From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 1/7] ARM: vf610: add low level debug support for !MMU
Date: Sun, 12 Oct 2014 20:48:13 +0200 [thread overview]
Message-ID: <2650196.D7500rgcAr@wuerfel> (raw)
In-Reply-To: <331b5f06d72890ac348adcd8cce616db576eb10e.1413136383.git.stefan@agner.ch>
On Sunday 12 October 2014 20:13:55 Stefan Agner wrote:
> Add support for !MMU low level debug required for the secondary
> Cortex-M4 core in Vybrid.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm/include/debug/vf.S | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
> index b889338..63c7ef7 100644
> --- a/arch/arm/include/debug/vf.S
> +++ b/arch/arm/include/debug/vf.S
> @@ -17,12 +17,22 @@
>
> #define VF_UART_VIRTUAL_BASE 0xfe000000
>
> +#ifdef CONFIG_MMU
> +
> .macro addruart, rp, rv, tmp
> ldr \rp, =VF_UART_PHYSICAL_BASE @ physical
> and \rv, \rp, #0xffffff @ offset within 16MB section
> add \rv, \rv, #VF_UART_VIRTUAL_BASE
> .endm
>
> +#else /* !CONFIG_MMU */
> +
> + .macro addruart, rx, tmp
> + ldr \rx, =(VF_UART_PHYSICAL_BASE) @ physical
> + .endm
> +
> +#endif /* CONFIG_MMU */
> +
> .macro senduart, rd, rx
> strb \rd, [\rx, #0x7] @ Data Register
> .endm
>
Hmm, I've previously needed to add this patch for randconfig testing:
index 78c91b5f97d4..ea9646cc2a0e 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -35,7 +35,7 @@
#else /* !CONFIG_MMU */
.macro addruart_current, rx, tmp1, tmp2
- addruart \rx, \tmp1
+ addruart \rx, \tmp1, \tmp2
.endm
#endif /* CONFIG_MMU */
If we do this instead, could we avoid your patch?
Arnd
next prev parent reply other threads:[~2014-10-12 18:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-12 18:13 [RFC 0/7] ARM: vf610m4: Add Vybrid Cortex-M4 support Stefan Agner
2014-10-12 18:13 ` [RFC 1/7] ARM: vf610: add low level debug support for !MMU Stefan Agner
2014-10-12 18:48 ` Arnd Bergmann [this message]
2014-10-13 9:26 ` Stefan Agner
2014-10-12 18:13 ` [RFC 2/7] clocksource: add dependencies for Vybrid pit clocksource Stefan Agner
2014-10-12 18:18 ` Uwe Kleine-König
2014-10-13 9:46 ` Stefan Agner
2014-10-13 10:57 ` Uwe Kleine-König
2014-10-12 18:13 ` [RFC 3/7] ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4 Stefan Agner
2014-10-12 18:51 ` Arnd Bergmann
2014-10-13 10:03 ` Stefan Agner
2014-10-13 10:57 ` Arnd Bergmann
2014-10-12 18:13 ` [RFC 4/7] ARM: dts: add support for Vybrid running " Stefan Agner
2014-10-12 18:56 ` Arnd Bergmann
2014-10-13 10:41 ` Stefan Agner
2014-10-13 10:32 ` Mark Rutland
2014-10-13 11:08 ` Stefan Agner
2014-10-13 11:24 ` Arnd Bergmann
2014-10-13 16:11 ` Stefan Agner
2014-10-13 19:54 ` Arnd Bergmann
2014-10-13 21:20 ` Stefan Agner
2014-10-14 10:01 ` Arnd Bergmann
2014-10-12 18:13 ` [RFC 5/7] irqchip: nvic: increase number of external interrupts to 112 Stefan Agner
2014-10-12 18:14 ` [RFC 6/7] ARM: vf610m4: HACK: get dtb pointer from SRC_GPR3 Stefan Agner
2014-10-12 19:00 ` Arnd Bergmann
2014-10-13 10:10 ` Stefan Agner
2014-10-12 18:14 ` [RFC 7/7] ARM: vf610m4: add defconfig for Linux on Vybrids Cortex-M4 Stefan Agner
2014-11-28 14:17 ` [RFC 0/7] ARM: vf610m4: Add Vybrid Cortex-M4 support Andreas Färber
2014-11-28 16:00 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2650196.D7500rgcAr@wuerfel \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox