[PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx

[tomasz.figa@gmail.com (Tomasz Figa)]

On Wednesday 07 of August 2013 07:11:40 Kukjin Kim wrote:
> On 08/07/13 07:06, Tomasz Figa wrote:
> > On Tuesday 06 of August 2013 12:47:51 Mike Turquette wrote:
> >> Quoting Tomasz Figa (2013-08-05 16:42:16)
> >> 
> >>> On Monday 05 of August 2013 12:02:16 Mike Turquette wrote:
> >>>> Quoting Kukjin Kim (2013-08-05 11:13:55)
> >>>> 
> >>>>> On 08/06/13 03:06, Mike Turquette wrote:
> >>>>>> Quoting Kukjin Kim (2013-08-05 10:01:36)
> >>>>>> 
> >>>>>>> On 07/23/13 08:49, Tomasz Figa wrote:
> >>>>>>>> This series is an attempt to move clock support on Samsung
> >>>>>>>> S3C64xx
> >>>>>>>> SoCs
> >>>>>>>> to Common Clock Framework.
> >>>>>>>> 
> >>>>>>>> First, support for PLL types present on S3C64xx SoCs is added
> >>>>>>>> to
> >>>>>>>> Samsung Common Clock Framework driver. Then the main clock
> >>>>>>>> driver
> >>>>>>>> for mentioned SoCs is introduced. Further patches contain
> >>>>>>>> fixes
> >>>>>>>> for drivers to make them compliant with CCF semantics,
> >>>>>>>> migration
> >>>>>>>> of platform code to use the new clock driver and removal of
> >>>>>>>> old
> >>>>>>>> clock management code.
> >>>>>>>> 
> >>>>>>>> Depends on:
> >>>>>>>>     - [PATCH v4 00/20] Samsung PWM support cleanup
> >>>>>>>>     
> >>>>>>>>       http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20
> >>>>>>>>       856
> >>>>>>>> 
> >>>>>>>> On S3C6410-based Tiny6410 board (Mini6410-compatible):
> >>>>>>>> 
> >>>>>>>> Tested-by: Tomasz Figa<tomasz.figa@gmail.com>
> >>>>>>>> 
> >>>>>>>> For v1:
> >>>>>>>> 
> >>>>>>>> Acked-by: Mike Turquette<mturquette@linaro.org>
> >>>>>>>> 
> >>>>>>>> Changes since v1:
> >>>>>>>>     - added patch for read-only muxes,
> >>>>>>>>     - exported configurable muxes and dividers,
> >>>>>>>>     - defined mout_syncmux as read-only mux,
> >>>>>>>>     - in DT-enabled case fixed-clock binding is used to define
> >>>>>>>>     external clocks.>  >>>
> >>>>>>>> 
> >>>>>>>> Tomasz Figa (8):
> >>>>>>>>      clk: mux: Add support for read-only muxes.
> >>>>>>>>      clk: samsung: pll: Add support for PLL6552 and PLL6553
> >>>>>>>>      clk: samsung: Add clock driver for S3C64xx SoCs
> >>>>>>>>      ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros
> >>>>>>>>      ARM: s3c64xx: dma: Use
> >>>>>>>>      clk_prepare_enable/clk_disable_unprepare
> >>>>>>>>      usb: host: ohci-s3c2410 Use
> >>>>>>>>      clk_prepare_enable/clk_disable_unprepare
> >>>>>>>>      ARM: s3c64xx: Migrate clock handling to Common Clock
> >>>>>>>>      Framework
> >>>>>>>>      ARM: s3c64xx: Remove old clock management code
> >>>>>>>>     
> >>>>>>>>     .../bindings/clock/samsung,s3c64xx-clock.txt       |   77
> >>>>>>>>     ++
> >>>>>>>>     arch/arm/Kconfig                                   |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/Makefile                     |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/clock.c                      | 1007
> >>>>>>>>     -------------------- arch/arm/mach-s3c64xx/common.c
> >>>>>>>>     
> >>>>>>>>              |   21 +-
> >>>>>>>>     
> >>>>>>>>     arch/arm/mach-s3c64xx/common.h                     |   12
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/dma.c                        |    4
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/include/mach/regs-clock.h    |  132
> >>>>>>>>     +--
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-anw6410.c               |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-crag6410.c              |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-hmt.c                   |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-mini6410.c              |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-ncp.c                   |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-smartq.c                |   11
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-smdk6400.c              |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/mach-smdk6410.c              |    2
> >>>>>>>>     +-
> >>>>>>>>     arch/arm/mach-s3c64xx/pm.c                         |   21 -
> >>>>>>>>     arch/arm/mach-s3c64xx/s3c6400.c                    |    6 -
> >>>>>>>>     arch/arm/mach-s3c64xx/s3c6410.c                    |    7 -
> >>>>>>>>     arch/arm/plat-samsung/include/plat/cpu.h           |    4 +
> >>>>>>>>     drivers/clk/clk-mux.c                              |   10
> >>>>>>>>     +-
> >>>>>>>>     drivers/clk/samsung/Makefile                       |    1 +
> >>>>>>>>     drivers/clk/samsung/clk-pll.c                      |  160
> >>>>>>>>     ++++
> >>>>>>>>     drivers/clk/samsung/clk-pll.h                      |    4 +
> >>>>>>>>     drivers/clk/samsung/clk-s3c64xx.c                  |  465
> >>>>>>>>     +++++++++
> >>>>>>>>     drivers/usb/host/ohci-s3c2410.c                    |    8
> >>>>>>>>     +-
> >>>>>>>>     include/dt-bindings/clock/samsung,s3c64xx-clock.h  |  178
> >>>>>>>>     ++++
> >>>>>>>>     include/linux/clk-provider.h                       |    2 +
> >>>>>>>>     28 files changed, 943 insertions(+), 1205 deletions(-)
> >>>>>>>>     create mode 100644
> >>>>>>>>     Documentation/devicetree/bindings/clock/samsung,s3c64xx-clo
> >>>>>>>>     ck.
> >>>>>>>>     txt delete mode 100644 arch/arm/mach-s3c64xx/clock.c
> >>>>>>>>     create mode 100644 drivers/clk/samsung/clk-s3c64xx.c
> >>>>>>>>     create mode 100644
> >>>>>>>>     include/dt-bindings/clock/samsung,s3c64xx-clock.h
> >>>>>>> 
> >>>>>>> Basically, this series looks good to me, but I'm not sure how
> >>>>>>> this
> >>>>>>> should be handled because of dependency with PWM cleanup and
> >>>>>>> clk
> >>>>>>> stuff
> >>>>>>> in clk tree now...
> >>>>>> 
> >>>>>> Patches 1-3 can go into the clk tree. 4-6 should go through
> >>>>>> their
> >>>>>> respective trees.
> >>>>>> 
> >>>>>> If you want I can take 7&   8 through the clk tree.
> >>>>>> 
> >>>>>> Alternatively I can provide patches 1-3 in a separate stable
> >>>>>> topic
> >>>>>> branch for you to pull in as a dependency. We'll both merge that
> >>>>>> stable
> >>>>>> topic branch into our trees and you can make a note of it for
> >>>>>> the
> >>>>>> arm-soc folks.
> >>>>> 
> >>>>> Thanks for your quick response. Would be helpful to samsung tree
> >>>>> if
> >>>>> you
> >>>>> could provide a separate stable topic branch what you suggested
> >>>>> for
> >>>>> clk
> >>>>> stuff in this series.
> >>>> 
> >>>> git://git.linaro.org/people/mturquette/linux.git clk-next-s3c64xx
> >>>> 
> >>>> Topic branch contains patches 1-3 of this series on top of
> >>>> v3.11-rc2. I
> >>>> have already merged the same into the clk-next branch.
> 
> Mike, thanks. I've merged the branch 'clk-next-s3c64xx' into the samsung
> tree :)
> 
> >>> What about the dependency on PWM cleanup series? Patches 7-8 must be
> >>> merged after them, otherwise there will be a regression, because the
> >>> old PWM clocksource driver will be broken and so s3c64xx won't boot
> >>> until moved to new one, which is done by mentioned series.
> >> 
> >> Is this a question for me? I did not take patches 7 or 8 into
> >> clk-next.
> >> Sounds like those patches should go through Samsung tree into
> >> arm-soc,
> >> and perhaps be a late-applied branch to get the ordering right.
> > 
> > It's just continuation of the topic. I guess the question is mostly
> > for
> > Kukjin. Anyway, your suggestion is most likely the right thing,
> > thanks.
> 
> Tomasz, I can handle. Thanks.

Good. You're welcome.

Best regards,
Tomasz