linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Can Guo <cang@codeaurora.org>
To: Stanley Chu <stanley.chu@mediatek.com>
Cc: linux-scsi@vger.kernel.org, martin.petersen@oracle.com,
	andy.teng@mediatek.com, jejb@linux.ibm.com,
	chun-hung.wu@mediatek.com, kuohong.wang@mediatek.com,
	linux-kernel@vger.kernel.org, avri.altman@wdc.com,
	linux-mediatek@lists.infradead.org, peter.wang@mediatek.com,
	alim.akhtar@samsung.com, matthias.bgg@gmail.com,
	asutoshd@codeaurora.org, bvanassche@acm.org,
	linux-arm-kernel@lists.infradead.org, beanhuo@micron.com
Subject: Re: [PATCH v3 1/2] scsi: ufs: pass device information to apply_dev_quirks
Date: Mon, 17 Feb 2020 20:20:05 +0800	[thread overview]
Message-ID: <2a8fc44914b7ed8777a4a99ba6b8647a@codeaurora.org> (raw)
In-Reply-To: <1578726707-6596-2-git-send-email-stanley.chu@mediatek.com>

On 2020-01-11 15:11, Stanley Chu wrote:
> Pass UFS device information to vendor-specific variant callback
> "apply_dev_quirks" because some platform vendors need to know such
> information to apply special handlings or quirks in specific devices.
> 
> In the same time, modify existed vendor implementations according to
> the new interface for those vendor drivers which will be built-in
> or built as a module alone with UFS core driver.
> 
> Cc: Alim Akhtar <alim.akhtar@samsung.com>
> Cc: Asutosh Das <asutoshd@codeaurora.org>
> Cc: Avri Altman <avri.altman@wdc.com>
> Cc: Bart Van Assche <bvanassche@acm.org>
> Cc: Bean Huo <beanhuo@micron.com>
> Cc: Can Guo <cang@codeaurora.org>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Reviewed-by: Avri Altman <avri.altman@wdc.com>
> Reviewed-by: Bean Huo <beanhuo@micron.com>
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
>  drivers/scsi/ufs/ufs-qcom.c | 3 ++-
>  drivers/scsi/ufs/ufshcd.c   | 8 ++++----
>  drivers/scsi/ufs/ufshcd.h   | 7 ++++---
>  3 files changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index c69c29a1ceb9..ebb5c66e069f 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -949,7 +949,8 @@ static int
> ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
>  	return err;
>  }
> 
> -static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
> +static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba,
> +				     struct ufs_dev_desc *card)
>  {
>  	int err = 0;
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 1b97f2dc0b63..7c85c890594c 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6803,7 +6803,8 @@ static int
> ufshcd_quirk_tune_host_pa_tactivate(struct ufs_hba *hba)
>  	return ret;
>  }
> 
> -static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
> +static void ufshcd_tune_unipro_params(struct ufs_hba *hba,
> +				      struct ufs_dev_desc *card)
>  {
>  	if (ufshcd_is_unipro_pa_params_tuning_req(hba)) {
>  		ufshcd_tune_pa_tactivate(hba);
> @@ -6817,7 +6818,7 @@ static void ufshcd_tune_unipro_params(struct 
> ufs_hba *hba)
>  	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
>  		ufshcd_quirk_tune_host_pa_tactivate(hba);
> 
> -	ufshcd_vops_apply_dev_quirks(hba);
> +	ufshcd_vops_apply_dev_quirks(hba, card);

Hi Stanley,

Is this series merged? If no, would you mind moving
ufshcd_vops_apply_dev_quirks(hba, card); a little bit? Like below.

@@ -6852,14 +6852,14 @@ static void ufshcd_tune_unipro_params(struct 
ufs_hba *hba)
                 ufshcd_tune_pa_hibern8time(hba);
         }

+       ufshcd_vops_apply_dev_quirks(hba, card);
+
         if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE)
                 /* set 1ms timeout for PA_TACTIVATE */
                 ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10);

In this way, vendor codes have a chance to modify the dev_quirks
before ufshcd_tune_unipro_params() does the rest of its job.

Thanks,
Can Guo.

>  }
> 
>  static void ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba)
> @@ -6980,10 +6981,9 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
>  	}
> 
>  	ufs_fixup_device_setup(hba, &card);
> +	ufshcd_tune_unipro_params(hba, &card);
>  	ufs_put_device_desc(&card);
> 
> -	ufshcd_tune_unipro_params(hba);
> -
>  	/* UFS device is also active now */
>  	ufshcd_set_ufs_dev_active(hba);
>  	ufshcd_force_reset_auto_bkops(hba);
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index e05cafddc87b..4f3fa71303da 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -320,7 +320,7 @@ struct ufs_hba_variant_ops {
>  	void	(*setup_task_mgmt)(struct ufs_hba *, int, u8);
>  	void    (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
>  					enum ufs_notify_change_status);
> -	int	(*apply_dev_quirks)(struct ufs_hba *);
> +	int	(*apply_dev_quirks)(struct ufs_hba *, struct ufs_dev_desc *);
>  	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
>  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
>  	void	(*dbg_register_dump)(struct ufs_hba *hba);
> @@ -1052,10 +1052,11 @@ static inline void
> ufshcd_vops_hibern8_notify(struct ufs_hba *hba,
>  		return hba->vops->hibern8_notify(hba, cmd, status);
>  }
> 
> -static inline int ufshcd_vops_apply_dev_quirks(struct ufs_hba *hba)
> +static inline int ufshcd_vops_apply_dev_quirks(struct ufs_hba *hba,
> +					       struct ufs_dev_desc *card)
>  {
>  	if (hba->vops && hba->vops->apply_dev_quirks)
> -		return hba->vops->apply_dev_quirks(hba);
> +		return hba->vops->apply_dev_quirks(hba, card);
>  	return 0;
>  }

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-02-17 12:20 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-11  7:11 [PATCH v3 0/2] scsi: ufs: pass device information to apply_dev_quirks Stanley Chu
2020-01-11  7:11 ` [PATCH v3 1/2] " Stanley Chu
2020-02-17 12:20   ` Can Guo [this message]
2020-02-18  7:02     ` Stanley Chu
2020-02-20  1:36       ` Can Guo
2020-01-11  7:11 ` [PATCH v3 2/2] scsi: ufs-mediatek: add apply_dev_quirks variant operation Stanley Chu
2020-01-16  3:24 ` [PATCH v3 0/2] scsi: ufs: pass device information to apply_dev_quirks Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2a8fc44914b7ed8777a4a99ba6b8647a@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=alim.akhtar@samsung.com \
    --cc=andy.teng@mediatek.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=chun-hung.wu@mediatek.com \
    --cc=jejb@linux.ibm.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=matthias.bgg@gmail.com \
    --cc=peter.wang@mediatek.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).