* [PATCH v3 1/6] arm: add device-tree SoC bindings for Axis Artpec-6
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
@ 2016-02-11 16:06 ` Lars Persson
2016-02-12 16:40 ` Rob Herring
2016-02-11 16:06 ` [PATCH v3 2/6] arm: dts: add Artpec-6 SoC dtsi file Lars Persson
` (5 subsequent siblings)
6 siblings, 1 reply; 11+ messages in thread
From: Lars Persson @ 2016-02-11 16:06 UTC (permalink / raw)
To: linux-arm-kernel
This adds device tree bindings for the Artpec-6 SoC.
Signed-off-by: Lars Persson <larper@axis.com>
---
Documentation/devicetree/bindings/arm/axis.txt | 29 ++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/axis.txt
diff --git a/Documentation/devicetree/bindings/arm/axis.txt b/Documentation/devicetree/bindings/arm/axis.txt
new file mode 100644
index 0000000..ae345e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axis.txt
@@ -0,0 +1,29 @@
+Axis Communications AB
+ARTPEC series SoC Device Tree Bindings
+
+ARTPEC-6 ARM SoC
+================
+
+Required root node properties:
+- compatible = "axis,artpec6";
+
+ARTPEC-6 System Controller
+--------------------------
+
+The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
+and resets.
+
+Required properties:
+- compatible: "axis,artpec6-syscon", "syscon"
+- reg: Address and length of the register bank.
+
+Example:
+ syscon {
+ compatible = "axis,artpec6-syscon", "syscon";
+ reg = <0xf8000000 0x48>;
+ };
+
+ARTPEC-6 Development board:
+---------------------------
+Required root node properties:
+- compatible = "axis,artpec6-dev-board", "axis,artpec6";
--
2.1.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 2/6] arm: dts: add Artpec-6 SoC dtsi file
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
2016-02-11 16:06 ` [PATCH v3 1/6] arm: add device-tree SoC bindings for Axis Artpec-6 Lars Persson
@ 2016-02-11 16:06 ` Lars Persson
2016-02-25 0:29 ` Olof Johansson
2016-02-11 16:06 ` [PATCH v3 3/6] arm: dts: add Artpec-6 development board dts Lars Persson
` (4 subsequent siblings)
6 siblings, 1 reply; 11+ messages in thread
From: Lars Persson @ 2016-02-11 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Initial device tree for the Artpec-6 SoC.
Signed-off-by: Lars Persson <larper@axis.com>
---
arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 236 insertions(+)
create mode 100644 arch/arm/boot/dts/artpec6.dtsi
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
new file mode 100644
index 0000000..f2a7e4a
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -0,0 +1,236 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "axis,artpec6";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&pl310>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&pl310>;
+ };
+ };
+
+ syscon {
+ compatible = "axis,artpec6-syscon", "syscon";
+ reg = <0xf8000000 0x48>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ psci_version = <0x84000000>;
+ cpu_on = <0x84000003>;
+ system_reset = <0x84000009>;
+ };
+
+ scu at faf00000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfaf00000 0x58>;
+ };
+
+ /* Main external clock driving CPU and peripherals */
+ ext_clk: ext_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ /* PLL1 is used by CPU and some peripherals */
+ pll1_clk: pll1_clk at f8000000 {
+ #clock-cells = <0>;
+ compatible = "axis,artpec6-pll1-clock";
+ reg = <0xf8000000 4>;
+ clocks = <&ext_clk>;
+ };
+
+ cpu_clk: cpu_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&pll1_clk>;
+ clock-output-names = "cpu_clk";
+ };
+
+ cpu_clkdiv2: cpu_clkdiv2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&cpu_clk>;
+ };
+
+ cpu_clkdiv4: cpu_clkdiv4 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&cpu_clk>;
+ };
+
+ apb_pclk: apb_pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&cpu_clk>;
+ clock-output-names = "apb_pclk";
+ };
+
+ /* PLL2 is used by a number of peripherals, including UDL */
+ pll2: pll2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <24>;
+ clocks = <&ext_clk>;
+ };
+
+ /* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */
+ pll2div2: pll2div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+
+ pll2div12: pll2div12 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <12>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+
+ pll2div24: pll2div24 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ clock-output-names = "uart_clk";
+ };
+
+
+ gtimer at faf00200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xfaf00200 0x20>;
+ interrupts = <GIC_PPI 11 0xf01>;
+ clocks = <&cpu_clkdiv2>;
+ };
+
+ timer at faf00600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfaf00600 0x20>;
+ interrupts = <GIC_PPI 13 0xf04>;
+ clocks = <&cpu_clkdiv2>;
+ status = "disabled";
+ };
+
+ intc: interrupt-controller at faf01000 {
+ interrupt-controller;
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+ };
+
+ pl310: cache-controller at faf10000 {
+ compatible = "arm,pl310-cache";
+ cache-unified;
+ cache-level = <2>;
+ reg = <0xfaf10000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <1 1 1>;
+ arm,filter-ranges = <0x0 0x80000000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ };
+
+ amba at 0 {
+ compatible = "simple-bus";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ dma-ranges = <0x80000000 0x00000000 0x40000000>;
+ dma-coherent;
+
+ ethernet: ethernet at f8010000 {
+ clock-names = "phy_ref_clk", "apb_pclk";
+ clocks = <&ext_clk>, <&apb_pclk>;
+ compatible = "snps,dwc-qos-ethernet-4.10";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf8010000 0x4000>;
+
+ snps,write-requests = <2>;
+ snps,read-requests = <16>;
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+
+ status = "disabled";
+ };
+
+ uart0: serial at f8036000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8036000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ uart1: serial at f8037000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8037000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ uart2: serial at f8038000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8038000 0x1000>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ uart3: serial at f8039000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8039000 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 2/6] arm: dts: add Artpec-6 SoC dtsi file
2016-02-11 16:06 ` [PATCH v3 2/6] arm: dts: add Artpec-6 SoC dtsi file Lars Persson
@ 2016-02-25 0:29 ` Olof Johansson
0 siblings, 0 replies; 11+ messages in thread
From: Olof Johansson @ 2016-02-25 0:29 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 11, 2016 at 05:06:17PM +0100, Lars Persson wrote:
> Initial device tree for the Artpec-6 SoC.
>
> Signed-off-by: Lars Persson <larper@axis.com>
> ---
> arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 236 insertions(+)
> create mode 100644 arch/arm/boot/dts/artpec6.dtsi
>
> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
> new file mode 100644
> index 0000000..f2a7e4a
> --- /dev/null
> +++ b/arch/arm/boot/dts/artpec6.dtsi
> @@ -0,0 +1,236 @@
> +/*
> + * Device Tree Source for the Axis ARTPEC-6 SoC
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
I just realized these are GPL-only. We try to get most DTS/DTSI files dual
licensed now so that they can be separated from the linux kernel and used in
other projects. You can see the boilerplate used by other platforms in the same
directory.
I'd appreciate a patch that changed the licensing (it can be done on top of
this, since I already applied the patches we might as well keep them and fix
incrementally).
(Let me know if your corporate lawyers are giving you a hard time over this,
I'd be happy to talk to them to explain if needed).
-Olof
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 3/6] arm: dts: add Artpec-6 development board dts
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
2016-02-11 16:06 ` [PATCH v3 1/6] arm: add device-tree SoC bindings for Axis Artpec-6 Lars Persson
2016-02-11 16:06 ` [PATCH v3 2/6] arm: dts: add Artpec-6 SoC dtsi file Lars Persson
@ 2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 4/6] arm: initial machine port for artpec-6 SoC Lars Persson
` (3 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Lars Persson @ 2016-02-11 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Lars Persson <larper@axis.com>
---
arch/arm/boot/dts/Makefile | 2 ++
arch/arm/boot/dts/artpec6-devboard.dts | 64 ++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..2ebe99c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -2,6 +2,8 @@ ifeq ($(CONFIG_OF),y)
dtb-$(CONFIG_ARCH_ALPINE) += \
alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+ artpec6-devboard.dtb
dtb-$(CONFIG_MACH_ASM9260) += \
alphascale-asm9260-devkit.dtb
# Keep at91 dtb files sorted alphabetically for each SoC
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 0000000..f823ed3
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+/*
+ * Axis ARTPEC-6 development board.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+ model = "ARTPEC-6 development board";
+ compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ phy1: phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ device_type = "ethernet-phy";
+ reg = <0x0>;
+ };
+ };
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 4/6] arm: initial machine port for artpec-6 SoC
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
` (2 preceding siblings ...)
2016-02-11 16:06 ` [PATCH v3 3/6] arm: dts: add Artpec-6 development board dts Lars Persson
@ 2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 5/6] arm: multi_v7_defconfig: add MACH_ARTPEC6 Lars Persson
` (2 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Lars Persson @ 2016-02-11 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Basic machine port for the Artpec-6 SoC from Axis
Communications.
Signed-off-by: Lars Persson <larper@axis.com>
---
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/mach-artpec/Kconfig | 20 ++++++++++
arch/arm/mach-artpec/Makefile | 1 +
arch/arm/mach-artpec/board-artpec6.c | 72 ++++++++++++++++++++++++++++++++++++
5 files changed, 96 insertions(+)
create mode 100644 arch/arm/mach-artpec/Kconfig
create mode 100644 arch/arm/mach-artpec/Makefile
create mode 100644 arch/arm/mach-artpec/board-artpec6.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4f799e5..e1565dd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -724,6 +724,8 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-alpine/Kconfig"
+source "arch/arm/mach-artpec/Kconfig"
+
source "arch/arm/mach-asm9260/Kconfig"
source "arch/arm/mach-at91/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fe25410..4eb24c6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_ALPINE) += alpine
+machine-$(CONFIG_ARCH_ARTPEC) += artpec
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_AXXIA) += axxia
machine-$(CONFIG_ARCH_BCM) += bcm
diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig
new file mode 100644
index 0000000..6cbe5a2
--- /dev/null
+++ b/arch/arm/mach-artpec/Kconfig
@@ -0,0 +1,20 @@
+menuconfig ARCH_ARTPEC
+ bool "Axis Communications ARM based ARTPEC SoCs"
+ depends on ARCH_MULTI_V7
+
+if ARCH_ARTPEC
+
+config MACH_ARTPEC6
+ bool "Axis ARTPEC-6 ARM Cortex A9 Platform"
+ depends on ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_GLOBAL_TIMER
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ help
+ Support for Axis ARTPEC-6 ARM Cortex A9 Platform
+
+endif
diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile
new file mode 100644
index 0000000..78325f0
--- /dev/null
+++ b/arch/arm/mach-artpec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o
diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c
new file mode 100644
index 0000000..71513df
--- /dev/null
+++ b/arch/arm/mach-artpec/board-artpec6.c
@@ -0,0 +1,72 @@
+/*
+ * ARTPEC-6 device support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <asm/smp_scu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/psci.h>
+#include <linux/arm-smccc.h>
+
+
+#define ARTPEC6_DMACFG_REGNUM 0x10
+#define ARTPEC6_DMACFG_UARTS_BURST 0xff
+
+#define SECURE_OP_L2C_WRITEREG 0xb4000001
+
+static void __init artpec6_init_machine(void)
+{
+ struct regmap *regmap;
+
+ regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon");
+
+ if (!IS_ERR(regmap)) {
+ /* Use PL011 DMA Burst Request signal instead of DMA
+ * Single Request
+ */
+ regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
+ ARTPEC6_DMACFG_UARTS_BURST);
+ };
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0,
+ 0, 0, 0, 0, &res);
+
+ WARN_ON(res.a0);
+}
+
+static const char * const artpec6_dt_match[] = {
+ "axis,artpec6",
+ NULL
+};
+
+DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform")
+ .l2c_aux_val = 0x0C000000,
+ .l2c_aux_mask = 0xF3FFFFFF,
+ .l2c_write_sec = artpec6_l2c310_write_sec,
+ .init_machine = artpec6_init_machine,
+ .dt_compat = artpec6_dt_match,
+MACHINE_END
--
2.1.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 5/6] arm: multi_v7_defconfig: add MACH_ARTPEC6
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
` (3 preceding siblings ...)
2016-02-11 16:06 ` [PATCH v3 4/6] arm: initial machine port for artpec-6 SoC Lars Persson
@ 2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 6/6] arm: mach-artpec: add entry to MAINTAINERS Lars Persson
2016-02-11 16:20 ` [PATCH v3 0/6] arm: Add Artpec-6 SoC Arnd Bergmann
6 siblings, 0 replies; 11+ messages in thread
From: Lars Persson @ 2016-02-11 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Lars Persson <larper@axis.com>
---
arch/arm/configs/multi_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8e8b2ac..1149642 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -16,6 +16,8 @@ CONFIG_ARCH_MULTI_V7=y
# CONFIG_ARCH_MULTI_V4 is not set
CONFIG_ARCH_VIRT=y
CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_ARTPEC=y
+CONFIG_MACH_ARTPEC6=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
@@ -227,6 +229,7 @@ CONFIG_R8169=y
CONFIG_SH_ETH=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
+CONFIG_SYNOPSYS_DWC_ETH_QOS=y
CONFIG_TI_CPSW=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
--
2.1.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 6/6] arm: mach-artpec: add entry to MAINTAINERS
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
` (4 preceding siblings ...)
2016-02-11 16:06 ` [PATCH v3 5/6] arm: multi_v7_defconfig: add MACH_ARTPEC6 Lars Persson
@ 2016-02-11 16:06 ` Lars Persson
2016-02-11 16:20 ` [PATCH v3 0/6] arm: Add Artpec-6 SoC Arnd Bergmann
6 siblings, 0 replies; 11+ messages in thread
From: Lars Persson @ 2016-02-11 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
MAINTAINERS | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..d32c1aa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -932,6 +932,16 @@ M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
S: Maintained
F: arch/arm/mach-alpine/
+ARM/ARTPEC MACHINE SUPPORT
+M: Jesper Nilsson <jesper.nilsson@axis.com>
+M: Lars Persson <lars.persson@axis.com>
+M: Niklas Cassel <niklas.cassel@axis.com>
+S: Maintained
+L: linux-arm-kernel at axis.com
+F: arch/arm/mach-artpec
+F: arch/arm/boot/dts/artpec6*
+F: drivers/clk/clk-artpec6.c
+
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
--
2.1.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 0/6] arm: Add Artpec-6 SoC
2016-02-11 16:06 [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
` (5 preceding siblings ...)
2016-02-11 16:06 ` [PATCH v3 6/6] arm: mach-artpec: add entry to MAINTAINERS Lars Persson
@ 2016-02-11 16:20 ` Arnd Bergmann
2016-02-24 22:00 ` Olof Johansson
6 siblings, 1 reply; 11+ messages in thread
From: Arnd Bergmann @ 2016-02-11 16:20 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 11 February 2016 17:06:15 Lars Persson wrote:
> Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
> ethernet are wired up.
>
> Changes since v2:
> - Create a syscon binding for the system controller.
> - Clock patches split out to new patch series "clk: Add Artpec-6 SoC support".
Looks all good to me now, impressive for v3 on a new platform port!
We'll apply it in the next few days, unless further review comments come in.
If you end up resending, please add my
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Arnd
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v3 0/6] arm: Add Artpec-6 SoC
2016-02-11 16:20 ` [PATCH v3 0/6] arm: Add Artpec-6 SoC Arnd Bergmann
@ 2016-02-24 22:00 ` Olof Johansson
0 siblings, 0 replies; 11+ messages in thread
From: Olof Johansson @ 2016-02-24 22:00 UTC (permalink / raw)
To: linux-arm-kernel
Hej,
On Thu, Feb 11, 2016 at 05:20:27PM +0100, Arnd Bergmann wrote:
> On Thursday 11 February 2016 17:06:15 Lars Persson wrote:
> > Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
> > ethernet are wired up.
> >
> > Changes since v2:
> > - Create a syscon binding for the system controller.
> > - Clock patches split out to new patch series "clk: Add Artpec-6 SoC support".
>
> Looks all good to me now, impressive for v3 on a new platform port!
>
> We'll apply it in the next few days, unless further review comments come in.
Indeed, nice and clean. I have two minor nits:
1) We prefix with ARM:, not arm:. I fixed this up for you. I also added ARM:
dts: artpeg: ... on the dts changes. Not a huge deail on those.
2) Several of the patches lacked description. Subject pretty much says it all,
but it's still nice to have a sentence or two as description. Again, not
a huge deal, and I applied anyway, but for the future think about it.
That being said, I've applied the series across next/soc, next/dt and
next/defconfig. Thanks!
-Olof
^ permalink raw reply [flat|nested] 11+ messages in thread