From mboxrd@z Thu Jan 1 00:00:00 1970 From: arnd@arndb.de (Arnd Bergmann) Date: Thu, 17 Dec 2015 21:11:43 +0100 Subject: [PATCH v3 0/4] Raspberry Pi power domains In-Reply-To: <878u4sx5gs.fsf@eliezer.anholt.net> References: <1450215622-27394-1-git-send-email-eric@anholt.net> <878u4sx5gs.fsf@eliezer.anholt.net> Message-ID: <2899341.Os5E8ounKE@wuerfel> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thursday 17 December 2015 11:03:47 Eric Anholt wrote: > >> > >> .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++ > >> arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 + > >> arch/arm/boot/dts/bcm2835.dtsi | 2 +- > >> arch/arm/mach-bcm/Kconfig | 10 + > >> arch/arm/mach-bcm/Makefile | 1 + > >> arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++ > >> include/dt-bindings/arm/raspberrypi-power.h | 41 ++++ > >> include/soc/bcm2835/raspberrypi-firmware.h | 2 + > >> 8 files changed, 360 insertions(+), 1 deletion(-) > >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt > >> create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c > >> create mode 100644 include/dt-bindings/arm/raspberrypi-power.h > >> > >> -- > >> 2.6.2 > >> > > > > Besides a nitpick for patch2, I would also reverse the order of patch3 > > and patch2. DT docs should go in before the actual parsing of the new > > bindings/compatibles. > > > > Anyway, for the hole series, you may add my: > > > > Reviewed-by: Ulf Hansson > > Would your tree be pulling the series (since it's power domains), or > should I (since it's SOC stuff)? > All of the above files go through the arm-soc tree by default. Arnd