Re: [RFC 4/4] drm/sun4i: Update mixer's internal registers after initialization

["Jernej Škrabec" <jernej.skrabec@siol.net>]

Hi!

Dne sobota, 28. december 2019 ob 21:28:18 CET je 
roman.stratiienko@globallogic.com napisal(a):
> From: Roman Stratiienko <roman.stratiienko@globallogic.com>
> 
> At system start blink of u-boot ghost framebuffer can be observed.
> Fix it.

Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>

Please note that U-Boot to Linux handover may not be without issues. I noticed 
that in some cases, HDMI EDID readout is broken. I guess already initialized 
HDMI controller doesn't like to be reinitialized. Or it may have something to 
do with the fact that U-Boot HDMI driver sets I2C timing and Linux kernel uses 
default one.

Best regards,
Jernej

> 
> Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
> ---
>  drivers/gpu/drm/sun4i/sun8i_mixer.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> b/drivers/gpu/drm/sun4i/sun8i_mixer.c index da84fccf7784..b906b8cc464e
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> @@ -588,6 +588,9 @@ static int sun8i_mixer_bind(struct device *dev, struct
> device *master, regmap_update_bits(mixer->engine.regs,
> SUN8I_MIXER_BLEND_PIPE_CTL(base), SUN8I_MIXER_BLEND_PIPE_CTL_EN_MSK, 0);
> 
> +	regmap_write(mixer->engine.regs, SUN8I_MIXER_GLOBAL_DBUFF,
> +		     SUN8I_MIXER_GLOBAL_DBUFF_ENABLE);
> +
>  	return 0;
> 
>  err_disable_bus_clk:





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel