Re: [PATCH v3 0/2] rockchip: Enable Ethernet controller on Radxa E20C

["Heiko Stübner" <heiko@sntech.de>]

Am Freitag, 9. Mai 2025, 22:23:56 Mitteleuropäische Sommerzeit schrieb Jonas Karlman:
> The Rockchip RK3528 has two Ethernet controllers, one 100/10 MAC to be
> used with the integrated PHY and a second 1000/100/10 MAC to be used
> with an external Ethernet PHY.
> 
> This series add device tree nodes for the Ethernet controllers found in
> RK3528 and enable the LAN interface on Radxa E20C.
> 
> This include a gmac0 node for the 100/10 MAC and its related integrated
> PHY node that only have recived limited testing. I have no board that
> expose an Ethernet port for the gmac0 and the integrated PHY. However,
> the PHY can be identified on addr 0x2 as 0044.1400 and in vendor kernel
> this relate to the Rockchip RK630 PHY. A proper PHY driver will be
> needed to support any real use of gmac0.
> 
> Changes in v3:
> - Rebase on top of latest mmind/for-next
> 
> Changes in v2:
> - Split from the "Add GMAC support for RK3528" driver series [1]

split from ... was that series merged already?

The linked lore-thread only talks about the series needing to be reposted.


Heiko

> - Add ethernet-phy@2 for the integrated PHY
> - Rebase on top of the "Support I2C controllers in RK3528" series [2]
> 
> [1] https://lore.kernel.org/r/20250309232622.1498084-1-jonas@kwiboo.se
> [2] https://lore.kernel.org/r/20250309070603.35254-1-ziyao@disroot.org
> 
> Jonas Karlman (2):
>   arm64: dts: rockchip: Add GMAC nodes for RK3528
>   arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
> 
>  .../boot/dts/rockchip/rk3528-radxa-e20c.dts   |  30 +++++
>  arch/arm64/boot/dts/rockchip/rk3528.dtsi      | 105 ++++++++++++++++++
>  2 files changed, 135 insertions(+)
> 
>