From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>,
linux-arm-msm@vger.kernel.org, coresight@lists.linaro.org,
linux-kernel@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>,
Tingwei Zhang <tingwei@codeaurora.org>,
Leo Yan <leo.yan@linaro.org>,
linux-arm-kernel@lists.infradead.org,
Mike Leach <mike.leach@linaro.org>
Subject: Re: [PATCH] coresight: etm4x: Add support to disable trace unit power up
Date: Fri, 15 May 2020 00:09:23 +0530 [thread overview]
Message-ID: <2c932d57288508cc72a6ee323cf5595e@codeaurora.org> (raw)
In-Reply-To: <20200514180055.GA29384@xps15>
Hi Mathieu,
On 2020-05-14 23:30, Mathieu Poirier wrote:
> Good morning Sai,
>
> On Thu, May 14, 2020 at 04:29:15PM +0530, Sai Prakash Ranjan wrote:
>> From: Tingwei Zhang <tingwei@codeaurora.org>
>>
>> On some Qualcomm Technologies Inc. SoCs like SC7180, there
>> exists a hardware errata where the APSS (Application Processor
>> SubSystem)/CPU watchdog counter is stopped when ETM register
>> TRCPDCR.PU=1.
>
> Fun stuff...
>
Yes :)
>> Since the ETMs share the same power domain as
>> that of respective CPU cores, they are powered on when the
>> CPU core is powered on. So we can disable powering up of the
>> trace unit after checking for this errata via new property
>> called "qcom,tupwr-disable".
>>
>> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
>> Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>
> Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
>
Tingwei is the author, so if I understand correctly, his signed-off-by
should appear first, am I wrong?
>> ---
>> .../devicetree/bindings/arm/coresight.txt | 6 ++++
>> drivers/hwtracing/coresight/coresight-etm4x.c | 29
>> ++++++++++++-------
>
> Please split in two patches.
>
Sure, I will split the dt-binding into separate patch, checkpatch did
warn.
>> 2 files changed, 25 insertions(+), 10 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/coresight.txt
>> b/Documentation/devicetree/bindings/arm/coresight.txt
>> index 846f6daae71b..d2030128fe46 100644
>> --- a/Documentation/devicetree/bindings/arm/coresight.txt
>> +++ b/Documentation/devicetree/bindings/arm/coresight.txt
>> @@ -108,6 +108,12 @@ its hardware characteristcs.
>> * arm,cp14: must be present if the system accesses ETM/PTM
>> management
>> registers via co-processor 14.
>>
>> + * qcom,tupwr-disable: boolean. Indicates that trace unit power up
>> can
>> + be disabled on Qualcomm Technologies Inc. systems where ETMs are
>> in
>> + the same power domain as their CPU cores. This property is
>> required
>> + to identify such systems with hardware errata where the CPU
>> watchdog
>> + counter is stopped when TRCPDCR.PU=1.
>> +
>
> I think something like "qcom,skip-power-up" would be clearer.
>
> Also, a better choice of words is that TRCPDCR.PU does not have to be
> set on
> Qualcomm...
>
Yes "qcom,skip-power-up" is a lot better, thanks. Also will use
something as
you suggested for description.
>> * Optional property for TMC:
>>
>> * arm,buffer-size: size of contiguous buffer space for TMC ETR
>> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c
>> b/drivers/hwtracing/coresight/coresight-etm4x.c
>> index fb0f5f4f3a91..6886b44f6947 100644
>> --- a/drivers/hwtracing/coresight/coresight-etm4x.c
>> +++ b/drivers/hwtracing/coresight/coresight-etm4x.c
>> @@ -104,6 +104,11 @@ struct etm4_enable_arg {
>> int rc;
>> };
>>
>> +static inline bool etm4_can_disable_tupwr(struct device *dev)
>> +{
>> + return fwnode_property_present(dev_fwnode(dev),
>> "qcom,tupwr-disable");
>> +}
>> +
>
> Please call fwnode_property_present() at initialisation time to set a
> new
> drvdata::skip_power_up variable. From there just switch on that in
> etm4_enable/disable_hw().
>
Will do, thanks.
Thanks,
Sai
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-14 18:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 10:59 [PATCH] coresight: etm4x: Add support to disable trace unit power up Sai Prakash Ranjan
2020-05-14 18:00 ` Mathieu Poirier
2020-05-14 18:39 ` Sai Prakash Ranjan [this message]
2020-05-15 14:52 ` Mathieu Poirier
2020-05-15 15:07 ` Sai Prakash Ranjan
2020-05-15 15:51 ` Mathieu Poirier
2020-05-15 15:58 ` Sai Prakash Ranjan
2020-05-15 16:25 ` Sai Prakash Ranjan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c932d57288508cc72a6ee323cf5595e@codeaurora.org \
--to=saiprakash.ranjan@codeaurora.org \
--cc=coresight@lists.linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
--cc=swboyd@chromium.org \
--cc=tingwei@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).