[PATCH 0/2] ARM: dts: imx6: Add support for Toradex Apalis SoM/Ixora

[PATCH 0/2] ARM: dts: imx6: Add support for Toradex Apalis SoM/Ixora

[Petr Štetiar]

This patch series adds support for Toradex Apalis SoM module[1] and Ixora
carrier board[2].

I've simply taken taken content of DTSes from Toradex's Git tree[3], removed
not mainlined stuff and fixed all errors returned by checkpatch script, some
warnings about 80 line length limit still remains, though.

PCIe slot on Ixora board uses reset-gpio which is active low, which isn't
currently supported, so "PCI: imx6: Fix reset-gpio to work with active low
GPIO" fix [4] is needed.

1. https://www.toradex.com/computer-on-modules/apalis-arm-family/freescale-imx-6
2. https://www.toradex.com/products/carrier-boards/ixora-carrier-board
3. https://git.toradex.com/cgit/linux-toradex.git/log/?h=toradex_imx_3.14.28_1.0.0_ga
4. https://patchwork.kernel.org/patch/7628361/

Petr ?tetiar (2):
  ARM: dts: imx6: Add support for Toradex Apalis SoM
  ARM: dts: imx6: Add support for Toradex Apalis Ixora board

 arch/arm/boot/dts/Makefile                    |    2 +
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |   25 +
 arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts |   33 +
 arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi   |  211 ++++++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi         |  951 +++++++++++++++++++++++++
 5 files changed, 1222 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-apalis-ixora.dts
 create mode 100644 arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-apalis.dtsi

-- 
1.7.9.5

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Petr Štetiar]

Signed-off-by: Petr ?tetiar <ynezz@true.cz>
---
 arch/arm/boot/dts/imx6qdl-apalis.dtsi |  951 +++++++++++++++++++++++++++++++++
 1 file changed, 951 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6qdl-apalis.dtsi

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
new file mode 100644
index 0000000..610d844
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -0,0 +1,951 @@
+/*
+ * Copyright 2014-2015 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q Module";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		status = "disabled";
+	};
+
+	clocks {
+		clk24m: clk24m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	i2cddc: i2c at 0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_ddc>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_1p8v: 1p8v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			status = "disabled";
+		};
+
+		/* on module usb hub */
+		reg_usb_host_vbus_hub: usb_host_vbus_hub {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+			regulator-name = "usb_host_vbus_hub";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <2000>;
+			enable-active-high;
+			status = "okay";
+		};
+
+		reg_usb_host_vbus: usb_host_vbus {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+			regulator-name = "usb_host_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&reg_usb_host_vbus_hub>;
+			status = "disabled";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_audmux_mclk>;
+	status = "okay";
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_spi_cs1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_spi_cs2>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	#address-cells = <0>;
+	#size-cells = <1>;
+	phy_int {
+		reg = <0x6>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
+ * board)
+ */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100 at 08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/*
+ * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	gpios = <&gpio3 18 GPIO_ACTIVE_HIGH /* sda */
+		 &gpio3 17 GPIO_ACTIVE_HIGH /* scl */
+		 >;
+	status = "disabled";
+};
+
+/* PAD Ctrl values for common settings */
+/* (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
+#define PAD_CTRL_HYS_PU 0x1b0b0
+
+/* (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
+#define PAD_CTRL_HYS_PD 0x130b0
+
+/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
+#define PAD_CTRL_PU_22k 0x0f058
+
+#define PAD_CTRL_NO 0x80000000
+
+&iomuxc {
+	ecspi {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+				MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+				MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			>;
+		};
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			>;
+		};
+		pinctrl_spi_cs1: spi_cs1 {
+			fsl,pins = <
+				/* SPI1 cs */
+				MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 PAD_CTRL_NO
+				>;
+		};
+		pinctrl_spi_cs2: spi_cs2 {
+			fsl,pins = <
+				/* SPI2 cs */
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26 PAD_CTRL_NO
+				>;
+		};
+	};
+
+	flexcan {
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX   0x80000000
+				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX   0x80000000
+			>;
+		};
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+			>;
+		};
+	};
+
+	gpio {
+		pinctrl_apalis_gpio1: apalis_gpio1 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio2: apalis_gpio2 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio3: apalis_gpio3 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio4: apalis_gpio4 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio5: apalis_gpio5 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio6: apalis_gpio6 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio7: apalis_gpio7 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_apalis_gpio8: apalis_gpio8 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06 PAD_CTRL_HYS_PD
+			>;
+		};
+		pinctrl_gpio_keys: gpio_keys {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04 PAD_CTRL_HYS_PU
+				>;
+		};
+	};
+
+	hdmi {
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+	};
+
+	i2c {
+		pinctrl_i2c_ddc: i2c_ddc {
+			fsl,pins = <
+				/* DDC bitbang */
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30 PAD_CTRL_HYS_PU
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16 PAD_CTRL_HYS_PU
+				>;
+		};
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+			>;
+		};
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+		pinctrl_i2c3_recovery: i2c3-recoverygrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+			>;
+		};
+	};
+
+	/* pins used on module */
+	imx6q-apalis {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reset_moci &pinctrl_emmc_reset>;
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+				MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+				MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+				MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+			>;
+		};
+		pinctrl_audmux_mclk: audmux_mclk {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x000b0
+			>;
+		};
+		pinctrl_emmc_reset: emmc_reset {
+			fsl,pins = <
+				/* eMMC reset, leave it alone */
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08 PAD_CTRL_PU_22k
+			>;
+		};
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			>;
+		};
+		pinctrl_enet_ctrl: enet_ctrlgrp {
+			fsl,pins = <
+				/* ENET phy reset */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 PAD_CTRL_NO
+				/* ENET phy interrupt */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 PAD_CTRL_HYS_PU
+			>;
+		};
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+		pinctrl_ipu2_vdac: ipu2vdacgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xD1
+				MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xD1
+				MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xD1
+				MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xD1
+				MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xF9
+				MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xF9
+				MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xF9
+				MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xF9
+				MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xF9
+				MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xF9
+				MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xF9
+				MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xF9
+				MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xF9
+				MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xF9
+				MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xF9
+				MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xF9
+				MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xF9
+				MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xF9
+				MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xF9
+				MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xF9
+			>;
+		};
+		pinctrl_regulator_usbhub_pwr: gpio_regulator_usbhub_pwr {
+			fsl,pins = <
+				/* USBH_HUB_EN */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28 PAD_CTRL_PU_22k
+				>;
+		};
+		pinctrl_reset_moci: gpio_reset_moci {
+			fsl,pins = <
+				/* RESET_MOCI control */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 PAD_CTRL_PU_22k
+				>;
+		};
+		pinctrl_touch_int: touch_intgrp {
+			fsl,pins = <
+				/* STMPE811 interrupt */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10 PAD_CTRL_HYS_PU
+			>;
+		};
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			>;
+		};
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { /* 100Mhz */
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
+			>;
+		};
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { /* 200Mhz */
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
+			>;
+		};
+	};
+
+	ipu1 {
+		pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+				MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61 /* DE */
+				MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61 /* HSync */
+				MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61 /* VSync */
+				MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+				MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+				MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+				MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+				MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+				MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+				MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+				MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+				MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+				MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+				MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+				MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+				MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+				MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+				MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+				MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+				MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+				MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+				MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+				MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+				MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+				MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+				MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+				MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+			>;
+		};
+		pinctrl_cam_mclk: cam_mclk {
+			fsl,pins = <
+				/* CAM sys_mclk */
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+			>;
+		};
+		pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+			>;
+		};
+	};
+
+	pwm {
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+			>;
+		};
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+			>;
+		};
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+			>;
+		};
+	};
+
+	spdif {
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+				MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+			>;
+		};
+	};
+
+	uart1 {
+		pinctrl_uart1_dce: uart1-dcegrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+			>;
+		};
+
+		/* DTE mode */
+		pinctrl_uart1_dte: uart1-dtegrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+				MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+				MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+			>;
+		};
+
+		/* Additional DTR, DSR, DCD */
+		pinctrl_uart1_ctrl: uart1-ctrlgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+				MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+				MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+			>;
+		};
+	};
+
+	uart2 {
+		pinctrl_uart2_dce: uart2-dcegrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA   0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA   0x1b0b1
+			>;
+		};
+
+		/* DTE mode */
+		pinctrl_uart2_dte: uart2grp-dte {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA   0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA   0x1b0b1
+				MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
+				MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
+			>;
+		};
+	};
+
+	uart4 {
+		pinctrl_uart4_dce: uart4-dcegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+			>;
+		};
+
+		/* DTE mode */
+		pinctrl_uart4_dte: uart4-dtegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+			>;
+		};
+	};
+
+	uart5 {
+		pinctrl_uart5_dce: uart5-dcegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+			>;
+		};
+
+		/* DTE mode */
+		pinctrl_uart5_dte: uart5-dtegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+			>;
+		};
+	};
+
+	usbh {
+		pinctrl_regulator_usbh_pwr: gpio_regulator_usbh_pwr {
+			fsl,pins = <
+				/* USBH_EN */
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00 PAD_CTRL_PU_22k
+				>;
+		};
+	};
+
+	usbotg {
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+		pinctrl_regulator_usbotg_pwr: gpio_regulator_usbotg_pwr {
+			fsl,pins = <
+				/* USBO power en */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 PAD_CTRL_PU_22k
+				>;
+		};
+	};
+
+	usdhc {
+		pinctrl_mmc_cd: gpio_mmc_cd {
+			fsl,pins = <
+				 /* MMC1 CD */
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 PAD_CTRL_NO
+				>;
+		};
+		pinctrl_sd_cd: gpio_sd_cd {
+			fsl,pins = <
+				/* SD1 CD */
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 PAD_CTRL_NO
+				>;
+		};
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+				MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+				MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+				MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+				MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+			>;
+		};
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	ipu_id = <1>;
+	disp_id = <1>;
+	ext_ref = <1>;
+	mode = "spl1";
+	sec_ipu_id = <1>;
+	sec_disp_id = <0>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+#ifndef USE_UART_IN_DCE_MODE
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+#else
+	pinctrl-0 = <&pinctrl_uart1_dce>;
+#endif
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+#ifndef USE_UART_IN_DCE_MODE
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+#else
+	pinctrl-0 = <&pinctrl_uart2_dce>;
+#endif
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+#ifndef USE_UART_IN_DCE_MODE
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	fsl,dte-mode;
+#else
+	pinctrl-0 = <&pinctrl_uart4_dce>;
+#endif
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+#ifndef USE_UART_IN_DCE_MODE
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	fsl,dte-mode;
+#else
+	pinctrl-0 = <&pinctrl_uart5_dce>;
+#endif
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	label = "MMC1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	label = "SD1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled"; /* weim signals not accessible on i.MX6 */
+};
-- 
1.7.9.5

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Lucas Stach]

Hi Petr,

Am Donnerstag, den 19.11.2015, 13:24 +0100 schrieb Petr ?tetiar:
> Signed-off-by: Petr ?tetiar <ynezz@true.cz>
> ---
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi |  951 +++++++++++++++++++++++++++++++++
>  1 file changed, 951 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6qdl-apalis.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> new file mode 100644
> index 0000000..610d844
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -0,0 +1,951 @@
> +/*
> + * Copyright 2014-2015 Toradex AG
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "Toradex Apalis iMX6Q Module";
> +	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm4 0 5000000>;
> +		status = "disabled";
> +	};
> +
> +	clocks {
> +		clk24m: clk24m {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
> +	i2cddc: i2c at 0 {
> +		compatible = "i2c-gpio";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_i2c_ddc>;
> +		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> +			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> +			>;
> +		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
> +		#address-cells = <1>;
> +		#size-cells = <0>;

You are most likely not going to attach devices to this bus, so the
above 2 properties are not needed.

> +		status = "okay";
> +	};
> +
> +	memory {
> +		reg = <0x10000000 0x80000000>;
> +	};

The memory node is typically located at the top of the DT, but that's
just nitpicking.

> +
> +	regulators {
> +		compatible = "simple-bus";
> +
Get rid of this simple bus. It's not there in hardware and regulators
are board level components just like the nodes above and below.

> +		reg_1p8v: 1p8v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "1P8V";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_2p5v: 2p5v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "2P5V";
> +			regulator-min-microvolt = <2500000>;
> +			regulator-max-microvolt = <2500000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_3p3v: 3p3v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "3P3V";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_usb_otg_vbus: usb_otg_vbus {
> +			compatible = "regulator-fixed";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
> +			regulator-name = "usb_otg_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +			status = "disabled";
> +		};
> +
> +		/* on module usb hub */
> +		reg_usb_host_vbus_hub: usb_host_vbus_hub {
> +			compatible = "regulator-fixed";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
> +			regulator-name = "usb_host_vbus_hub";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
> +			startup-delay-us = <2000>;
> +			enable-active-high;
> +			status = "okay";
> +		};
> +
> +		reg_usb_host_vbus: usb_host_vbus {
> +			compatible = "regulator-fixed";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
> +			regulator-name = "usb_host_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +			vin-supply = <&reg_usb_host_vbus_hub>;
> +			status = "disabled";
> +		};
> +	};
> +};
> +
> +&audmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux &pinctrl_audmux_mclk>;
> +	status = "okay";
> +};
> +
> +/* Apalis SPI1 */
> +&ecspi1 {
> +	fsl,spi-num-chipselects = <1>;
> +	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_spi_cs1>;
> +	status = "disabled";
> +};
> +
> +/* Apalis SPI2 */
> +&ecspi2 {
> +	fsl,spi-num-chipselects = <1>;
> +	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_spi_cs2>;
> +	status = "disabled";
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
> +	phy-mode = "rgmii";
> +	status = "okay";
> +
> +	#address-cells = <0>;
> +	#size-cells = <1>;
> +	phy_int {
> +		reg = <0x6>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
> +	};
I don't think that's the right way to describe a PHY with the mainline
kernel bindings.

> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "disabled";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	status = "disabled";
> +};
> +
> +/*
> + * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
> + * board)
> + */

This comment doesn't add any value. Remove.

> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "disabled";
> +};
> +
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	pmic: pfuze100 at 08 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +/*
> + * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
> + */

Remove.

> +&i2c3 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default", "recovery";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	pinctrl-1 = <&pinctrl_i2c3_recovery>;
> +	gpios = <&gpio3 18 GPIO_ACTIVE_HIGH /* sda */
> +		 &gpio3 17 GPIO_ACTIVE_HIGH /* scl */
> +		 >;

The mainline binding states that those need to be named as "scl-gpios"
and "sda-gpios". See Documentation/devicetree/bindings/i2c/i2c-imx.txt

> +	status = "disabled";
> +};
> +
> +/* PAD Ctrl values for common settings */
> +/* (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
> +#define PAD_CTRL_HYS_PU 0x1b0b0
> +
> +/* (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
> +#define PAD_CTRL_HYS_PD 0x130b0
> +
> +/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
> +#define PAD_CTRL_PU_22k 0x0f058
> +
I don't particularly like those defines. Maybe just replace by the hex
values?

> +#define PAD_CTRL_NO 0x80000000
> +
No pad control isn't okay for new DTs. Even if the pin should stay at
the hardware reset default, it must be explicitly set in the DT. Please
look up the defaults in the reference manual and replace any occurrence
of 0x80000000 with the real value.

> +&iomuxc {
> +	ecspi {
> +		pinctrl_ecspi1: ecspi1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
> +				MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
> +				MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
> +			>;
> +		};
> +		pinctrl_ecspi2: ecspi2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
> +				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
> +				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
> +			>;
> +		};
> +		pinctrl_spi_cs1: spi_cs1 {
> +			fsl,pins = <
> +				/* SPI1 cs */
> +				MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 PAD_CTRL_NO
> +				>;
> +		};
> +		pinctrl_spi_cs2: spi_cs2 {
> +			fsl,pins = <
> +				/* SPI2 cs */
> +				MX6QDL_PAD_EIM_RW__GPIO2_IO26 PAD_CTRL_NO
> +				>;
> +		};
> +	};
> +
> +	flexcan {
> +		pinctrl_flexcan1: flexcan1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX   0x80000000
> +				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX   0x80000000
> +			>;
> +		};
> +		pinctrl_flexcan2: flexcan2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
> +				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
> +			>;
> +		};
> +	};
> +
> +	gpio {
> +		pinctrl_apalis_gpio1: apalis_gpio1 {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_D4__GPIO2_IO04 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio2: apalis_gpio2 {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio3: apalis_gpio3 {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio4: apalis_gpio4 {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio5: apalis_gpio5 {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio6: apalis_gpio6 {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio7: apalis_gpio7 {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_apalis_gpio8: apalis_gpio8 {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_6__GPIO1_IO06 PAD_CTRL_HYS_PD
> +			>;
> +		};
> +		pinctrl_gpio_keys: gpio_keys {
> +			fsl,pins = <
> +				/* Power Button */
> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04 PAD_CTRL_HYS_PU
> +				>;
> +		};
> +	};
> +
> +	hdmi {
> +		pinctrl_hdmi_cec: hdmicecgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> +			>;
> +		};
> +	};
> +
> +	i2c {
> +		pinctrl_i2c_ddc: i2c_ddc {
> +			fsl,pins = <
> +				/* DDC bitbang */
> +				MX6QDL_PAD_EIM_EB2__GPIO2_IO30 PAD_CTRL_HYS_PU
> +				MX6QDL_PAD_EIM_D16__GPIO3_IO16 PAD_CTRL_HYS_PU
> +				>;
> +		};
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
> +				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
> +			>;
> +		};
> +		pinctrl_i2c3: i2c3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
> +				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
> +			>;
> +		};
> +		pinctrl_i2c3_recovery: i2c3-recoverygrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
> +				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
> +			>;
> +		};
> +	};
> +
> +	/* pins used on module */
> +	imx6q-apalis {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reset_moci &pinctrl_emmc_reset>;
> +		pinctrl_audmux: audmuxgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
> +				MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
> +				MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
> +				MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
> +			>;
> +		};
> +		pinctrl_audmux_mclk: audmux_mclk {
> +			fsl,pins = <
> +				/* SGTL5000 sys_mclk */
> +				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x000b0
> +			>;
> +		};
> +		pinctrl_emmc_reset: emmc_reset {
> +			fsl,pins = <
> +				/* eMMC reset, leave it alone */
> +				MX6QDL_PAD_SD3_RST__GPIO7_IO08 PAD_CTRL_PU_22k
> +			>;
> +		};
> +		pinctrl_enet: enetgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
> +				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
> +				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
> +				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
> +				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
> +				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
> +				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
> +				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> +				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
> +				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
> +				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> +			>;
> +		};
> +		pinctrl_enet_ctrl: enet_ctrlgrp {
> +			fsl,pins = <
> +				/* ENET phy reset */
> +				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 PAD_CTRL_NO
> +				/* ENET phy interrupt */
> +				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 PAD_CTRL_HYS_PU
> +			>;
> +		};
> +		pinctrl_i2c2: i2c2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> +				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> +			>;
> +		};
> +		pinctrl_ipu2_vdac: ipu2vdacgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xD1
> +				MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xD1
> +				MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xD1
> +				MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xD1
> +				MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xF9
> +				MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xF9
> +				MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xF9
> +				MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xF9
> +				MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xF9
> +				MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xF9
> +				MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xF9
> +				MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xF9
> +				MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xF9
> +				MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xF9
> +				MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xF9
> +				MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xF9
> +				MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xF9
> +				MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xF9
> +				MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xF9
> +				MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xF9

Lowercase for hex values, please.

> +			>;
> +		};
> +		pinctrl_regulator_usbhub_pwr: gpio_regulator_usbhub_pwr {
> +			fsl,pins = <
> +				/* USBH_HUB_EN */
> +				MX6QDL_PAD_EIM_D28__GPIO3_IO28 PAD_CTRL_PU_22k
> +				>;
> +		};
> +		pinctrl_reset_moci: gpio_reset_moci {
> +			fsl,pins = <
> +				/* RESET_MOCI control */
> +				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 PAD_CTRL_PU_22k
> +				>;
> +		};
> +		pinctrl_touch_int: touch_intgrp {
> +			fsl,pins = <
> +				/* STMPE811 interrupt */
> +				MX6QDL_PAD_KEY_COL2__GPIO4_IO10 PAD_CTRL_HYS_PU
> +			>;
> +		};
> +		pinctrl_usdhc3: usdhc3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> +			>;
> +		};
> +		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { /* 100Mhz */
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
> +			>;
> +		};
> +		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { /* 200Mhz */
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
> +			>;
> +		};
> +	};
> +
> +	ipu1 {
> +		pinctrl_ipu1_lcdif: ipu1lcdifgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
> +				MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61 /* DE */
> +				MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61 /* HSync */
> +				MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61 /* VSync */
> +				MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
> +				MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
> +				MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
> +				MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
> +				MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
> +				MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
> +				MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
> +				MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
> +				MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
> +				MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
> +				MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
> +				MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
> +				MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
> +				MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
> +				MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
> +				MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
> +				MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
> +				MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
> +				MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
> +				MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
> +				MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
> +				MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
> +				MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
> +				MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
> +			>;
> +		};
> +		pinctrl_cam_mclk: cam_mclk {
> +			fsl,pins = <
> +				/* CAM sys_mclk */
> +				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
> +			>;
> +		};
> +		pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
> +				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
> +				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
> +				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
> +				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
> +			>;
> +		};
> +	};
> +
> +	pwm {
> +		pinctrl_pwm1: pwm1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
> +			>;
> +		};
> +		pinctrl_pwm2: pwm2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
> +			>;
> +		};
> +		pinctrl_pwm3: pwm3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
> +			>;
> +		};
> +		pinctrl_pwm4: pwm4grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
> +			>;
> +		};
> +	};
> +
> +	spdif {
> +		pinctrl_spdif: spdifgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
> +				MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
> +			>;
> +		};
> +	};
> +
> +	uart1 {
> +		pinctrl_uart1_dce: uart1-dcegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> +				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> +			>;
> +		};
> +
> +		/* DTE mode */
> +		pinctrl_uart1_dte: uart1-dtegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
> +				MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
> +				MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
> +				MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
> +			>;
> +		};
> +
> +		/* Additional DTR, DSR, DCD */
> +		pinctrl_uart1_ctrl: uart1-ctrlgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
> +				MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
> +				MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
> +			>;
> +		};
> +	};
> +
> +	uart2 {
> +		pinctrl_uart2_dce: uart2-dcegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA   0x1b0b1
> +				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA   0x1b0b1
> +			>;
> +		};
> +
> +		/* DTE mode */
> +		pinctrl_uart2_dte: uart2grp-dte {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA   0x1b0b1
> +				MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA   0x1b0b1
> +				MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
> +				MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
> +			>;
> +		};
> +	};
> +
> +	uart4 {
> +		pinctrl_uart4_dce: uart4-dcegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> +				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> +			>;
> +		};
> +
> +		/* DTE mode */
> +		pinctrl_uart4_dte: uart4-dtegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
> +				MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
> +			>;
> +		};
> +	};
> +
> +	uart5 {
> +		pinctrl_uart5_dce: uart5-dcegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
> +				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
> +			>;
> +		};
> +
> +		/* DTE mode */
> +		pinctrl_uart5_dte: uart5-dtegrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
> +				MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
> +			>;
> +		};
> +	};
> +
> +	usbh {
> +		pinctrl_regulator_usbh_pwr: gpio_regulator_usbh_pwr {
> +			fsl,pins = <
> +				/* USBH_EN */
> +				MX6QDL_PAD_GPIO_0__GPIO1_IO00 PAD_CTRL_PU_22k
> +				>;
> +		};
> +	};
> +
> +	usbotg {
> +		pinctrl_usbotg: usbotggrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
> +			>;
> +		};
> +		pinctrl_regulator_usbotg_pwr: gpio_regulator_usbotg_pwr {
> +			fsl,pins = <
> +				/* USBO power en */
> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22 PAD_CTRL_PU_22k
> +				>;
> +		};
> +	};
> +
> +	usdhc {
> +		pinctrl_mmc_cd: gpio_mmc_cd {
> +			fsl,pins = <
> +				 /* MMC1 CD */
> +				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 PAD_CTRL_NO
> +				>;
> +		};
> +		pinctrl_sd_cd: gpio_sd_cd {
> +			fsl,pins = <
> +				/* SD1 CD */
> +				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 PAD_CTRL_NO
> +				>;
> +		};
> +		pinctrl_usdhc1: usdhc1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
> +				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
> +				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
> +				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
> +				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
> +				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
> +				MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
> +				MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
> +				MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
> +				MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
> +			>;
> +		};
> +		pinctrl_usdhc2: usdhc2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
> +				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> +			>;
> +		};
> +	};
> +};
> +
> +&ldb {
> +	ipu_id = <1>;
> +	disp_id = <1>;
> +	ext_ref = <1>;
> +	mode = "spl1";
> +	sec_ipu_id = <1>;
> +	sec_disp_id = <0>;

Those properties are not part of the mainline binding. Remove.

> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +	status = "disabled";
> +};
> +
> +&pwm2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm2>;
> +	status = "disabled";
> +};
> +
> +&pwm3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm3>;
> +	status = "disabled";
> +};
> +
> +&pwm4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm4>;
> +	status = "disabled";
> +};
> +
> +&spdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_spdif>;
> +	status = "disabled";
> +};
> +
> +&ssi1 {
> +	fsl,mode = "i2s-slave";
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +#ifndef USE_UART_IN_DCE_MODE
> +	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
> +	fsl,dte-mode;
> +	fsl,uart-has-rtscts;
> +#else
> +	pinctrl-0 = <&pinctrl_uart1_dce>;
> +#endif
> +	status = "disabled";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +#ifndef USE_UART_IN_DCE_MODE
> +	pinctrl-0 = <&pinctrl_uart2_dte>;
> +	fsl,dte-mode;
> +	fsl,uart-has-rtscts;
> +#else
> +	pinctrl-0 = <&pinctrl_uart2_dce>;
> +#endif
> +	status = "disabled";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +#ifndef USE_UART_IN_DCE_MODE
> +	pinctrl-0 = <&pinctrl_uart4_dte>;
> +	fsl,dte-mode;
> +#else
> +	pinctrl-0 = <&pinctrl_uart4_dce>;
> +#endif
> +	status = "disabled";
> +};
> +
> +&uart5 {
> +	pinctrl-names = "default";
> +#ifndef USE_UART_IN_DCE_MODE
> +	pinctrl-0 = <&pinctrl_uart5_dte>;
> +	fsl,dte-mode;
> +#else
> +	pinctrl-0 = <&pinctrl_uart5_dce>;
> +#endif
> +	status = "disabled";
> +};

Urgh, those ifdefs are really ugly, but probably nothing you can do
about that. Maybe you can just override the pinctrl from the top level
DT...

Were v1.0 modules sold to customers? If not the value of having those
supported by mainline is really limited.

> +
> +&usbh1 {
> +	vbus-supply = <&reg_usb_host_vbus>;
> +	status = "disabled";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	disable-over-current;
> +	status = "disabled";
> +};
> +
> +/* MMC1 */
> +&usdhc1 {
> +	label = "MMC1";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
> +	cd-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;

Probably active low.

> +	vmmc-supply = <&reg_3p3v>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	status = "disabled";
> +};
> +
> +/* SD1 */
> +&usdhc2 {
> +	label = "SD1";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
> +	cd-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;

Same as above.

> +	vmmc-supply = <&reg_3p3v>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	status = "disabled";
> +};
> +
> +/* eMMC */
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	vmmc-supply = <&reg_3p3v>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&weim {
> +	status = "disabled"; /* weim signals not accessible on i.MX6 */
> +};

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Joshua Clayton]

On Thursday, November 19, 2015 03:12:05 PM Lucas Stach wrote:
> > +
> > +/* PAD Ctrl values for common settings */
> > +/* (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
> > +#define PAD_CTRL_HYS_PU 0x1b0b0
> > +
> > +/* (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
> > +#define PAD_CTRL_HYS_PD 0x130b0
> > +
> > +/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
> > +#define PAD_CTRL_PU_22k 0x0f058
> > +
> I don't particularly like those defines. Maybe just replace by the hex
> values?
Hold on. Lets not throw the baby out with the bathwater.
These macros (or something similar) look much nicer than hex values that I
have to look up in the imx6 user manual over and over.

Seems like a genuine improvement to me,
except that they should not be in the dts itself.
Rather in arch/arm/boot/dts/imx6<num>-pinfunc.h, or another include file

What do you think?

> 
> > +#define PAD_CTRL_NO 0x80000000
> > +
> No pad control isn't okay for new DTs. Even if the pin should stay at
> the hardware reset default, it must be explicitly set in the DT. Please
> look up the defaults in the reference manual and replace any occurrence
> of 0x80000000 with the real value.
> 
Not sure about this one since we actively discourage 0x80000000

-- 
~Joshua Clayton

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Fabio Estevam]

On Thu, Nov 19, 2015 at 2:59 PM, Joshua Clayton
<stillcompiling@gmail.com> wrote:
> On Thursday, November 19, 2015 03:12:05 PM Lucas Stach wrote:
>> > +
>> > +/* PAD Ctrl values for common settings */
>> > +/* (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
>> > +#define PAD_CTRL_HYS_PU 0x1b0b0
>> > +
>> > +/* (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
>> > +#define PAD_CTRL_HYS_PD 0x130b0
>> > +
>> > +/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
>> > +#define PAD_CTRL_PU_22k 0x0f058
>> > +
>> I don't particularly like those defines. Maybe just replace by the hex
>> values?
> Hold on. Lets not throw the baby out with the bathwater.
> These macros (or something similar) look much nicer than hex values that I
> have to look up in the imx6 user manual over and over.
>
> Seems like a genuine improvement to me,
> except that they should not be in the dts itself.
> Rather in arch/arm/boot/dts/imx6<num>-pinfunc.h, or another include file
>
> What do you think?

Seems like a good idea to me.

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Petr Štetiar]

Joshua Clayton <stillcompiling@gmail.com> [2015-11-19 08:59:34]:

> On Thursday, November 19, 2015 03:12:05 PM Lucas Stach wrote:
> > > +
> > > +/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
> > > +#define PAD_CTRL_PU_22k 0x0f058
> > > +
> > I don't particularly like those defines. Maybe just replace by the hex
> > values?
>
> Seems like a genuine improvement to me,
> except that they should not be in the dts itself.
> Rather in arch/arm/boot/dts/imx6<num>-pinfunc.h, or another include file

Ok, so how should it look like? Define bit fields and then register content?
Something like:

  #define PAD_CTL_PUS_22K_UP              (3 << 14)
  #define PAD_CTL_PUE                     (1 << 13)
  #define PAD_CTL_PKE                     (1 << 12)
  #define PAD_CTL_SPEED_LOW               (1 << 6)
  #define PAD_CTL_DSE_80ohm               (3 << 3)

  #define PAD_CTRL_PU_22k PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | 
                   PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm

or just register value with a comment:

  /* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
  #define PAD_CTRL_PU_22k 0x0f058

-- ynezz

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Joshua Clayton]

On Fri, 20 Nov 2015 11:40:17 +0100
Petr ?tetiar <ynezz@true.cz> wrote:

> Joshua Clayton <stillcompiling@gmail.com> [2015-11-19 08:59:34]:
> 
> > On Thursday, November 19, 2015 03:12:05 PM Lucas Stach wrote:
> > > > +
> > > > +/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE |
> > > > PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */ +#define
> > > > PAD_CTRL_PU_22k 0x0f058 +
> > > I don't particularly like those defines. Maybe just replace by
> > > the hex values?
> >
> > Seems like a genuine improvement to me,
> > except that they should not be in the dts itself.
> > Rather in arch/arm/boot/dts/imx6<num>-pinfunc.h, or another include
> > file
> 
> Ok, so how should it look like? Define bit fields and then register
> content? Something like:
> 
>   #define PAD_CTL_PUS_22K_UP              (3 << 14)
>   #define PAD_CTL_PUE                     (1 << 13)
>   #define PAD_CTL_PKE                     (1 << 12)
>   #define PAD_CTL_SPEED_LOW               (1 << 6)
>   #define PAD_CTL_DSE_80ohm               (3 << 3)
> 
Just noticed that these bits are already defined in
arch/arm/mach-imx/iomux-v3.h I'm not super familiar with dts.
Is there a good place for
them that is acceptable for both devicetree and other kernel
use?
Something like include/dt-bindings/pinctrl/iomux-v3.h ?

>   #define PAD_CTRL_PU_22k PAD_CTL_PUS_22K_UP | PAD_CTL_PUE |
> PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm
> 
This one.
Its almost always better to convey the meaning in the data
than with a separate comment.
 
> or just register value with a comment:
> 
>   /* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE |
> PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */ #define PAD_CTRL_PU_22k
> 0x0f058
> 
> -- ynezz

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Petr Štetiar]

Lucas Stach <l.stach@pengutronix.de> [2015-11-19 15:12:05]:

> Hi Petr,

Hi,

> > +&fec {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
> > +	phy-mode = "rgmii";
> > +	status = "okay";
> > +
> > +	#address-cells = <0>;
> > +	#size-cells = <1>;
> > +	phy_int {
> > +		reg = <0x6>;
> > +		interrupt-parent = <&gpio1>;
> > +		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
> > +	};
>
> I don't think that's the right way to describe a PHY with the mainline
> kernel bindings.

I'm quite stuck here as I don't have schematics of that SOM, so I don't know
how the PHY is connected to the i.MX6. I've asked Toradex about the details,
but they've just replied with "These signals connect to the on module Ethernet
PHY.", which isn't much helpful :-) and gave me a link to the DTS[1] with a same
content.

So, I've simply tried to convert it to the mainline DTS:

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
	phy-mode = "rgmii";

	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
	interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_LOW>,
			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
	status = "okay";
};

but it doesn't work, the PHY isn't being initialized. Then I've tried
bruteforce method with all remaining combinations of high/low level types for
both reset and interrupt GPIOs, but without success. If I simply remove reset
and interrupt GPIO descriptions, then it boots, but I don't know if everything
is setup as it should be. Any ideas?

Thanks.

1. https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx6qdl-apalis.dtsi?h=colibri&id=Apalis_iMX6_LinuxImageV2.5Beta2_20151106#n278

-- ynezz

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Stefan Agner]

Hi Petr,

On 2015-11-26 02:17, Petr ?tetiar wrote:
> Lucas Stach <l.stach@pengutronix.de> [2015-11-19 15:12:05]:
>> > +&fec {
>> > +	pinctrl-names = "default";
>> > +	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
>> > +	phy-mode = "rgmii";
>> > +	status = "okay";
>> > +
>> > +	#address-cells = <0>;
>> > +	#size-cells = <1>;
>> > +	phy_int {
>> > +		reg = <0x6>;
>> > +		interrupt-parent = <&gpio1>;
>> > +		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
>> > +	};
>>
>> I don't think that's the right way to describe a PHY with the mainline
>> kernel bindings.
> 
> I'm quite stuck here as I don't have schematics of that SOM, so I don't know
> how the PHY is connected to the i.MX6. I've asked Toradex about the details,
> but they've just replied with "These signals connect to the on module Ethernet
> PHY.", which isn't much helpful :-) and gave me a link to the DTS[1] with a same
> content.
> 
> So, I've simply tried to convert it to the mainline DTS:
> 
> &fec {
> 	pinctrl-names = "default";
> 	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
> 	phy-mode = "rgmii";
> 
> 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
> 	interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_LOW>,
> 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> 	status = "okay";
> };

According to the schema, &gpio1 30 is low active as well as the reset
GPIO &gpio1 25. Both pulled high externally...

So phy reset GPIO should be ACTIVE_LOW, otherwise things look correct to
me.

> but it doesn't work, the PHY isn't being initialized. Then I've tried
> bruteforce method with all remaining combinations of high/low level types for
> both reset and interrupt GPIOs, but without success. If I simply remove reset
> and interrupt GPIO descriptions, then it boots, but I don't know if everything
> is setup as it should be. Any ideas?

I guess in that case U-Boot took care of it. However, this is not a
clean solution...

Not sure what happens exactly, maybe the phy-reset does not honor the
GPIO_ACTIVE_LOW flag?

Maybe also check the reset pad control, I guess you need to set
something different here anyway.
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 PAD_CTRL_NO

In case that does not help, I can have a look here what is going on next
week.

--
Stefan

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Petr Štetiar]

Stefan Agner <stefan@agner.ch> [2015-11-27 12:02:46]:

> Hi Petr,

Hi,

> > &fec {
> > 	pinctrl-names = "default";
> > 	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
> > 	phy-mode = "rgmii";
> > 
> > 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
> > 	interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_LOW>,
> > 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> > 	status = "okay";
> > };
> 
> According to the schema, &gpio1 30 is low active as well as the reset
> GPIO &gpio1 25. Both pulled high externally...
> 
> So phy reset GPIO should be ACTIVE_LOW, otherwise things look correct to
> me.
> 
> I guess in that case U-Boot took care of it. However, this is not a
> clean solution...

Yes, I think, that it's being setup by U-Boot and there is something not
properly(*) defined in the DTS or in kernel. I'll probably start over with a
vanilla U-Boot to get relatively clean table.

* If I boot Toradex's 3.10.17+gitr602505a35 first and then reboot into
  4.4.0-rc2, the kernel hangs somewhere in the platform init. It's probably
  the PAD_CTRL_NO problem. I'll get into this once I fix the fec.

> Not sure what happens exactly, maybe the phy-reset does not honor the
> GPIO_ACTIVE_LOW flag?

Reset works probably fine, I haven't verified that with a scope, but if I boot
over NFS, it takes longer then without reset-gpio defined.

The issue is with IRQ GPIO, which I can't get to work. Here are two cases I've
observed so far:

1. PHY init failure due to MDIO read timeout

  interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_LOW>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

  [    2.685556] of_irq_parse_raw:  /soc/aips-bus at 02000000/gpio at 0209c000:0000001e,00000008
  [    2.701521] of_irq_parse_raw:  /interrupt-controller at 00a01000:00000000,00000077,00000004
  [    2.732258] fec 2188000.ethernet (unnamed net_device) (uninitialized): MDIO read timeout
  [    2.740859] fec: probe of 2188000.ethernet failed with error -5

2. PHY init is OK, but MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 is not being used as IRQ:

  interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_LOW>, <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>;

  [    2.685479] of_irq_parse_raw:  /soc/aips-bus at 02000000/gpio at 0209c000:0000001e,00000008
  [    2.701440] of_irq_parse_raw:  /interrupt-controller at 00a01000:00000000,00000076,00000004
  [    2.714595] libphy: fec_enet_mii_bus: probed
  [    2.719674] fec 2188000.ethernet eth0: registered PHC device 0

  root at OpenWrt:/# cat /proc/interrupts | grep ethernet
   65:          0          0          0          0  gpio-mxc  30 Level     2188000.ethernet
  288:       7513          0          0          0       GIC 150 Level     2188000.ethernet

I've to look into it deeper next week. Thanks!

-- ynezz

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Stefan Agner]

Hi Petr,

Thanks for pushing this! It is on my todo list, but never came around...
[I do work for Toradex]

And thanks Lucas for reviewing it!


On 2015-11-19 06:12, Lucas Stach wrote:
> Hi Petr,
> 
> Am Donnerstag, den 19.11.2015, 13:24 +0100 schrieb Petr ?tetiar:
>> Signed-off-by: Petr ?tetiar <ynezz@true.cz>
>> ---
>>  arch/arm/boot/dts/imx6qdl-apalis.dtsi |  951 +++++++++++++++++++++++++++++++++
>>  1 file changed, 951 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/imx6qdl-apalis.dtsi
>>
>> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
>> new file mode 100644
>> index 0000000..610d844
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
>> @@ -0,0 +1,951 @@
>> +/*
>> + * Copyright 2014-2015 Toradex AG
>> + * Copyright 2012 Freescale Semiconductor, Inc.
>> + * Copyright 2011 Linaro Ltd.
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html

New device trees typically come with a dual license, X11/GPL. It makes
sense that we use that too, Toradex agrees...

>> + */
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> +	model = "Toradex Apalis iMX6Q Module";
>> +	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
>> +
>> +	backlight: backlight {
>> +		compatible = "pwm-backlight";
>> +		pwms = <&pwm4 0 5000000>;
>> +		status = "disabled";
>> +	};
>> +
>> +	clocks {
>> +		clk24m: clk24m {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +			clock-frequency = <24000000>;
>> +		};
>> +	};


There is a 24Mhz osc defined in imx6qdl.dtsi, but I think that is the
internal osc? I am not entierly familar with the i.MX6 clocks...

However, this seems not to be used anywhere and other boards also do not
define that clock, hence I would drop it.

>> +
>> +	i2cddc: i2c at 0 {
>> +		compatible = "i2c-gpio";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_i2c_ddc>;
>> +		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
>> +			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
>> +			>;
>> +		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
> 
> You are most likely not going to attach devices to this bus, so the
> above 2 properties are not needed.
> 
>> +		status = "okay";
>> +	};
>> +
>> +	memory {
>> +		reg = <0x10000000 0x80000000>;
>> +	};
> 
> The memory node is typically located at the top of the DT, but that's
> just nitpicking.
> 
>> +
>> +	regulators {
>> +		compatible = "simple-bus";
>> +
> Get rid of this simple bus. It's not there in hardware and regulators
> are board level components just like the nodes above and below.
> 
>> +		reg_1p8v: 1p8v {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "1P8V";
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		reg_2p5v: 2p5v {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "2P5V";
>> +			regulator-min-microvolt = <2500000>;
>> +			regulator-max-microvolt = <2500000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		reg_3p3v: 3p3v {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "3P3V";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		reg_usb_otg_vbus: usb_otg_vbus {
>> +			compatible = "regulator-fixed";
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
>> +			regulator-name = "usb_otg_vbus";
>> +			regulator-min-microvolt = <5000000>;
>> +			regulator-max-microvolt = <5000000>;
>> +			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +			status = "disabled";
>> +		};
>> +
>> +		/* on module usb hub */
>> +		reg_usb_host_vbus_hub: usb_host_vbus_hub {
>> +			compatible = "regulator-fixed";
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
>> +			regulator-name = "usb_host_vbus_hub";
>> +			regulator-min-microvolt = <5000000>;
>> +			regulator-max-microvolt = <5000000>;
>> +			gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
>> +			startup-delay-us = <2000>;
>> +			enable-active-high;
>> +			status = "okay";
>> +		};
>> +
>> +		reg_usb_host_vbus: usb_host_vbus {
>> +			compatible = "regulator-fixed";
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
>> +			regulator-name = "usb_host_vbus";
>> +			regulator-min-microvolt = <5000000>;
>> +			regulator-max-microvolt = <5000000>;
>> +			gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +			vin-supply = <&reg_usb_host_vbus_hub>;
>> +			status = "disabled";
>> +		};
>> +	};
>> +};
>> +
>> +&audmux {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_audmux &pinctrl_audmux_mclk>;
>> +	status = "okay";
>> +};
>> +
>> +/* Apalis SPI1 */
>> +&ecspi1 {
>> +	fsl,spi-num-chipselects = <1>;
>> +	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_spi_cs1>;
>> +	status = "disabled";
>> +};
>> +
>> +/* Apalis SPI2 */
>> +&ecspi2 {
>> +	fsl,spi-num-chipselects = <1>;
>> +	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_spi_cs2>;
>> +	status = "disabled";
>> +};
>> +
>> +&fec {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
>> +	phy-mode = "rgmii";
>> +	status = "okay";
>> +
>> +	#address-cells = <0>;
>> +	#size-cells = <1>;
>> +	phy_int {
>> +		reg = <0x6>;
>> +		interrupt-parent = <&gpio1>;
>> +		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
>> +	};
> I don't think that's the right way to describe a PHY with the mainline
> kernel bindings.
> 
>> +};
>> +
>> +&can1 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_flexcan1>;
>> +	status = "disabled";
>> +};
>> +
>> +&can2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_flexcan2>;
>> +	status = "disabled";
>> +};
>> +
>> +/*
>> + * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
>> + * board)
>> + */
> 
> This comment doesn't add any value. Remove.
> 
>> +&i2c1 {
>> +	clock-frequency = <100000>;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_i2c1>;
>> +	status = "disabled";
>> +};
>> +
>> +&i2c2 {
>> +	clock-frequency = <100000>;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_i2c2>;
>> +	status = "okay";
>> +
>> +	pmic: pfuze100 at 08 {
>> +		compatible = "fsl,pfuze100";
>> +		reg = <0x08>;
>> +
>> +		regulators {
>> +			sw1a_reg: sw1ab {
>> +				regulator-min-microvolt = <300000>;
>> +				regulator-max-microvolt = <1875000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +				regulator-ramp-delay = <6250>;
>> +			};
>> +
>> +			sw1c_reg: sw1c {
>> +				regulator-min-microvolt = <300000>;
>> +				regulator-max-microvolt = <1875000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +				regulator-ramp-delay = <6250>;
>> +			};
>> +
>> +			sw3a_reg: sw3a {
>> +				regulator-min-microvolt = <400000>;
>> +				regulator-max-microvolt = <1975000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			swbst_reg: swbst {
>> +				regulator-min-microvolt = <5000000>;
>> +				regulator-max-microvolt = <5150000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			snvs_reg: vsnvs {
>> +				regulator-min-microvolt = <1000000>;
>> +				regulator-max-microvolt = <3000000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vref_reg: vrefddr {
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen1_reg: vgen1 {
>> +				regulator-min-microvolt = <800000>;
>> +				regulator-max-microvolt = <1550000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen2_reg: vgen2 {
>> +				regulator-min-microvolt = <800000>;
>> +				regulator-max-microvolt = <1550000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen3_reg: vgen3 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen4_reg: vgen4 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen5_reg: vgen5 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen6_reg: vgen6 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +/*
>> + * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
>> + */
> 
> Remove.
> 
>> +&i2c3 {
>> +	clock-frequency = <100000>;
>> +	pinctrl-names = "default", "recovery";
>> +	pinctrl-0 = <&pinctrl_i2c3>;
>> +	pinctrl-1 = <&pinctrl_i2c3_recovery>;
>> +	gpios = <&gpio3 18 GPIO_ACTIVE_HIGH /* sda */
>> +		 &gpio3 17 GPIO_ACTIVE_HIGH /* scl */
>> +		 >;
> 
> The mainline binding states that those need to be named as "scl-gpios"
> and "sda-gpios". See Documentation/devicetree/bindings/i2c/i2c-imx.txt
> 
>> +	status = "disabled";
>> +};
>> +
>> +/* PAD Ctrl values for common settings */
>> +/* (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
>> +#define PAD_CTRL_HYS_PU 0x1b0b0
>> +
>> +/* (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) */
>> +#define PAD_CTRL_HYS_PD 0x130b0
>> +
>> +/* (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm) */
>> +#define PAD_CTRL_PU_22k 0x0f058
>> +
> I don't particularly like those defines. Maybe just replace by the hex
> values?
> 
>> +#define PAD_CTRL_NO 0x80000000
>> +
> No pad control isn't okay for new DTs. Even if the pin should stay at
> the hardware reset default, it must be explicitly set in the DT. Please
> look up the defaults in the reference manual and replace any occurrence
> of 0x80000000 with the real value.
> 
>> +&iomuxc {
>> +	ecspi {
>> +		pinctrl_ecspi1: ecspi1grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
>> +				MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
>> +				MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
>> +			>;
>> +		};
>> +		pinctrl_ecspi2: ecspi2grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
>> +				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
>> +				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
>> +			>;
>> +		};
>> +		pinctrl_spi_cs1: spi_cs1 {
>> +			fsl,pins = <
>> +				/* SPI1 cs */
>> +				MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 PAD_CTRL_NO
>> +				>;
>> +		};
>> +		pinctrl_spi_cs2: spi_cs2 {
>> +			fsl,pins = <
>> +				/* SPI2 cs */
>> +				MX6QDL_PAD_EIM_RW__GPIO2_IO26 PAD_CTRL_NO
>> +				>;
>> +		};
>> +	};
>> +
>> +	flexcan {
>> +		pinctrl_flexcan1: flexcan1grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX   0x80000000
>> +				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX   0x80000000
>> +			>;
>> +		};
>> +		pinctrl_flexcan2: flexcan2grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
>> +				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	gpio {
>> +		pinctrl_apalis_gpio1: apalis_gpio1 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_NANDF_D4__GPIO2_IO04 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio2: apalis_gpio2 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio3: apalis_gpio3 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio4: apalis_gpio4 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio5: apalis_gpio5 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio6: apalis_gpio6 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio7: apalis_gpio7 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_apalis_gpio8: apalis_gpio8 {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_GPIO_6__GPIO1_IO06 PAD_CTRL_HYS_PD
>> +			>;
>> +		};
>> +		pinctrl_gpio_keys: gpio_keys {
>> +			fsl,pins = <
>> +				/* Power Button */
>> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04 PAD_CTRL_HYS_PU
>> +				>;
>> +		};
>> +	};
>> +
>> +	hdmi {
>> +		pinctrl_hdmi_cec: hdmicecgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>> +			>;
>> +		};
>> +	};
>> +
>> +	i2c {
>> +		pinctrl_i2c_ddc: i2c_ddc {
>> +			fsl,pins = <
>> +				/* DDC bitbang */
>> +				MX6QDL_PAD_EIM_EB2__GPIO2_IO30 PAD_CTRL_HYS_PU
>> +				MX6QDL_PAD_EIM_D16__GPIO3_IO16 PAD_CTRL_HYS_PU
>> +				>;
>> +		};
>> +		pinctrl_i2c1: i2c1grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
>> +				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>> +			>;
>> +		};
>> +		pinctrl_i2c3: i2c3grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
>> +				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>> +			>;
>> +		};
>> +		pinctrl_i2c3_recovery: i2c3-recoverygrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
>> +				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	/* pins used on module */
>> +	imx6q-apalis {
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_reset_moci &pinctrl_emmc_reset>;
>> +		pinctrl_audmux: audmuxgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
>> +				MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
>> +				MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
>> +				MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
>> +			>;
>> +		};
>> +		pinctrl_audmux_mclk: audmux_mclk {
>> +			fsl,pins = <
>> +				/* SGTL5000 sys_mclk */
>> +				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x000b0
>> +			>;
>> +		};
>> +		pinctrl_emmc_reset: emmc_reset {
>> +			fsl,pins = <
>> +				/* eMMC reset, leave it alone */
>> +				MX6QDL_PAD_SD3_RST__GPIO7_IO08 PAD_CTRL_PU_22k
>> +			>;
>> +		};
>> +		pinctrl_enet: enetgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
>> +				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
>> +				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
>> +				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
>> +				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
>> +				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
>> +				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
>> +				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
>> +				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
>> +				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
>> +			>;
>> +		};
>> +		pinctrl_enet_ctrl: enet_ctrlgrp {
>> +			fsl,pins = <
>> +				/* ENET phy reset */
>> +				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 PAD_CTRL_NO
>> +				/* ENET phy interrupt */
>> +				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 PAD_CTRL_HYS_PU
>> +			>;
>> +		};
>> +		pinctrl_i2c2: i2c2grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
>> +				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>> +			>;
>> +		};
>> +		pinctrl_ipu2_vdac: ipu2vdacgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xD1
>> +				MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xD1
>> +				MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xD1
>> +				MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xD1
>> +				MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xF9
>> +				MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xF9
>> +				MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xF9
>> +				MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xF9
>> +				MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xF9
>> +				MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xF9
>> +				MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xF9
>> +				MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xF9
>> +				MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xF9
>> +				MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xF9
>> +				MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xF9
>> +				MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xF9
>> +				MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xF9
>> +				MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xF9
>> +				MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xF9
>> +				MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xF9
> 
> Lowercase for hex values, please.
> 
>> +			>;
>> +		};
>> +		pinctrl_regulator_usbhub_pwr: gpio_regulator_usbhub_pwr {
>> +			fsl,pins = <
>> +				/* USBH_HUB_EN */
>> +				MX6QDL_PAD_EIM_D28__GPIO3_IO28 PAD_CTRL_PU_22k
>> +				>;
>> +		};
>> +		pinctrl_reset_moci: gpio_reset_moci {
>> +			fsl,pins = <
>> +				/* RESET_MOCI control */
>> +				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 PAD_CTRL_PU_22k
>> +				>;
>> +		};
>> +		pinctrl_touch_int: touch_intgrp {
>> +			fsl,pins = <
>> +				/* STMPE811 interrupt */
>> +				MX6QDL_PAD_KEY_COL2__GPIO4_IO10 PAD_CTRL_HYS_PU
>> +			>;
>> +		};
>> +		pinctrl_usdhc3: usdhc3grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
>> +				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
>> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
>> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
>> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
>> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
>> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
>> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
>> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>> +			>;
>> +		};
>> +		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { /* 100Mhz */
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
>> +				MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
>> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
>> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
>> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
>> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
>> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
>> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
>> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
>> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
>> +			>;
>> +		};
>> +		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { /* 200Mhz */
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
>> +				MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
>> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
>> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
>> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
>> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
>> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
>> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
>> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
>> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
>> +			>;
>> +		};
>> +	};
>> +
>> +	ipu1 {
>> +		pinctrl_ipu1_lcdif: ipu1lcdifgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
>> +				MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61 /* DE */
>> +				MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61 /* HSync */
>> +				MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61 /* VSync */
>> +				MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
>> +				MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
>> +				MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
>> +				MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
>> +				MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
>> +				MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
>> +				MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
>> +				MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
>> +				MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
>> +				MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
>> +				MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
>> +				MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
>> +				MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
>> +				MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
>> +				MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
>> +				MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
>> +				MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
>> +				MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
>> +				MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
>> +				MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
>> +				MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
>> +				MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
>> +				MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
>> +				MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
>> +			>;
>> +		};
>> +		pinctrl_cam_mclk: cam_mclk {
>> +			fsl,pins = <
>> +				/* CAM sys_mclk */
>> +				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
>> +			>;
>> +		};
>> +		pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
>> +				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
>> +				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
>> +				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
>> +				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	pwm {
>> +		pinctrl_pwm1: pwm1grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
>> +			>;
>> +		};
>> +		pinctrl_pwm2: pwm2grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
>> +			>;
>> +		};
>> +		pinctrl_pwm3: pwm3grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
>> +			>;
>> +		};
>> +		pinctrl_pwm4: pwm4grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	spdif {
>> +		pinctrl_spdif: spdifgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
>> +				MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
>> +			>;
>> +		};
>> +	};
>> +
>> +	uart1 {
>> +		pinctrl_uart1_dce: uart1-dcegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
>> +				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +
>> +		/* DTE mode */
>> +		pinctrl_uart1_dte: uart1-dtegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
>> +				MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
>> +				MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
>> +				MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
>> +			>;
>> +		};
>> +
>> +		/* Additional DTR, DSR, DCD */
>> +		pinctrl_uart1_ctrl: uart1-ctrlgrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
>> +				MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
>> +				MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
>> +			>;
>> +		};
>> +	};
>> +
>> +	uart2 {
>> +		pinctrl_uart2_dce: uart2-dcegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA   0x1b0b1
>> +				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA   0x1b0b1
>> +			>;
>> +		};
>> +
>> +		/* DTE mode */
>> +		pinctrl_uart2_dte: uart2grp-dte {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA   0x1b0b1
>> +				MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA   0x1b0b1
>> +				MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
>> +				MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	uart4 {
>> +		pinctrl_uart4_dce: uart4-dcegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
>> +				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +
>> +		/* DTE mode */
>> +		pinctrl_uart4_dte: uart4-dtegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
>> +				MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	uart5 {
>> +		pinctrl_uart5_dce: uart5-dcegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
>> +				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +
>> +		/* DTE mode */
>> +		pinctrl_uart5_dte: uart5-dtegrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
>> +				MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	usbh {
>> +		pinctrl_regulator_usbh_pwr: gpio_regulator_usbh_pwr {
>> +			fsl,pins = <
>> +				/* USBH_EN */
>> +				MX6QDL_PAD_GPIO_0__GPIO1_IO00 PAD_CTRL_PU_22k
>> +				>;
>> +		};
>> +	};
>> +
>> +	usbotg {
>> +		pinctrl_usbotg: usbotggrp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>> +			>;
>> +		};
>> +		pinctrl_regulator_usbotg_pwr: gpio_regulator_usbotg_pwr {
>> +			fsl,pins = <
>> +				/* USBO power en */
>> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22 PAD_CTRL_PU_22k
>> +				>;
>> +		};
>> +	};
>> +
>> +	usdhc {
>> +		pinctrl_mmc_cd: gpio_mmc_cd {
>> +			fsl,pins = <
>> +				 /* MMC1 CD */
>> +				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 PAD_CTRL_NO
>> +				>;
>> +		};
>> +		pinctrl_sd_cd: gpio_sd_cd {
>> +			fsl,pins = <
>> +				/* SD1 CD */
>> +				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 PAD_CTRL_NO
>> +				>;
>> +		};
>> +		pinctrl_usdhc1: usdhc1grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
>> +				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
>> +				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
>> +				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
>> +				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
>> +				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
>> +				MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
>> +				MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
>> +				MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
>> +				MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
>> +			>;
>> +		};
>> +		pinctrl_usdhc2: usdhc2grp {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
>> +				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
>> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
>> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
>> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
>> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
>> +			>;
>> +		};
>> +	};
>> +};
>> +
>> +&ldb {
>> +	ipu_id = <1>;
>> +	disp_id = <1>;
>> +	ext_ref = <1>;
>> +	mode = "spl1";
>> +	sec_ipu_id = <1>;
>> +	sec_disp_id = <0>;
> 
> Those properties are not part of the mainline binding. Remove.
> 
>> +	status = "okay";
>> +};
>> +
>> +&pwm1 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm1>;
>> +	status = "disabled";
>> +};
>> +
>> +&pwm2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm2>;
>> +	status = "disabled";
>> +};
>> +
>> +&pwm3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm3>;
>> +	status = "disabled";
>> +};
>> +
>> +&pwm4 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm4>;
>> +	status = "disabled";
>> +};
>> +
>> +&spdif {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_spdif>;
>> +	status = "disabled";
>> +};
>> +
>> +&ssi1 {
>> +	fsl,mode = "i2s-slave";
>> +	status = "okay";
>> +};
>> +
>> +&uart1 {
>> +	pinctrl-names = "default";
>> +#ifndef USE_UART_IN_DCE_MODE
>> +	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
>> +	fsl,dte-mode;
>> +	fsl,uart-has-rtscts;
>> +#else
>> +	pinctrl-0 = <&pinctrl_uart1_dce>;
>> +#endif
>> +	status = "disabled";
>> +};
>> +
>> +&uart2 {
>> +	pinctrl-names = "default";
>> +#ifndef USE_UART_IN_DCE_MODE
>> +	pinctrl-0 = <&pinctrl_uart2_dte>;
>> +	fsl,dte-mode;
>> +	fsl,uart-has-rtscts;
>> +#else
>> +	pinctrl-0 = <&pinctrl_uart2_dce>;
>> +#endif
>> +	status = "disabled";
>> +};
>> +
>> +&uart4 {
>> +	pinctrl-names = "default";
>> +#ifndef USE_UART_IN_DCE_MODE
>> +	pinctrl-0 = <&pinctrl_uart4_dte>;
>> +	fsl,dte-mode;
>> +#else
>> +	pinctrl-0 = <&pinctrl_uart4_dce>;
>> +#endif
>> +	status = "disabled";
>> +};
>> +
>> +&uart5 {
>> +	pinctrl-names = "default";
>> +#ifndef USE_UART_IN_DCE_MODE
>> +	pinctrl-0 = <&pinctrl_uart5_dte>;
>> +	fsl,dte-mode;
>> +#else
>> +	pinctrl-0 = <&pinctrl_uart5_dce>;
>> +#endif
>> +	status = "disabled";
>> +};
> 
> Urgh, those ifdefs are really ugly, but probably nothing you can do
> about that. Maybe you can just override the pinctrl from the top level
> DT...
> 
> Were v1.0 modules sold to customers? If not the value of having those
> supported by mainline is really limited.

Some have been made it to customers as early samples, however not that
many.

I am inclined to say lets not support them. They anyway lead to
headaches since you need to use a different U-Boot binary too...

Petr, do you happen to have one of them?

Otherwise I like the approach by overriding the pinctrl property in a 
arch/arm/boot/dts/imx6qdl-apalis_v1_0.dtsi...

Can we set fsl,dte-mode to false?

> 
>> +
>> +&usbh1 {
>> +	vbus-supply = <&reg_usb_host_vbus>;
>> +	status = "disabled";
>> +};
>> +
>> +&usbotg {
>> +	vbus-supply = <&reg_usb_otg_vbus>;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usbotg>;
>> +	disable-over-current;
>> +	status = "disabled";
>> +};
>> +
>> +/* MMC1 */
>> +&usdhc1 {
>> +	label = "MMC1";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
>> +	cd-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> 
> Probably active low.
> 

Yes...

>> +	vmmc-supply = <&reg_3p3v>;
>> +	bus-width = <8>;
>> +	no-1-8-v;
>> +	status = "disabled";
>> +};
>> +
>> +/* SD1 */
>> +&usdhc2 {
>> +	label = "SD1";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
>> +	cd-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
> 
> Same as above.
> 

Yes...

>> +	vmmc-supply = <&reg_3p3v>;
>> +	bus-width = <4>;
>> +	no-1-8-v;
>> +	status = "disabled";
>> +};
>> +
>> +/* eMMC */
>> +&usdhc3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usdhc3>;
>> +	vmmc-supply = <&reg_3p3v>;
>> +	bus-width = <8>;
>> +	no-1-8-v;
>> +	non-removable;
>> +	status = "okay";
>> +};
>> +
>> +&weim {
>> +	status = "disabled"; /* weim signals not accessible on i.MX6 */
>> +};


--
Stefan

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Petr Štetiar]

Stefan Agner <stefan@agner.ch> [2015-11-27 11:38:44]:

> >> + * Copyright 2014-2015 Toradex AG
> >> + * Copyright 2012 Freescale Semiconductor, Inc.
> >> + * Copyright 2011 Linaro Ltd.
> >> + *
> >> + * The code contained herein is licensed under the GNU General Public
> >> + * License. You may obtain a copy of the GNU General Public License
> >> + * Version 2 or later at the following locations:
> >> + *
> >> + * http://www.opensource.org/licenses/gpl-license.html
> >> + * http://www.gnu.org/copyleft/gpl.html
> 
> New device trees typically come with a dual license, X11/GPL. It makes
> sense that we use that too, Toradex agrees...

IANAL, but shouldn't we get some form of relicensing agreement from FSL and
Linaro also?

> >> +	clocks {
> >> +		clk24m: clk24m {
> >> +			compatible = "fixed-clock";
> >> +			#clock-cells = <0>;
> >> +			clock-frequency = <24000000>;
> >> +		};
> >> +	};
> 
> There is a 24Mhz osc defined in imx6qdl.dtsi, but I think that is the
> internal osc? I am not entierly familar with the i.MX6 clocks...
> 
> However, this seems not to be used anywhere and other boards also do not
> define that clock, hence I would drop it.

Ok, I'll try to drop it and will see if everything still works.

> > Were v1.0 modules sold to customers? If not the value of having those
> > supported by mainline is really limited.
> 
> I am inclined to say lets not support them. They anyway lead to
> headaches since you need to use a different U-Boot binary too...
> 
> Petr, do you happen to have one of them?

I've simply dropped support for v1.0 modules in patch v2. I've v1.1 module.

> Can we set fsl,dte-mode to false?

Ok, I'll remove that property.

-- ynezz

[PATCH 1/2] ARM: dts: imx6: Add support for Toradex Apalis SoM

[Lucas Stach]

Am Freitag, den 27.11.2015, 11:38 -0800 schrieb Stefan Agner:
> Hi Petr,
> 
> Thanks for pushing this! It is on my todo list, but never came around...
> [I do work for Toradex]
> 
> And thanks Lucas for reviewing it!
> 
> 
> On 2015-11-19 06:12, Lucas Stach wrote:
> > Hi Petr,
> > 
> > Am Donnerstag, den 19.11.2015, 13:24 +0100 schrieb Petr ?tetiar:
> >> Signed-off-by: Petr ?tetiar <ynezz@true.cz>
> >> ---
[...]
> >> +&uart1 {
> >> +	pinctrl-names = "default";
> >> +#ifndef USE_UART_IN_DCE_MODE
> >> +	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
> >> +	fsl,dte-mode;
> >> +	fsl,uart-has-rtscts;
> >> +#else
> >> +	pinctrl-0 = <&pinctrl_uart1_dce>;
> >> +#endif
> >> +	status = "disabled";
> >> +};
> >> +
> >> +&uart2 {
> >> +	pinctrl-names = "default";
> >> +#ifndef USE_UART_IN_DCE_MODE
> >> +	pinctrl-0 = <&pinctrl_uart2_dte>;
> >> +	fsl,dte-mode;
> >> +	fsl,uart-has-rtscts;
> >> +#else
> >> +	pinctrl-0 = <&pinctrl_uart2_dce>;
> >> +#endif
> >> +	status = "disabled";
> >> +};
> >> +
> >> +&uart4 {
> >> +	pinctrl-names = "default";
> >> +#ifndef USE_UART_IN_DCE_MODE
> >> +	pinctrl-0 = <&pinctrl_uart4_dte>;
> >> +	fsl,dte-mode;
> >> +#else
> >> +	pinctrl-0 = <&pinctrl_uart4_dce>;
> >> +#endif
> >> +	status = "disabled";
> >> +};
> >> +
> >> +&uart5 {
> >> +	pinctrl-names = "default";
> >> +#ifndef USE_UART_IN_DCE_MODE
> >> +	pinctrl-0 = <&pinctrl_uart5_dte>;
> >> +	fsl,dte-mode;
> >> +#else
> >> +	pinctrl-0 = <&pinctrl_uart5_dce>;
> >> +#endif
> >> +	status = "disabled";
> >> +};
> > 
> > Urgh, those ifdefs are really ugly, but probably nothing you can do
> > about that. Maybe you can just override the pinctrl from the top level
> > DT...
> > 
> > Were v1.0 modules sold to customers? If not the value of having those
> > supported by mainline is really limited.
> 
> Some have been made it to customers as early samples, however not that
> many.
> 
> I am inclined to say lets not support them. They anyway lead to
> headaches since you need to use a different U-Boot binary too...
> 
> Petr, do you happen to have one of them?
> 
> Otherwise I like the approach by overriding the pinctrl property in a 
> arch/arm/boot/dts/imx6qdl-apalis_v1_0.dtsi...
> 
> Can we set fsl,dte-mode to false?

You can remove those bool properties by using /delete-property/ in the
overriding DT.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

[PATCH 2/2] ARM: dts: imx6: Add support for Toradex Apalis Ixora board

[Petr Štetiar]

Signed-off-by: Petr ?tetiar <ynezz@true.cz>
---
 arch/arm/boot/dts/Makefile                    |    2 +
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |   25 +++
 arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts |   33 ++++
 arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi   |  211 +++++++++++++++++++++++++
 4 files changed, 271 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-apalis-ixora.dts
 create mode 100644 arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 992736b..623def6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -277,6 +277,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-udoo.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
+	imx6q-apalis-ixora.dtb \
+	imx6q-apalis_v1_0-ixora.dtb \
 	imx6q-arm2.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
new file mode 100644
index 0000000..cf1ef48
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2014-2015 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+#include "imx6qdl-apalis-ixora.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q on Apalis Ixora Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts b/arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts
new file mode 100644
index 0000000..6f69669
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis_v1_0-ixora.dts
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2014-2015 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+
+/*
+ * On HW V1.0 all RX/TX lines are routed in a DCE way, all control lines are
+ * then not routed as given in the module specification and thus unusable. The
+ * following define configures the UARTs to RX/TX correctly.
+ */
+#define USE_UART_IN_DCE_MODE
+
+#include "imx6qdl-apalis.dtsi"
+#include "imx6qdl-apalis-ixora.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q on Apalis Ixora Board v1.0";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi b/arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi
new file mode 100644
index 0000000..293e2ab
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis-ixora.dtsi
@@ -0,0 +1,211 @@
+/*
+ * Copyright 2014-2015 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2cddc;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc2 = &usdhc2; /* SD1  4bit slot */
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = "/soc/aips-bus at 02000000/snvs at 020cc000/snvs-rtc-lp at 34";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			label = "LED_4_GREEN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4-red {
+			label = "LED_4_RED";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-green {
+			label = "LED_5_GREEN";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-red {
+			label = "LED_5_RED";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		ledpwm1 {
+			label = "PWM1";
+			pwms = <&pwm1 0 50000>;
+			max-brightness = <255>;
+		};
+
+		ledpwm2 {
+			label = "PWM2";
+			pwms = <&pwm2 0 50000>;
+			max-brightness = <255>;
+		};
+
+		ledpwm3 {
+			label = "PWM3";
+			pwms = <&pwm3 0 50000>;
+			max-brightness = <255>;
+		};
+	};
+
+	regulators {
+		reg_usb_otg_vbus: usb_otg_vbus {
+			status = "okay";
+		};
+
+		reg_usb_host_vbus: usb_host_vbus {
+			status = "okay";
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	cat24c02 at 50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc at 68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	/*
+	 * Mux the Apalis GPIOs, GPIO7 used for PCIe reset,
+	 * GPIO5, 6 used by optional fusion_F0710A kernel module
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8>;
+
+	leds_ixora {
+		pinctrl_leds_ixora: leds-ixora {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 PAD_CTRL_HYS_PU
+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 PAD_CTRL_HYS_PU
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 PAD_CTRL_HYS_PU
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 PAD_CTRL_HYS_PU
+			>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	status = "okay";
+};
-- 
1.7.9.5