From mboxrd@z Thu Jan 1 00:00:00 1970 From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov) Date: Sun, 14 Feb 2016 01:26:34 +0300 Subject: [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node In-Reply-To: <1674850.BZpGW9kEud@wasted.cogentembedded.com> References: <1674850.BZpGW9kEud@wasted.cogentembedded.com> Message-ID: <2684686.0L09MeB6pA@wasted.cogentembedded.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org In the final versions of the Porter board (called "PORTER_C") Renesas decided to get rid of the Maxim Integrated MAX3355 OTG chip and didn't add any other provision to differ the host/gadget mode, so we'll have to remove no longer valid "renesas,enable-gpio" property from the HS-USB device node. Hopefully, the earlier revisions of the board were never seen in the wild... Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support") Reported-by: Yoshihiro Shimoda Signed-off-by: Sergei Shtylyov --- This patch is against the 'master' branch of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/r8a7791-porter.dts | 1 - 1 file changed, 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts @@ -283,7 +283,6 @@ pinctrl-names = "default"; status = "okay"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy {