Re: [Upstream] [PATCH 2/2] arm64: dts: freescale: Add PHYTEC phyBOARD-Nash-i.MX93 support

[Primoz Fiser <primoz.fiser@norik.com>]

Hi Wadim,

On 28. 04. 25 16:31, Wadim Egorov wrote:
> Hi Primoz,
> 
> a few of the node references you are adding are out of alphabetical order.

Only &mdio node is out of alphabetical order.

But this is done by choice to keep it together with &eqos node since
both nodes are related to the 2nd Ethernet interface (&ethphy2) and thus
kept logically with each other.

We did the same for phyBOARD-Segin-i.MX93.

> 
> Am 25.04.25 um 09:41 schrieb Primoz Fiser:
>> Add initial support for PHYTEC phyBOARD-Nash-i.MX93 board [1] based on
>> the PHYTEC phyCORE-i.MX93 SoM (System-on-Module) [2].
>>
>> Supported board features:
>>   * ADC
>>   * CAN
>>   * Ethernet 2x
>>   * EEPROM
>>   * eMMC
>>   * Heartbeat LED
>>   * RTC
> 
> eMMC and Hearbeat LED are not board features but SoM features.

That's true.

I will remove those from the list in v2 and only list carrier-board
features.

BR,
Primoz

> 
>>   * RS-232/RS-485
>>   * SD-card
>>   * TPM 2.0
>>   * USB
>>
>> For more details see the product pages for the development kit and the
>> SoM:
>>
>> [1] https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
>> [2]
>> https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
>>
>> Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
> 
> With that changed,
> 
> Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
> 

-- 
Primoz Fiser
phone: +386-41-390-545
email: primoz.fiser@norik.com
--
Norik systems d.o.o.
Your embedded software partner
Slovenia, EU
phone: +386-41-540-545
email: info@norik.com