From: "Heiko Stübner" <heiko@sntech.de>
To: Jonas Karlman <jonas@kwiboo.se>
Cc: Mark Rutland <mark.rutland@arm.com>,
Algea Cao <algea.cao@rock-chips.com>,
David Airlie <airlied@linux.ie>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Sandy Huang <hjc@rock-chips.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
"linux-rockchip@lists.infradead.org"
<linux-rockchip@lists.infradead.org>,
Rob Herring <robh+dt@kernel.org>, Daniel Vetter <daniel@ffwll.ch>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Zheng Yang <zhengyang@rock-chips.com>
Subject: Re: [PATCH 15/15] phy/rockchip: inno-hdmi: Support more pre-pll configuration
Date: Mon, 06 Jan 2020 22:33:29 +0100 [thread overview]
Message-ID: <2769685.GCkjRackp1@diego> (raw)
In-Reply-To: <HE1PR06MB4011666845128FD3C89F9DACAC3C0@HE1PR06MB4011.eurprd06.prod.outlook.com>
Am Montag, 6. Januar 2020, 21:50:02 CET schrieb Jonas Karlman:
> From: Algea Cao <algea.cao@rock-chips.com>
>
> Adding the following freq cfg in 8-bit and 10-bit color depth:
>
> {
> 40000000, 65000000, 71000000, 83500000, 85750000,
> 88750000, 108000000, 119000000, 162000000
> }
>
> New freq has been validated by quantumdata 980.
>
> For some freq which can't be got by only using integer freq div,
> frac freq div is needed, Such as 88.75Mhz 10-bit. But The actual
> freq is different from the target freq, We must try to narrow
> the gap between them. RK322X only support integer freq div.
>
> The VCO of pre-PLL must be more than 2Ghz, otherwise PLL may be
> unlocked.
>
> Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Heiko Stuebner <heiko@sntech.de>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 74 ++++++++++++-------
> 1 file changed, 49 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
> index 3719309ad0d0..bb8bdf5e3301 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
> @@ -291,32 +291,56 @@ struct inno_hdmi_phy_drv_data {
> const struct phy_config *phy_cfg_table;
> };
>
> +/*
> + * If only using integer freq div can't get frequency we want, frac
> + * freq div is needed. For example, pclk 88.75 Mhz and tmdsclk
> + * 110.9375 Mhz must use frac div 0xF00000. The actual frequency is different
> + * from the target frequency. Such as the tmds clock 110.9375 Mhz,
> + * the actual tmds clock we get is 110.93719 Mhz. It is important
> + * to note that RK322X platforms do not support frac div.
> + */
> static const struct pre_pll_config pre_pll_cfg_table[] = {
> - { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
> - { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
> - { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
> - { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B},
> - { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
> - { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B},
> - { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0},
> - { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B},
> - { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
> - { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817},
> - { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0},
> - {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B},
> - {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
> - {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817},
> - {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0},
> - {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B},
> - {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
> - {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817},
> - {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0},
> - {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B},
> - {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0},
> - {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817},
> - {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0},
> - {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B},
> - {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
> + { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
> + { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
> + { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
> + { 40000000, 50000000, 1, 100, 2, 2, 2, 1, 0, 0, 15, 0, 0},
> + { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B},
> + { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
> + { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B},
> + { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0},
> + { 65000000, 65000000, 1, 130, 2, 2, 2, 1, 0, 0, 12, 0, 0},
> + { 65000000, 81250000, 3, 325, 0, 3, 3, 1, 0, 0, 10, 0, 0},
> + { 71000000, 71000000, 3, 284, 0, 3, 3, 1, 0, 0, 8, 0, 0},
> + { 71000000, 88750000, 3, 355, 0, 3, 3, 1, 0, 0, 10, 0, 0},
> + { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B},
> + { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
> + { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817},
> + { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0},
> + { 83500000, 83500000, 2, 167, 2, 1, 1, 1, 0, 0, 6, 0, 0},
> + { 83500000, 104375000, 1, 104, 2, 1, 1, 1, 1, 0, 5, 0, 0x600000},
> + { 85750000, 85750000, 3, 343, 0, 3, 3, 1, 0, 0, 8, 0, 0},
> + { 88750000, 88750000, 3, 355, 0, 3, 3, 1, 0, 0, 8, 0, 0},
> + { 88750000, 110937500, 1, 110, 2, 1, 1, 1, 1, 0, 5, 0, 0xF00000},
> + {108000000, 108000000, 1, 90, 3, 0, 0, 1, 0, 0, 5, 0, 0},
> + {108000000, 135000000, 1, 90, 0, 2, 2, 1, 0, 0, 5, 0, 0},
> + {119000000, 119000000, 1, 119, 2, 1, 1, 1, 0, 0, 6, 0, 0},
> + {119000000, 148750000, 1, 99, 0, 2, 2, 1, 0, 0, 5, 0, 0x2AAAAA},
> + {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B},
> + {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
> + {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817},
> + {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0},
> + {162000000, 162000000, 1, 108, 0, 2, 2, 1, 0, 0, 4, 0, 0},
> + {162000000, 202500000, 1, 135, 0, 2, 2, 1, 0, 0, 5, 0, 0},
> + {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B},
> + {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
> + {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817},
> + {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0},
> + {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B},
> + {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0},
> + {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817},
> + {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0},
> + {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B},
> + {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
> { /* sentinel */ }
> };
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-01-06 21:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 20:46 [PATCH 00/15] Support more HDMI modes on RK3228/RK3328 Jonas Karlman
2020-01-06 20:47 ` [PATCH 01/15] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
[not found] ` <20200106204723.5889-1-jonas@kwiboo.se>
2020-01-06 20:47 ` [PATCH 02/15] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate Jonas Karlman
2020-01-06 20:47 ` [PATCH 03/15] phy/rockchip: inno-hdmi: remove unused no_c from " Jonas Karlman
2020-01-06 20:47 ` [PATCH 04/15] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-01-06 20:48 ` [PATCH 05/15] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
[not found] ` <20200106204812.5944-1-jonas@kwiboo.se>
2020-01-06 20:48 ` [PATCH 06/15] drm/rockchip: vop: limit resolution width to 3840 Jonas Karlman
2020-01-06 21:18 ` Heiko Stübner
2020-01-06 21:34 ` Jonas Karlman
2020-01-06 20:48 ` [PATCH 07/15] drm/rockchip: dw-hdmi: allow high tmds bit rates Jonas Karlman
2020-01-06 20:48 ` [PATCH 08/15] drm/rockchip: dw-hdmi: require valid vpll clock rate on rk3228/rk3328 Jonas Karlman
2020-01-06 20:49 ` [PATCH 09/15] clk: rockchip: set parent rate for DCLK_VOP clock on rk3228 Jonas Karlman
[not found] ` <20200106204914.6001-1-jonas@kwiboo.se>
2020-01-06 20:49 ` [PATCH 10/15] arm64: dts: rockchip: increase vop clock rate on rk3328 Jonas Karlman
2020-01-06 20:49 ` [PATCH 11/15] arm64: dts: rockchip: add vpll clock to hdmi node " Jonas Karlman
2020-01-06 20:49 ` [PATCH 12/15] ARM: dts: rockchip: add vpll clock to hdmi node on rk3228 Jonas Karlman
2020-01-06 20:50 ` [PATCH 13/15] drm/rockchip: dw-hdmi: limit tmds to 340mhz on rk3228/rk3328 Jonas Karlman
[not found] ` <20200106204951.6060-1-jonas@kwiboo.se>
2020-01-06 20:50 ` [PATCH 14/15] drm/rockchip: dw-hdmi: remove unused plat_data " Jonas Karlman
2020-01-06 20:50 ` [PATCH 15/15] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
2020-01-06 21:33 ` Heiko Stübner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2769685.GCkjRackp1@diego \
--to=heiko@sntech.de \
--cc=airlied@linux.ie \
--cc=algea.cao@rock-chips.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hjc@rock-chips.com \
--cc=jonas@kwiboo.se \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=zhengyang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).