From mboxrd@z Thu Jan  1 00:00:00 1970
From: michal.simek@xilinx.com (Michal Simek)
Date: Tue, 6 Nov 2018 12:54:07 +0100
Subject: [PATCH v10 5/6] arm64: zynqmp: Add DDRC node
In-Reply-To: <1540447621-22870-6-git-send-email-manish.narani@xilinx.com>
References: <1540447621-22870-1-git-send-email-manish.narani@xilinx.com>
 <1540447621-22870-6-git-send-email-manish.narani@xilinx.com>
Message-ID: <2da1ff15-1064-3fac-750e-3b0f006ee1af@xilinx.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 25. 10. 18 8:07, Manish Narani wrote:
> Add ddrc memory controller node in dts. The size mentioned in dts is
> 0x30000, because we need to access DDR_QOS INTR registers located at
> 0xFD090208 from this driver.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 29ce234..a81d3b16 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -355,6 +355,13 @@
>  			xlnx,bus-width = <64>;
>  		};
>  
> +		mc: memory-controller at fd070000 {
> +			compatible = "xlnx,zynqmp-ddrc-2.40a";
> +			reg = <0x0 0xfd070000 0x0 0x30000>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 112 4>;
> +		};
> +
>  		gem0: ethernet at ff0b0000 {
>  			compatible = "cdns,zynqmp-gem", "cdns,gem";
>  			status = "disabled";
> 

Applied with changed subject "arm64: dts: zynqmp: Add DDRC node"
to zynqmp/dt branch.

Thanks,
Michal