From: dmitry.torokhov@gmail.com (Dmitry Torokhov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: dts: set up trigger type for edt-ft5x06 interrupts
Date: Sat, 12 Sep 2015 10:45:51 -0700 [thread overview]
Message-ID: <2adcbfd1d5b237598d37edcbeec4a8dbd443f36f.1442079408.git.dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <5044530af510d6686e78f8dfa912d89ef824f899.1442079408.git.dmitry.torokhov@gmail.com>
Now that the driver respects IRQ trigger settings from device tree, let's
fix them up in individual DTSes (note that the driver is still compatible
with older DTSes).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/imx28-tx28.dts | 3 ++-
arch/arm/boot/dts/imx53-tx53-x03x.dts | 3 ++-
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 ++-
4 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d..d83fdcd 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -471,7 +471,7 @@
reg = <0x38>;
interrupt-parent = <&gpio0>;
- interrupts = <31 0>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index a5b27c8..4ea8934 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "imx28.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Ka-Ro electronics TX28 module";
@@ -324,7 +325,7 @@
pinctrl-names = "default";
pinctrl-0 = <&tx28_edt_ft5x06_pins>;
interrupt-parent = <&gpio2>;
- interrupts = <5 0>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 3b73e81..13e842b 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "imx53-tx53.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -216,7 +217,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
interrupt-parent = <&gpio6>;
- interrupts = <15 0>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index da08de3..13cb7cc 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -272,7 +273,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06>;
interrupt-parent = <&gpio6>;
- interrupts = <15 0>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,wakeup;
--
2.6.0.rc0.131.gf624c3d
next parent reply other threads:[~2015-09-12 17:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5044530af510d6686e78f8dfa912d89ef824f899.1442079408.git.dmitry.torokhov@gmail.com>
2015-09-12 17:45 ` Dmitry Torokhov [this message]
2015-09-14 21:24 ` [PATCH 6/6] ARM: dts: set up trigger type for edt-ft5x06 interrupts Felipe Balbi
2015-09-15 15:40 ` Tony Lindgren
2015-09-23 12:16 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2adcbfd1d5b237598d37edcbeec4a8dbd443f36f.1442079408.git.dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).