From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Richard Cochran <richardcochran@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Jose Abreu <Jose.Abreu@synopsys.com>,
James Hilliard <james.hilliard1@gmail.com>
Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH net v4 2/3] net: stmmac: pass the desired EST enable state to est_configure()
Date: Thu, 29 Oct 2026 09:09:11 +0100 [thread overview]
Message-ID: <29d6ab3e-be31-4d11-8060-85c1ced14387@bootlin.com> (raw)
In-Reply-To: <20261026-stmmac-est-fixes-v4-2-999dac4de44f@oss.qualcomm.com>
Hi,
On 10/26/26 17:55, Lorenzo Bianconi wrote:
> Pass the desired EST enable state explicitly to est_configure() instead
> of having it derive from cfg->enable. This decouples the hardware
> programming state from the priv->est->enable flag, which records whether
> the taprio offload is attached.
>
> No functional change intended: the callers keep toggling
> priv->est->enable around the EST programming, as before.
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Maxime
> ---
> drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +-
> drivers/net/ethernet/stmicro/stmmac/stmmac_est.c | 6 +++---
> drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
> drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 4 ++--
> 4 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> index 50b590d67d87..b28509555d81 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> @@ -620,7 +620,7 @@ struct stmmac_mmc_ops {
>
> struct stmmac_est_ops {
> int (*configure)(struct stmmac_priv *priv, struct stmmac_est *cfg,
> - unsigned int ptp_rate);
> + unsigned int ptp_rate, bool enable);
> void (*irq_status)(struct stmmac_priv *priv, struct net_device *dev,
> struct stmmac_extra_stats *x, u32 txqcnt);
> };
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
> index afc516059b89..f15d4d046aa7 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
> @@ -26,7 +26,7 @@ static int est_write(void __iomem *est_addr, u32 reg, u32 val, bool gcl)
> }
>
> static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
> - unsigned int ptp_rate)
> + unsigned int ptp_rate, bool enable)
> {
> void __iomem *est_addr = priv->estaddr;
> int i, ret = 0;
> @@ -62,7 +62,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
> ctrl |= ((NSEC_PER_SEC / ptp_rate) * EST_GMAC5_PTOV_MUL) <<
> EST_GMAC5_PTOV_SHIFT;
> }
> - if (cfg->enable)
> + if (enable)
> ctrl |= EST_EEST | EST_SSWL | EST_DFBS;
> else
> ctrl &= ~EST_EEST;
> @@ -70,7 +70,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
> writel(ctrl, est_addr + EST_CONTROL);
>
> /* Configure EST interrupt */
> - if (cfg->enable)
> + if (enable)
> ctrl = EST_IECGCE | EST_IEHS | EST_IEHF | EST_IEBE | EST_IECC;
> else
> ctrl = 0;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> index e54a3c887826..9a32af00d7d2 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> @@ -74,7 +74,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
> mutex_lock(&priv->est_lock);
> priv->est->enable = false;
> stmmac_est_configure(priv, priv, priv->est,
> - priv->plat->clk_ptp_rate);
> + priv->plat->clk_ptp_rate, false);
> mutex_unlock(&priv->est_lock);
> }
>
> @@ -105,7 +105,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
> priv->est->btr[1] = (u32)time.tv_sec;
> priv->est->enable = true;
> ret = stmmac_est_configure(priv, priv, priv->est,
> - priv->plat->clk_ptp_rate);
> + priv->plat->clk_ptp_rate, true);
> mutex_unlock(&priv->est_lock);
> if (ret)
> netdev_err(priv->dev, "failed to configure EST\n");
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> index aea235a69105..ac926c60f9f9 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> @@ -1090,7 +1090,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
> tc_taprio_map_maxsdu_txq(priv, qopt);
>
> ret = stmmac_est_configure(priv, priv, priv->est,
> - priv->plat->clk_ptp_rate);
> + priv->plat->clk_ptp_rate, true);
> mutex_unlock(&priv->est_lock);
> if (ret) {
> netdev_err(priv->dev, "failed to configure EST\n");
> @@ -1109,7 +1109,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
> mutex_lock(&priv->est_lock);
> priv->est->enable = false;
> stmmac_est_configure(priv, priv, priv->est,
> - priv->plat->clk_ptp_rate);
> + priv->plat->clk_ptp_rate, false);
> /* Reset taprio status */
> for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
> priv->xstats.max_sdu_txq_drop[i] = 0;
>
next prev parent reply other threads:[~2026-10-29 8:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 16:55 [PATCH net v4 0/3] net: stmmac: re-apply taprio offload in __stmmac_open() and stmmac_resume() Lorenzo Bianconi
2026-10-26 16:55 ` [PATCH net v4 1/3] net: stmmac: initialize est_lock at probe time Lorenzo Bianconi
2026-10-29 8:08 ` Maxime Chevallier
2026-10-26 16:55 ` [PATCH net v4 2/3] net: stmmac: pass the desired EST enable state to est_configure() Lorenzo Bianconi
2026-10-29 8:09 ` Maxime Chevallier [this message]
2026-10-26 16:55 ` [PATCH net v4 3/3] net: stmmac: re-apply taprio offload in __stmmac_open() and stmmac_resume() Lorenzo Bianconi
2026-10-29 7:57 ` netdev-bot+sashiko
2026-10-29 9:55 ` Lorenzo Bianconi
2026-10-26 17:00 ` [PATCH net v4 0/3] " netdev-bot+sinfo
2026-10-27 8:50 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29d6ab3e-be31-4d11-8060-85c1ced14387@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=Jose.Abreu@synopsys.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=james.hilliard1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo.bianconi@oss.qualcomm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox