From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Thu, 24 Apr 2014 00:08:23 +0200 Subject: [PATCH v2.1 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf In-Reply-To: <5855371.5GIoOu8EnE@phil> References: <2104342.rkElQpXtvM@phil> <5855371.5GIoOu8EnE@phil> Message-ID: <2638137.1oBdcbvcY8@phil> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The s3c24xx cpufreq driver needs to change the mpll speed and was doing this by writing raw values from a translation table into the MPLLCON register. Change this to use a regular clk_set_rate call when using the common clock framework and only write the raw value in the samsung_clock case. The s3c cpufreq driver does already aquire the mpll, so simply add a reference to struct s3c_cpufreq_config to let set_fvco access it. While struct clk is opaque the differenciation between samsung clock and common clock is kept, as the samsung-clock mpll clk does not implement a real set_rate. Signed-off-by: Heiko Stuebner --- arch/arm/mach-s3c24xx/cpufreq-utils.c | 8 ++++++++ arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 1 + drivers/cpufreq/s3c24xx-cpufreq.c | 1 + 3 files changed, 10 insertions(+) diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 2a0aa56..c1b7508 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -60,5 +61,12 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { +#ifdef CONFIG_SAMSUNG_CLOCK __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); +#endif + +#ifdef CONFIG_COMMON_CLK + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); +#endif } diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 7231c8e..72d4178 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -119,6 +119,7 @@ struct s3c_plltab { struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_freq max; + struct clk *mpll; struct cpufreq_frequency_table pll; struct s3c_clkdivs divs; struct s3c_cpufreq_info *info; /* for core, not drivers */ diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index be1b2b5..227ebf7 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) { + cfg->mpll = _clk_mpll; (cfg->info->set_fvco)(cfg); } -- 1.9.0