linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: add rk3288-firefly-reload
Date: Mon, 18 Jul 2016 21:46:19 +0200	[thread overview]
Message-ID: <2868781.4x2gJCRbLH@diego> (raw)
In-Reply-To: <1468855952-2006-2-git-send-email-ayaka@soulik.info>

Am Montag, 18. Juli 2016, 23:32:32 schrieb Randy Li:
> The Firefly RK3288 Reload is a combination Firefly rk3288 core board
> with the Reload baseboard. Add a dtsi for the Firefly rk3288 core
> which can be included into the dts for the various baseboards
> in the future and dts for Reload base board.
> 
> Currently supported are serial console, wired networking, eMMC and
> SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only
> the OTG could work on the host mode now, the other USB host can't
> work now, additional patches are required.
> 
> Signed-off-by: Randy Li <ayaka@soulik.info>
> Acked-by: Rob Herring <robh@kernel.org>

applied [0], after some minor reordering - please double check.

Also, while the branch is named 4.8 this will only go into 4.9, as the merge-
window supposedly opens on the weekend.


Heiko

[0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=e00fdd4931ea4c47f53cba59b7a3800677546bea

  reply	other threads:[~2016-07-18 19:46 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-06 15:25 [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload ayaka
2016-07-06 15:25 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi ayaka
2016-07-06 15:25 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics ayaka
2016-07-06 16:13   ` Heiko Stuebner
2016-07-06 17:34     ` [PATCH 0/3] " Randy Li
2016-07-06 17:34       ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 17:34       ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:34       ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 17:52     ` [PATCH 0/3] Re:[PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:52       ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 17:52       ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:52       ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 18:06     ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 18:22     ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Randy Li
2016-07-06 18:22       ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 18:22       ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 18:23       ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-07 21:35       ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Heiko Stuebner
2016-07-09 15:42         ` ayaka
2016-07-09 23:06           ` Heiko Stuebner
2016-07-17 15:38             ` [PATCH] " Randy Li
2016-07-17 15:38               ` [PATCH] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-17 21:01                 ` Rob Herring
2016-07-18 11:24                 ` Heiko Stübner
2016-07-18 15:32                   ` [PATCH v2] " Randy Li
2016-07-18 15:32                     ` [PATCH] " Randy Li
2016-07-18 19:46                       ` Heiko Stübner [this message]
2016-08-07  3:40                         ` Shawn Lin
2016-08-07 14:44                           ` Heiko Stuebner
2016-08-08  2:29                             ` Shawn Lin
2016-08-09  9:28                             ` 陈豪
2016-08-09 10:02                               ` 陈豪
2016-08-09 10:06                                 ` Randy Li
2016-08-09 10:58                                   ` Heiko Stübner
2016-08-10  1:12                                     ` Randy Li
2016-08-14 11:27                                       ` [PATCH 0/2] ARM: dts: rockchip: correct the regulators in firefly reload Randy Li
2016-08-14 11:27                                         ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li
2016-08-14 12:30                                           ` Heiko Stuebner
2016-08-14 12:38                                             ` ayaka
2016-08-17 14:10                                               ` Heiko Stübner
2016-08-17 17:03                                                 ` [PATCH 0/2 v2] ARM: dts: rockchip: correct the regulators in " Randy Li
2016-08-17 17:03                                                   ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li
2016-08-18 13:35                                                     ` Heiko Stübner
2016-08-18 14:20                                                       ` ayaka
2016-08-17 17:03                                                   ` [PATCH 2/2] ARM: dts: rockchip: add missing regulators for firefly reload board Randy Li
2016-08-18 16:47                                                     ` Heiko Stübner
2016-08-14 11:27                                         ` Randy Li
2016-07-06 15:25 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload ayaka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2868781.4x2gJCRbLH@diego \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).