From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: maxime@cerno.tech, linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, wens@csie.org,
Philip Rinn <rinni@inventati.org>
Subject: Re: Re: [linux-sunxi] Re: [PATCH RESEND v3] arm64: dts: allwinner: a64: olinuxino: Enable audio
Date: Sat, 26 Mar 2022 07:45:35 +0100 [thread overview]
Message-ID: <2621573.mvXUDI8C0e@kista> (raw)
In-Reply-To: <YjyVXUUNaZageNwC@inventati.org>
Hi,
Dne četrtek, 24. marec 2022 ob 17:28:50 CET je Philip Rinn napisal(a):
> Hi,
>
> any chance this patch get applied? It seems it will not make it into
> 5.18 ... what did I miss?
Not much, sometimes patches are overlooked. I'll review it again, and if
everthing is fine, it will be applied for 5.19 once 5.18-rc1 is out.
Sorry for taking it so long.
Best regards,
Jernej
>
> Best regards
> Philip
>
> On 12.01.2022 at 16:49:27, Philip Rinn wrote:
> > Enable the audio hardware on the Olimex A64-OLinuXino board family.
> > Tested on the A64-OLinuXino-2Ge8G-IND variant.
> >
> > Signed-off-by: Philip Rinn <rinni@inventati.org>
> > ---
> >
> > Changes in v2: added missing &sound {...} part
> > Changes in v3: removed HDMI audio part as requested by Jernej Škrabec
> >
> > arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 30
> > +++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > index ec7e2c0e82c1..6f2674bb1b7f 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > @@ -58,6 +58,15 @@ wifi_pwrseq: wifi_pwrseq {
> > };
> > };
> >
> > +&codec {
> > + status = "okay";
> > +};
> > +
> > +&codec_analog {
> > + cpvdd-supply = <®_eldo1>;
> > + status = "okay";
> > +};
> > +
> > &cpu0 {
> > cpu-supply = <®_dcdc2>;
> > };
> > @@ -74,6 +83,10 @@ &cpu3 {
> > cpu-supply = <®_dcdc2>;
> > };
> >
> > +&dai {
> > + status = "okay";
> > +};
> > +
> > &de {
> > status = "okay";
> > };
> > @@ -328,6 +341,23 @@ &simplefb_hdmi {
> > vcc-hdmi-supply = <®_dldo1>;
> > };
> >
> > +&sound {
> > + simple-audio-card,aux-devs = <&codec_analog>;
> > + simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
> > + "Microphone", "Microphone Jack Right",
> > + "Headphone", "Headphone Jack";
> > + simple-audio-card,routing = "Left DAC", "DACL",
> > + "Right DAC", "DACR",
> > + "Headphone Jack", "HP",
> > + "ADCL", "Left ADC",
> > + "ADCR", "Right ADC",
> > + "Microphone Jack Left", "MBIAS",
> > + "MIC1", "Microphone Jack Left",
> > + "Microphone Jack Left", "HBIAS",
> > + "MIC2", "Microphone Jack Right";
> > + status = "okay";
> > +};
> > +
> > &uart0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&uart0_pb_pins>;
> > --
> > 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-26 6:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-28 16:28 [PATCH v3] arm64: dts: allwinner: a64: olinuxino: Enable audio Philip Rinn
2021-12-28 20:28 ` Philip Rinn
2022-01-11 20:08 ` [PATCH RESEND " Philip Rinn
2022-01-12 8:48 ` Maxime Ripard
2022-01-12 15:49 ` Philip Rinn
2022-03-24 16:28 ` [linux-sunxi] " Philip Rinn
2022-03-26 6:45 ` Jernej Škrabec [this message]
2022-04-07 2:49 ` Samuel Holland
2022-04-07 5:02 ` Jernej Škrabec
2022-04-07 15:51 ` [PATCH v4] " Philip Rinn
2022-04-07 22:06 ` Samuel Holland
2022-04-10 18:23 ` Jernej Škrabec
2022-05-08 17:38 ` Milan P. Stanić
2022-01-12 9:09 ` [linux-sunxi] [PATCH RESEND v3] " Priit Laes
2022-01-12 15:29 ` Philip Rinn
2022-01-13 6:59 ` Jernej Škrabec
2022-01-13 16:37 ` Philip Rinn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2621573.mvXUDI8C0e@kista \
--to=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime@cerno.tech \
--cc=rinni@inventati.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).