From mboxrd@z Thu Jan  1 00:00:00 1970
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: Wed, 08 Jan 2014 08:51:25 +0100
Subject: [PATCH v3 0/4] Lager and Koelsch reference serial port support
In-Reply-To: <20140108044416.GH15891@verge.net.au>
References: <1386767664-20113-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
 <3500878.UmMfVoYuQ7@avalon> <20140108044416.GH15891@verge.net.au>
Message-ID: <2632892.VB8aUk9VoW@avalon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Simon,

On Wednesday 08 January 2014 13:44:17 Simon Horman wrote:
> On Tue, Jan 07, 2014 at 09:03:13AM +0100, Laurent Pinchart wrote:
> > On Tuesday 07 January 2014 10:39:36 Simon Horman wrote:
> > > On Wed, Dec 11, 2013 at 02:14:20PM +0100, Laurent Pinchart wrote:
> > > > Hello,
> > > > 
> > > > This patch set implements serial port support for the Lager reference
> > > > board.
> > > > 
> > > > The code is available in my git tree at
> > > > 
> > > >         git://linuxtv.org/pinchartl/fbdev.git clocks/ccf/serial/boards
> > > > 
> > > > The patches are based on top of the "[PATCH 00/47] sh-sci updates for
> > > > v3.14" and "[PATCH v3 00/15] Lager and Koelsch multiplatform support"
> > > > patch series.
> > > 
> > > Hi Laurent, Hi Magnus,
> > > 
> > > I have marked this series as deferred, but to be honest
> > > I don't quite recall what we decided to do with it.
> > 
> > If I recall correctly the decision was to apply patches 1/4 and 2/4 for
> > v3.13 and delay 3/4 and 4/4.
> 
> In that case I apologise as I did not queue up 1/4 and 1/4 for v3.13.
> Instead I have now queued them up locally for v3.14 and will push them soon.

I actually meant v3.14, so all is good :-)

> I will leave 3/4 and 4/4 marked as deferred.

Sure. I'll resubmit them for v3.15.

> > > > Changes compared to v2:
> > > > 
> > > > - Added Koelsch support
> > > > 
> > > > Changes compared to v1:
> > > > 
> > > > - Removed early debugging support as it requires more work before
> > > > being
> > > > 
> > > >   mainlined
> > > > 
> > > > Laurent Pinchart (4):
> > > >   ARM: shmobile: r8a7790: Add serial ports to the device tree
> > > >   ARM: shmobile: r8a7791: Add serial ports to the device tree
> > > >   ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT
> > > >   ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT
> > > >  
> > > >  arch/arm/boot/dts/r8a7790-lager.dts              |  24 ++-
> > > >  arch/arm/boot/dts/r8a7790.dtsi                   | 100 +++++++++++++
> > > >  arch/arm/boot/dts/r8a7791-koelsch.dts            |  24 ++-
> > > >  arch/arm/boot/dts/r8a7791.dtsi                   | 180 ++++++++++++++
> > > >  arch/arm/mach-shmobile/board-koelsch-reference.c |  18 +--
> > > >  arch/arm/mach-shmobile/board-lager-reference.c   |  18 +--
> > > >  arch/arm/mach-shmobile/clock-r8a7790.c           |  16 +-
> > > >  arch/arm/mach-shmobile/clock-r8a7791.c           |  24 +--
> > > >  arch/arm/mach-shmobile/setup-r8a7790.c           |  26 ++--
> > > >  arch/arm/mach-shmobile/setup-r8a7791.c           |  34 ++---
> > > >  10 files changed, 374 insertions(+), 90 deletions(-)
-- 
Regards,

Laurent Pinchart