From: alexandre.torgue@st.com (Alexandre Torgue)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] STM32 DT changes for v4.18 #1
Date: Fri, 4 May 2018 15:46:51 +0200 [thread overview]
Message-ID: <28c73dd0-fa87-83c1-5a93-217124e0f484@st.com> (raw)
Hi Arnd, Olof and Kevin,
Please consider this first round of STM32 DT updates for v4.18. As you
will see, main part of patches concerns support for STM32MP157 platform.
I didn't squash DT patches (as I like the way there are split) but let
me know if for next time you prefer I do it.
Regards
Alex
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
tags/stm32-dt-for-v4.18-1
for you to fetch changes up to 0a84a00094eea4080288f5c62aff8a90e510a252:
ARM: dts: stm32: update pwm-cells for LPTimer on stm32h743
(2018-05-04 09:45:54 +0200)
----------------------------------------------------------------
STM32 DT updates for v4.18, round 1
Highlights:
-----------
-MCU platforms updates:
-Update pwm-cells for stm32h743
-Add I2C support on stm32f7xx-disco boards and
on stm32h743i-eval board
-Add new stm32f469 dtsi file
-Add display support on stm32f469-disco (LTDC/DSI)
+ pannel orisetech (otm8009a)
-MPU STM32MP157 platform updates:
-Fix DTC (W=12) warnings
-Fix IRQ type definition for usart
-Add QSPI & NOR flash support on EV1 board
-Add CEC support
-Add USB host
-Add USBPHYC support and enable it on EV1 board
-Add LTDC and DSI support
-Add I2C support and enable it on ED1 and EV1 boards
-Add CRC support
-Add RNG support
-Add CRYP support
-Add DAC support
-Add LPTIMER support
-Add VREFBUFF support
-Add timers supports and enable timer trigger 6 on ED1 board
-Add MDMA, DMA and DMAMUX support and enable it
-Enable clock driver
----------------------------------------------------------------
Alexandre Torgue (2):
ARM: dts: stm32: Fix DTC warnings for stm32mp157
ARM: dts: stm32: Fix IRQ_TYPE_NONE warnings on stm32mp157c
Amelie Delaunay (4):
ARM: dts: stm32: add USBPHYC support to stm32mp157c
ARM: dts: stm32: add supplies to usbphyc ports on stm32mp157c-ed1
ARM: dts: stm32: enable USBPHYC on stm32mp157c-ev1
ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c
Fabrice Gasnier (8):
ARM: dts: stm32: add timers support to stm32mp157c
ARM: dts: stm32: add PWM pins used on stm32mp157c-ev1 board
ARM: dts: stm32: add PWM and triggers on stm32mp157c-ev1 board
ARM: dts: stm32: enable timer trigger 6 on stm32mp157c-ed1
ARM: dts: stm32: Add vrefbuf support to stm32mp157c
ARM: dts: stm32: Add LPtimer support to stm32mp157c
ARM: dts: stm32: Add DAC support to stm32mp157c
ARM: dts: stm32: update pwm-cells for LPTimer on stm32h743
Gabriel Fernandez (2):
ARM: dts: stm32: Enable stm32mp1 clock driver on stm32mp157c
ARM: dts: stm32: add reset binding on stm32mp157c
Lionel Debieve (4):
ARM: dts: stm32: Add RNG support on stm32mp157c
ARM: dts: stm32: Enable RNG for stm32mp157c-ed1
ARM: dts: stm32: Add CRYP support on stm32mp157c
ARM: dts: stm32: Add CRC support on stm32mp157c
Ludovic Barre (2):
ARM: dts: stm32: add qspi support for stm32mp157c
ARM: dts: stm32: add flash nor support on stm32mp157c eval board
Philippe CORNU (1):
ARM: dts: stm32: Add display support on stm32f469-disco
Philippe Cornu (2):
ARM: dts: stm32: Use gpio bindings in stm32f469-disco
ARM: dts: stm32: Add new stm32f469 dtsi file with mipi dsi
Pierre-Yves MORDRET (12):
ARM: dts: stm32: Add DMAv2 support on STM32MP157C
ARM: dts: stm32: Add DMAMUX support on STM32MP157C
ARM: dts: stm32: Add MDMA support on STM32MP157C
ARM: dts: stm32: Add STM32F7 I2C support for STM32MP157C SoC
ARM: dts: stm32: Add I2Cs pins used on STM32MP157C
ARM: dts: stm32: Add I2C4 support for STM32MP157C-ED1
ARM: dts: stm32: Add I2C2/5 support for STM32MP157C-EV1
ARM: dts: stm32: Append additional I2Cs for STM32F746 SoC
ARM: dts: stm32: Add I2C1 support for stm32f769-disco Board
ARM: dts: stm32: Add I2C1 support for stm32f746-disco Board
ARM: dts: stm32: Add I2C support for STM32H743 SoC
ARM: dts: stm32: Add I2C1 support for stm32h743i-eval Board
yannick fertre (5):
ARM: dts: stm32: add ltdc support on stm32mp157c
ARM: dts: stm32: add dsi support on stm32mp157c
ARM: dts: stm32: add cec support on stm32mp157c
ARM: dts: stm32: add cec pins to stm32mp157c
ARM: dts: stm32: add cec support on stm32mp157c-ev1
arch/arm/boot/dts/stm32f469-disco.dts | 53 ++-
arch/arm/boot/dts/stm32f469.dtsi | 19 +
arch/arm/boot/dts/stm32f746-disco.dts | 8 +
arch/arm/boot/dts/stm32f746.dtsi | 36 ++
arch/arm/boot/dts/stm32f769-disco.dts | 8 +
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 10 +
arch/arm/boot/dts/stm32h743.dtsi | 53 +++
arch/arm/boot/dts/stm32h743i-eval.dts | 8 +
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 151 ++++++-
arch/arm/boot/dts/stm32mp157c-ed1.dts | 57 ++-
arch/arm/boot/dts/stm32mp157c-ev1.dts | 87 ++++
arch/arm/boot/dts/stm32mp157c.dtsi | 720
++++++++++++++++++++++++++++--
12 files changed, 1152 insertions(+), 58 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32f469.dtsi
next reply other threads:[~2018-05-04 13:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-04 13:46 Alexandre Torgue [this message]
2018-05-14 8:18 ` [GIT PULL] STM32 DT changes for v4.18 #1 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28c73dd0-fa87-83c1-5a93-217124e0f484@st.com \
--to=alexandre.torgue@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox