public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@siol.net>
To: mripard@kernel.org, wens@csie.org,
	"Pablo Sebastián Greco" <pgreco@centosproject.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com, robh+dt@kernel.org,
	linux-arm-kernel@lists.infradead.org, icenowy@aosc.io
Subject: Re: [linux-sunxi] [PATCH] ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
Date: Mon, 24 Aug 2020 23:02:09 +0200	[thread overview]
Message-ID: <2982591.9ztLHtxLPI@jernej-laptop> (raw)
In-Reply-To: <a25ee214-5316-f6c8-53ce-676aa3c8a8ca@centosproject.org>

Dne ponedeljek, 24. avgust 2020 ob 22:54:01 CEST je Pablo Sebastián Greco 
napisal(a):
> On 24/8/20 16:36, Jernej Skrabec wrote:
> > DCDC1 regulator powers many different subsystems. While some of them can
> > work at 3.0 V, some of them can not. For example, VCC-HDMI can only work
> > between 3.24 V and 3.36 V. According to OS images provided by the board
> > manufacturer this regulator should be set to 3.3 V.
> > 
> > Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.
> > 
> > Fixes: da7ac948fa93 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2
> > 
> > 		      Ultra")
> > 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > ---
> > 
> >   arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 10 +++++-----
> >   1 file changed, 5 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> > b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index
> > 42d62d1ba1dc..ea15073f0c79 100644
> > --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> > +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> > @@ -223,16 +223,16 @@ &reg_aldo3 {
> > 
> >   };
> >   
> >   &reg_dc1sw {
> > 
> > -	regulator-min-microvolt = <3000000>;
> > -	regulator-max-microvolt = <3000000>;
> > +	regulator-min-microvolt = <3300000>;
> > +	regulator-max-microvolt = <3300000>;
> > 
> >   	regulator-name = "vcc-gmac-phy";
> >   
> >   };
> >   
> >   &reg_dcdc1 {
> >   
> >   	regulator-always-on;
> > 
> > -	regulator-min-microvolt = <3000000>;
> > -	regulator-max-microvolt = <3000000>;
> > -	regulator-name = "vcc-3v0";
> > +	regulator-min-microvolt = <3300000>;
> > +	regulator-max-microvolt = <3300000>;
> > +	regulator-name = "vcc-3v3";
> > 
> >   };
> >   
> >   &reg_dcdc2 {
> 
> Should this be done also for the bananapi-m2-berry?, it is basically the
> same device
> sun8i-v40-bananapi-m2-berry.dts

I think so but I would rather not do that without testing and I don't have 
that board.

Best regards,
Jernej




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-08-24 21:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-24 19:36 [PATCH] ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator Jernej Skrabec
2020-08-24 20:54 ` [linux-sunxi] " Pablo Sebastián Greco
2020-08-24 21:02   ` Jernej Škrabec [this message]
2020-08-25  8:38 ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2982591.9ztLHtxLPI@jernej-laptop \
    --to=jernej.skrabec@siol.net \
    --cc=devicetree@vger.kernel.org \
    --cc=icenowy@aosc.io \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mripard@kernel.org \
    --cc=pgreco@centosproject.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox