Re: [RESEND PATCH] soc: mediatek: cmdq: Use mailbox rx_callback instead of cmdq_task_cb

[Jason-JH Lin <jason-jh.lin@mediatek.com>]

Hi Chun-Kuang,

Reviewed-by: jason-jh.lin <jason-jh.lin@mediatek.com>
and
Tested-by: jason-jh.lin <jason-jh.lin@mediatek.com>


Hi Roy, Moudy,

Please aware of this modification for MDP on-going patch.

You can refer to this patch on DRM:

https://patchwork.kernel.org/project/linux-mediatek/patch/20211028101912.4624-2-jason-jh.lin@mediatek.com/


Thanks.

Regard,
Jason-JH.Lin

On Sat, 2022-04-16 at 17:54 +0800, Chun-Kuang Hu wrote:
> rx_callback is a standard mailbox callback mechanism and could cover
> the
> function of proprietary cmdq_task_cb, so use the standard one instead
> of
> the proprietary one. Client has changed to use the standard callback
> machanism and sync dma buffer in client driver, so remove the
> proprietary
> callback in cmdq helper.
> 
> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c | 25 +-----------------------
> -
>  include/linux/soc/mediatek/mtk-cmdq.h  |  5 +----
>  2 files changed, 2 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 3c8e421..c1837a4 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -425,34 +425,11 @@ int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
>  }
>  EXPORT_SYMBOL(cmdq_pkt_finalize);
>  
> -static void cmdq_pkt_flush_async_cb(struct cmdq_cb_data data)
> -{
> -	struct cmdq_pkt *pkt = (struct cmdq_pkt *)data.data;
> -	struct cmdq_task_cb *cb = &pkt->cb;
> -	struct cmdq_client *client = (struct cmdq_client *)pkt->cl;
> -
> -	dma_sync_single_for_cpu(client->chan->mbox->dev, pkt->pa_base,
> -				pkt->cmd_buf_size, DMA_TO_DEVICE);
> -	if (cb->cb) {
> -		data.data = cb->data;
> -		cb->cb(data);
> -	}
> -}
> -
> -int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb
> cb,
> -			 void *data)
> +int cmdq_pkt_flush_async(struct cmdq_pkt *pkt)
>  {
>  	int err;
>  	struct cmdq_client *client = (struct cmdq_client *)pkt->cl;
>  
> -	pkt->cb.cb = cb;
> -	pkt->cb.data = data;
> -	pkt->async_cb.cb = cmdq_pkt_flush_async_cb;
> -	pkt->async_cb.data = pkt;
> -
> -	dma_sync_single_for_device(client->chan->mbox->dev, pkt-
> >pa_base,
> -				   pkt->cmd_buf_size, DMA_TO_DEVICE);
> -
>  	err = mbox_send_message(client->chan, pkt);
>  	if (err < 0)
>  		return err;
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
> b/include/linux/soc/mediatek/mtk-cmdq.h
> index ac6b5f3..2b498f4 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -268,8 +268,6 @@ int cmdq_pkt_finalize(struct cmdq_pkt *pkt);
>   * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute
> the CMDQ
>   *                          packet and call back at the end of done
> packet
>   * @pkt:	the CMDQ packet
> - * @cb:		called at the end of done packet
> - * @data:	this data will pass back to cb
>   *
>   * Return: 0 for success; else the error code is returned
>   *
> @@ -277,7 +275,6 @@ int cmdq_pkt_finalize(struct cmdq_pkt *pkt);
>   * at the end of done packet. Note that this is an ASYNC function.
> When the
>   * function returned, it may or may not be finished.
>   */
> -int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb
> cb,
> -			 void *data);
> +int cmdq_pkt_flush_async(struct cmdq_pkt *pkt);
>  
>  #endif	/* __MTK_CMDQ_H__ */
-- 
Jason-JH Lin <jason-jh.lin@mediatek.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel