public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc: dw_mmc: use resource_size_t to store physical address
Date: Thu, 12 Nov 2015 15:14:23 +0100	[thread overview]
Message-ID: <28102387.ALpaBHpim0@wuerfel> (raw)

The dw_mmc driver stores the physical address of the MMIO registers
in a pointer, which requires the use of type casts, and is actually
broken if anyone ever has this device on a 32-bit SoC in registers
above 4GB. Gcc warns about this possibility when the driver is built
with ARM LPAE enabled:

mmc/host/dw_mmc.c: In function 'dw_mci_edmac_start_dma':
mmc/host/dw_mmc.c:702:17: warning: cast from pointer to integer of different size
  cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
                 ^
mmc/host/dw_mmc-pltfm.c: In function 'dw_mci_pltfm_register':
mmc/host/dw_mmc-pltfm.c:63:19: warning: cast to pointer from integer of different size
  host->phy_regs = (void *)(regs->start);

This changes the code to use resource_size_t, which gets rid of the
warning, the bug and the useless casts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
>From the arm64 allmodconfig build reports

diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 7e1d13b68b06..81bdeeb05a4d 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -60,7 +60,7 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	/* Get registers' physical base address */
-	host->phy_regs = (void *)(regs->start);
+	host->phy_regs = regs->start;
 	host->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(host->regs))
 		return PTR_ERR(host->regs);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7a6cedbe48a8..fb204ee6ff89 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -699,7 +699,7 @@ static int dw_mci_edmac_start_dma(struct dw_mci *host,
 	int ret = 0;
 
 	/* Set external dma config: burst size, burst width */
-	cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
+	cfg.dst_addr = host->phy_regs + fifo_offset;
 	cfg.src_addr = cfg.dst_addr;
 	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index f67b2ec18e6d..7776afb0ffa5 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -172,7 +172,7 @@ struct dw_mci {
 	/* For edmac */
 	struct dw_mci_dma_slave *dms;
 	/* Registers's physical base address */
-	void                    *phy_regs;
+	resource_size_t		phy_regs;
 
 	u32			cmd_status;
 	u32			data_status;

             reply	other threads:[~2015-11-12 14:14 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-12 14:14 Arnd Bergmann [this message]
2015-11-13  1:10 ` [PATCH] mmc: dw_mmc: use resource_size_t to store physical address Andy Shevchenko
2015-11-13  9:35   ` Arnd Bergmann
2015-11-18  0:13     ` Jaehoon Chung
2015-11-18  9:35     ` Andy Shevchenko
2015-11-18 12:38       ` Arnd Bergmann
2015-11-18 15:29         ` Andy Shevchenko
2015-11-18 15:45           ` Arnd Bergmann
2015-11-18 16:17             ` Andy Shevchenko
2015-11-18 16:22               ` Arnd Bergmann
2015-11-18 18:10                 ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28102387.ALpaBHpim0@wuerfel \
    --to=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox