 3, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c244x_common_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" };
+PNAME(armclk_p) = { "fclk", "hclk" };
+
+struct samsung_mux_clock s3c244x_common_muxes[] __initdata = {
+	MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2),
+	MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1),
+};
+
+struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = {
+	FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0),
+	FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+static struct clk_div_table div_hclk_4_d[] = {
+	{ .val = 0, .div = 4 },
+	{ .val = 1, .div = 8 },
+	{ /* sentinel */ },
+};
+
+static struct clk_div_table div_hclk_3_d[] = {
+	{ .val = 0, .div = 3 },
+	{ .val = 1, .div = 6 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c244x_common_dividers[] __initdata = {
+	DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1),
+	DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1),
+	DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d),
+	DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d),
+	DIV(0, "div_cam", "upll", CAMDIVN, 0, 3),
+};
+
+struct samsung_gate_clock s3c244x_common_gates[] __initdata = {
+	GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c244x_common_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(HCLK_CAM, NULL, "camif"),
+	ALIAS(CAMIF, NULL, "camif-upll"),
+};
+
+/* S3C2440 specific clocks */
+
+PNAME(s3c2440_camif_p) = { "upll", "ff_cam" };
+
+struct samsung_mux_clock s3c2440_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1),
+};
+
+struct samsung_gate_clock s3c2440_gates[] __initdata = {
+	GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0),
+};
+
+/* S3C2442 specific clocks */
+
+struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = {
+	FFACTOR(0, "upll_3", "upll", 1, 3, 0),
+};
+
+PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" };
+
+struct samsung_mux_clock s3c2442_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI	1
+struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
+	FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2410_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx,
+		unsigned long xti_f)
+{
+	struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+	s3c2410_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks,
+				ARRAY_SIZE(s3c2410_common_frate_clks));
+
+	samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
+
+	if (current_soc == 2410) {
+		if (_get_rate("xti") == 12 * MHZ) {
+			s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
+			s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c2410_plls,
+				ARRAY_SIZE(s3c2410_plls), reg_base);
+
+	} else { /* S3C2440, S3C2442 */
+		if (_get_rate("xti") == 12 * MHZ) {
+			/*
+			 * plls follow different calculation schemes, with the
+			 * upll following the same scheme as the s3c2410 plls
+			 */
+			s3c244x_common_plls[mpll].rate_table =
+							pll_s3c244x_12mhz_tbl;
+			s3c244x_common_plls[upll].rate_table =
+							pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c244x_common_plls,
+				ARRAY_SIZE(s3c244x_common_plls), reg_base);
+	}
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2410_common_muxes,
+			ARRAY_SIZE(s3c2410_common_muxes));
+	samsung_clk_register_div(ctx, s3c2410_common_dividers,
+			ARRAY_SIZE(s3c2410_common_dividers));
+	samsung_clk_register_gate(ctx, s3c2410_common_gates,
+		ARRAY_SIZE(s3c2410_common_gates));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_div(ctx, s3c244x_common_dividers,
+				ARRAY_SIZE(s3c244x_common_dividers));
+		samsung_clk_register_gate(ctx, s3c244x_common_gates,
+				ARRAY_SIZE(s3c244x_common_gates));
+		samsung_clk_register_mux(ctx, s3c244x_common_muxes,
+				ARRAY_SIZE(s3c244x_common_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor,
+				ARRAY_SIZE(s3c244x_common_ffactor));
+	}
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2410:
+		samsung_clk_register_div(ctx, s3c2410_dividers,
+				ARRAY_SIZE(s3c2410_dividers));
+		samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
+				ARRAY_SIZE(s3c2410_ffactor));
+		samsung_clk_register_alias(ctx, s3c2410_aliases,
+			ARRAY_SIZE(s3c2410_common_aliases));
+		break;
+	case S3C2440:
+		samsung_clk_register_mux(ctx, s3c2440_muxes,
+				ARRAY_SIZE(s3c2440_muxes));
+		samsung_clk_register_gate(ctx, s3c2440_gates,
+				ARRAY_SIZE(s3c2440_gates));
+		break;
+	case S3C2442:
+		samsung_clk_register_mux(ctx, s3c2442_muxes,
+				ARRAY_SIZE(s3c2442_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor,
+				ARRAY_SIZE(s3c2442_ffactor));
+		break;
+	}
+
+	/*
+	 * Register common aliases at the end, as some of the aliased clocks
+	 * are SoC specific.
+	 */
+	samsung_clk_register_alias(ctx, s3c2410_common_aliases,
+		ARRAY_SIZE(s3c2410_common_aliases));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_alias(ctx, s3c244x_common_aliases,
+			ARRAY_SIZE(s3c244x_common_aliases));
+	}
+
+	s3c2410_clk_sleep_init();
+}
+
+static void __init s3c2410_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2410, 0);
+}
+CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init);
+
+static void __init s3c2440_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2440, 0);
+}
+CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init);
+
+static void __init s3c2442_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2442, 0);
+}
+CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init);
diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h
new file mode 100644
index 0000000..352a767
--- /dev/null
+++ b/include/dt-bindings/clock/s3c2410.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2410 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL			2
+#define UPLL			3
+#define FCLK			4
+#define HCLK			5
+#define PCLK			6
+#define UCLK			7
+#define ARMCLK			8
+
+/* pclk-gates */
+#define PCLK_UART0		16
+#define PCLK_UART1		17
+#define PCLK_UART2		18
+#define PCLK_I2C		19
+#define PCLK_SDI		20
+#define PCLK_SPI		21
+#define PCLK_ADC		22
+#define PCLK_AC97		23
+#define PCLK_I2S		24
+#define PCLK_PWM		25
+#define PCLK_RTC		26
+#define PCLK_GPIO		27
+
+
+/* hclk-gates */
+#define HCLK_LCD		32
+#define HCLK_USBH		33
+#define HCLK_USBD		34
+#define HCLK_NAND		35
+#define HCLK_CAM		36
+
+
+#define CAMIF			40
+
+
+/* Total number of clocks. */
+#define NR_CLKS			(CAMIF + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */
-- 
1.9.0

[PATCH v3 6/9] ARM: S3C24XX: add platform code for conversion to the common clock framework

[Heiko Stübner]

This adds the necessary init functions to init the clocks from the common
clock framework and necessary CONFIG_SAMSUNG_CLOCK ifdefs around the legacy
clock code.

This also includes empty stubs for the *_setup_clocks functions that are
called from the cpufreq driver on resume.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-s3c24xx/Kconfig   |  5 +++++
 arch/arm/mach-s3c24xx/common.c  | 25 +++++++++++++++++++++++++
 arch/arm/mach-s3c24xx/common.h  |  7 +++++++
 arch/arm/mach-s3c24xx/s3c2410.c |  6 ++++++
 arch/arm/mach-s3c24xx/s3c2442.c |  3 ++-
 arch/arm/mach-s3c24xx/s3c244x.c |  6 ++++++
 6 files changed, 51 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index b4c055b..5c9cffd 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -18,6 +18,11 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
+config S3C2410_COMMON_CLK
+	bool
+	help
+	  Build the s3c2410 clock driver based on the common clock framework.
+
 config S3C2410_COMMON_DCLK
 	bool
 	select REGMAP_MMIO
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 7cc6d94..35cf88e 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -53,6 +53,7 @@
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
 #include <plat/pwm-core.h>
+#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -533,6 +534,14 @@ struct platform_device s3c2443_device_dma = {
 };
 #endif
 
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
 #ifdef CONFIG_CPU_S3C2412
 void __init s3c2412_init_clocks(int xtal)
 {
@@ -547,6 +556,22 @@ void __init s3c2416_init_clocks(int xtal)
 }
 #endif
 
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
 #ifdef CONFIG_CPU_S3C2443
 void __init s3c2443_init_clocks(int xtal)
 {
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 50504c7..2d65541 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -77,6 +77,7 @@ extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
 extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
 extern void s3c2440_init_irq(void);
 #else
 #define s3c2440_init NULL
@@ -86,6 +87,7 @@ extern void s3c2440_init_irq(void);
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
 extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
 extern void s3c2442_init_irq(void);
 #else
 #define s3c2442_init NULL
@@ -116,6 +118,11 @@ extern struct platform_device s3c2443_device_dma;
 
 extern struct platform_device s3c2410_device_dclk;
 
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
 #ifdef CONFIG_S3C2412_COMMON_CLK
 void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
 				unsigned long ext_f, void __iomem *reg_base);
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 04b58cb..5280173 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -83,6 +83,7 @@ void __init s3c2410_map_io(void)
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -142,6 +143,11 @@ void __init s3c2410_init_clocks(int xtal)
 	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
 	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
+#else
+void __init_or_cpufreq s3c2410_setup_clocks(void)
+{
+}
+#endif
 
 struct bus_type s3c2410_subsys = {
 	.name = "s3c2410-core",
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 2c8adc0..564c6503 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -53,6 +53,7 @@
 
 #include "common.h"
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 /* S3C2442 extended clock support */
 
 static unsigned long s3c2442_camif_upll_round(struct clk *clk,
@@ -162,7 +163,7 @@ static __init int s3c2442_clk_init(void)
 }
 
 arch_initcall(s3c2442_clk_init);
-
+#endif
 
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 76b691b..1d665d5 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -78,6 +78,7 @@ void __init s3c244x_map_io(void)
 	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -138,6 +139,11 @@ void __init s3c244x_init_clocks(int xtal)
 	s3c2410_baseclk_add();
 	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
+#else
+void __init_or_cpufreq s3c244x_setup_clocks(void)
+{
+}
+#endif
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */
 
-- 
1.9.0

[PATCH v3 7/9] ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework

[Heiko Stübner]

Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.

Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-s3c24xx/Kconfig          |  8 ++++----
 arch/arm/mach-s3c24xx/Makefile         |  4 ++--
 arch/arm/mach-s3c24xx/common.c         |  4 ----
 arch/arm/mach-s3c24xx/mach-anubis.c    | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-at2440evb.c | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-gta02.c     |  8 ++++++--
 arch/arm/mach-s3c24xx/mach-mini2440.c  | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-nexcoder.c  | 15 ++++++++++++---
 arch/arm/mach-s3c24xx/mach-osiris.c    | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-rx1950.c    | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-rx3715.c    | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-smdk2440.c  | 10 +++++++---
 12 files changed, 73 insertions(+), 36 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5c9cffd..ddd6574 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -73,10 +73,10 @@ config CPU_S3C2416
 
 config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
-	depends on SAMSUNG_CLOCK
+	select COMMON_CLK
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
 	help
@@ -84,10 +84,10 @@ config CPU_S3C2440
 
 config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
-	depends on SAMSUNG_CLOCK
+	select COMMON_CLK
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index f254797..9010eba 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -29,9 +29,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 35cf88e..bda9dd4 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -92,7 +92,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440
@@ -101,7 +100,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440a
@@ -110,7 +108,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
@@ -119,7 +116,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442b
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index f81944f..7a0d83b 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -46,7 +46,6 @@
 
 #include <net/ax88796.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -415,7 +414,6 @@ static void __init anubis_map_io(void)
 #endif
 
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -433,6 +431,12 @@ static void __init anubis_map_io(void)
 	}
 }
 
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -452,6 +456,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= anubis_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index d8f6bb1..9db768f 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -45,7 +45,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 static void __init at2440evb_map_io(void)
 {
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init at2440evb_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= at2440evb_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index dc4db84..fc3a08d 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
 	regulator_has_full_constraints();
 }
 
+static void __init gta02_init_time(void)
+{
+	s3c2442_init_clocks(12000000);
+	samsung_timer_init();
+}
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= gta02_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9e57fd9..5cc40ec 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -54,7 +54,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
 static void __init mini2440_map_io(void)
 {
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init mini2440_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /*
  * mini2440_features string
  *
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= mini2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 3066851..05627c2 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -42,7 +42,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -135,13 +134,23 @@ static void __init nexcoder_sensorboard_init(void)
 static void __init nexcoder_map_io(void)
 {
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init_time(void)
+{
+	/*
+	 * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
+	 * meaning a xti value of 0Hz, so this machine will most likely
+	 * not work out of the box and needs a fixup.
+	 */
+	s3c2440_init_clocks(0);
+	samsung_timer_init();
+}
+
 static void __init nexcoder_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -154,6 +163,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= nexcoder_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 487be02..3bc2c9b 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -40,7 +40,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -389,7 +388,6 @@ static void __init osiris_map_io(void)
 #endif
 
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -413,6 +411,12 @@ static void __init osiris_map_io(void)
 	local_irq_restore(flags);
 }
 
+static void __init osiris_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init osiris_init(void)
 {
 	register_syscore_ops(&osiris_pm_syscore_ops);
@@ -434,6 +438,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= osiris_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 219454c..5f37f52 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -54,7 +54,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -746,7 +745,6 @@ static void __init rx1950_map_io(void)
 #endif
 
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -759,6 +757,12 @@ static void __init rx1950_map_io(void)
 	s3c_pm_init();
 }
 
+static void __init rx1950_init_time(void)
+{
+	s3c2442_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 static void __init rx1950_init_machine(void)
 {
 	int i;
@@ -821,6 +825,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx1950_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index e6535ce..6e749ec 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -46,7 +46,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
 static void __init rx3715_map_io(void)
 {
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init rx3715_init_time(void)
+{
+	s3c2440_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init rx3715_reserve(void)
 {
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx3715_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index d071dcf..5fb89c0 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -38,7 +38,6 @@
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 static void __init smdk2440_map_io(void)
 {
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2440_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c2440_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
-- 
1.9.0

[PATCH v3 8/9] ARM: S3C24XX: convert s3c2410 to common clock framework

[Heiko Stübner]

Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.

As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-s3c24xx/Kconfig           |  4 ++--
 arch/arm/mach-s3c24xx/common.c          |  2 --
 arch/arm/mach-s3c24xx/mach-amlm5900.c   |  9 +++++++--
 arch/arm/mach-s3c24xx/mach-bast.c       | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-h1940.c      | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-n30.c        | 12 ++++++++----
 arch/arm/mach-s3c24xx/mach-nexcoder.c   |  7 +------
 arch/arm/mach-s3c24xx/mach-otom.c       | 10 +++++++---
 arch/arm/mach-s3c24xx/mach-qt2410.c     |  9 +++++++--
 arch/arm/mach-s3c24xx/mach-smdk2410.c   |  9 +++++++--
 arch/arm/mach-s3c24xx/mach-tct_hammer.c |  9 +++++++--
 arch/arm/mach-s3c24xx/mach-vr1000.c     | 10 +++++++---
 12 files changed, 67 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index ddd6574..82602dc 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -37,10 +37,10 @@ comment "S3C24XX SoCs"
 config CPU_S3C2410
 	bool "SAMSUNG S3C2410"
 	default y
-	depends on SAMSUNG_CLOCK
+	select COMMON_CLK
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index bda9dd4..600a1be 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -74,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410_init,
 		.name		= name_s3c2410
@@ -83,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410002,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 8ac9554..5157e25 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 static void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 #ifdef CONFIG_FB_S3C2410
 static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
 	.width		= 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= amlm5900_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index dcdc4a5..ea762f2 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -51,7 +51,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -581,11 +580,16 @@ static void __init bast_map_io(void)
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init bast_init(void)
 {
 	register_syscore_ops(&bast_pm_syscore_ops);
@@ -613,6 +617,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= bast_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index e453acd..fbf5487 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -57,7 +57,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
 	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init h1940_reserve(void)
 {
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= h1940_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 4cccaad..3ac2a54 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -45,7 +45,6 @@
 
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	n30_hwinit();
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 05627c2..c82c281 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -142,12 +142,7 @@ static void __init nexcoder_map_io(void)
 
 static void __init nexcoder_init_time(void)
 {
-	/*
-	 * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
-	 * meaning a xti value of 0Hz, so this machine will most likely
-	 * not work out of the box and needs a fixup.
-	 */
-	s3c2440_init_clocks(0);
+	s3c2440_init_clocks(12000000);
 	samsung_timer_init();
 }
 
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bdb3faa..4583300 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -30,7 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init otom11_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= otom11_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 8c12787..228c909 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
 static void __init qt2410_map_io(void)
 {
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init qt2410_machine_init(void)
 {
 	s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= qt2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index f32924e..419fadd 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2410_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 4108b2f..c616ca2 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 static void __init tct_hammer_map_io(void)
 {
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init tct_hammer_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= tct_hammer_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index bedaeef..5f588bf 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -43,7 +43,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -337,11 +336,16 @@ static void __init vr1000_map_io(void)
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -362,6 +366,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= vr1000_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
-- 
1.9.0

[PATCH v3 9/9] ARM: S3C24XX: remove legacy clock code

[Heiko Stübner]

With the move to the common clock framework completed for s3c2410, s3c2440
and s3c2442, the legacy clock code for these machines can go away too.

This also includes the legacy dclk code, as all legacy users are converted.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-s3c24xx/Kconfig                   |  11 -
 arch/arm/mach-s3c24xx/Makefile                  |   2 -
 arch/arm/mach-s3c24xx/clock-dclk.c              | 195 ----------------
 arch/arm/mach-s3c24xx/clock-s3c2410.c           | 284 ------------------------
 arch/arm/mach-s3c24xx/clock-s3c2440.c           | 217 ------------------
 arch/arm/mach-s3c24xx/clock-s3c244x.c           | 141 ------------
 arch/arm/mach-s3c24xx/common.h                  |   2 -
 arch/arm/mach-s3c24xx/include/mach/regs-clock.h |  18 --
 arch/arm/mach-s3c24xx/include/mach/regs-gpio.h  |   3 -
 arch/arm/mach-s3c24xx/pm.c                      |  12 -
 arch/arm/mach-s3c24xx/s3c2410.c                 |  62 ------
 arch/arm/mach-s3c24xx/s3c2442.c                 | 112 ----------
 arch/arm/mach-s3c24xx/s3c244x.c                 |  63 ------
 13 files changed, 1122 deletions(-)
 delete mode 100644 arch/arm/mach-s3c24xx/clock-dclk.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2410.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2440.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c244x.c

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 82602dc..93dc265 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -110,17 +110,6 @@ config CPU_S3C2443
 
 # common code
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
 config S3C24XX_SMDK
 	bool
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 9010eba..2235d0d 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -44,10 +44,8 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
deleted file mode 100644
index 1edd9b2..0000000
--- a/arch/arm/mach-s3c24xx/clock-dclk.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
deleted file mode 100644
index d1afcf9..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
deleted file mode 100644
index 5527226..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
-		return parent_rate;
-
-	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
-	return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.get_rate	= s3c2440_camif_upll_getrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
-	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
-	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
-	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c
deleted file mode 100644
index 6d9b688..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c244x.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 2d65541..ac3ff12 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -67,10 +67,8 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
 extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
-#define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
 #endif
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
index 3415b60..3db6c10 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
@@ -42,24 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index c2ef016..c6583cf 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -457,9 +457,6 @@
 
 /* miscellaneous control */
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
 
 /* see clock.h for dclk definitions */
 
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 16281bd..3d8cf30 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -80,12 +80,6 @@ static struct sleep_save core_save[] = {
 #endif /* CONFIG_SAMSUNG_CLOCK */
 };
 
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
-};
-#endif
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -143,16 +137,10 @@ void s3c_pm_configure_extint(void)
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-#ifdef CONFIG_SAMSUNG_CLOCK
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-#endif
 }
 
 void s3c_pm_save_core(void)
 {
-#ifdef CONFIG_SAMSUNG_CLOCK
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-#endif
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
 
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 5280173..7eab888 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -83,71 +83,9 @@ void __init s3c2410_map_io(void)
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
 
-#ifdef CONFIG_SAMSUNG_CLOCK
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
-#else
-void __init_or_cpufreq s3c2410_setup_clocks(void)
-{
-}
-#endif
 
 struct bus_type s3c2410_subsys = {
 	.name = "s3c2410-core",
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 564c6503..fb9da2b 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -53,118 +53,6 @@
 
 #include "common.h"
 
-#ifdef CONFIG_SAMSUNG_CLOCK
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-#endif
-
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
 };
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 1d665d5..4a64bcc 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -78,72 +78,9 @@ void __init s3c244x_map_io(void)
 	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
-#ifdef CONFIG_SAMSUNG_CLOCK
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
-#else
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
-}
-#endif
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */
 
-- 
1.9.0