From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Marek Vasut <marex@denx.de>, <linux-arm-kernel@lists.infradead.org>
Cc: <jneuhauser@dh-electronics.com>,
Christophe Roullier <christophe.roullier@foss.st.com>,
Gabriel Fernandez <gabriel.fernandez@foss.st.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Stephen Boyd <sboyd@kernel.org>, <linux-clk@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH 4/5] ARM: dts: stm32: Add alternate pinmux for mco2 pins
Date: Mon, 7 Feb 2022 12:48:11 +0100 [thread overview]
Message-ID: <2e41f485-f07a-c9d5-9b0d-cc31d9039962@foss.st.com> (raw)
In-Reply-To: <20220118202958.1840431-4-marex@denx.de>
On 1/18/22 21:29, Marek Vasut wrote:
> Add pinmux option for MCO2 pin. This is used on DHCOM when the
> ethernet PHY 50 MHz clock is generated by the MCO2 on PG2 pin.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Christophe Roullier <christophe.roullier@foss.st.com>
> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: linux-clk@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: linux-arm-kernel@lists.infradead.org
> ---
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 2cd2ac9beaf20..6da84e3f05ea3 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -882,6 +882,21 @@ pins {
> };
> };
>
> + mco2_pins_a: mco2-0 {
> + pins {
> + pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <2>;
> + };
> + };
> +
> + mco2_sleep_pins_a: mco2-sleep-0 {
> + pins {
> + pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
> + };
> + };
> +
> m_can1_pins_a: m-can1-0 {
> pins1 {
> pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
Applied on stm32-next
thanks
Alex
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-07 11:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-18 20:29 [PATCH 1/5] clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock Marek Vasut
2022-01-18 20:29 ` [PATCH 2/5] clk: stm32mp1: Add parent_data to ETHRX clock Marek Vasut
2022-01-20 12:07 ` Johann Neuhauser
2022-01-21 9:05 ` gabriel.fernandez
2022-01-25 1:16 ` Stephen Boyd
2022-01-18 20:29 ` [PATCH 3/5] ARM: dts: stm32: Add alternate pinmux for ethernet0 pins Marek Vasut
2022-01-20 12:07 ` Johann Neuhauser
2022-02-07 11:47 ` Alexandre TORGUE
2022-01-18 20:29 ` [PATCH 4/5] ARM: dts: stm32: Add alternate pinmux for mco2 pins Marek Vasut
2022-01-20 12:07 ` Johann Neuhauser
2022-02-07 11:48 ` Alexandre TORGUE [this message]
2022-01-18 20:29 ` [PATCH 5/5] ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM Marek Vasut
2022-01-20 12:08 ` Johann Neuhauser
2022-02-07 11:49 ` Alexandre TORGUE
2022-01-20 12:07 ` [PATCH 1/5] clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock Johann Neuhauser
2022-01-20 22:03 ` Stephen Boyd
2022-01-20 22:39 ` Marek Vasut
2022-01-21 13:12 ` Marek Vasut
2022-01-21 9:03 ` gabriel.fernandez
2022-01-25 1:16 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2e41f485-f07a-c9d5-9b0d-cc31d9039962@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=christophe.roullier@foss.st.com \
--cc=gabriel.fernandez@foss.st.com \
--cc=jneuhauser@dh-electronics.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).