From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Thu, 03 Dec 2015 16:43:02 +0100 Subject: [PATCH 1/3] ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron In-Reply-To: <2767415.mEkgRbSSUB@diego> References: <2767415.mEkgRbSSUB@diego> Message-ID: <3006808.mS23SN11BJ@diego> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Dienstag, 1. Dezember 2015, 18:14:27 schrieb Heiko St?bner: applied all three patches to my dts32 branch for 4.5, after disabling emmc tuning on mickey (in a similar fashion as on minnie) for the short term. > The edp-24m clock has two possible sources: the 24MHz oscillator as well > as an external 27MHz input. The power-on-default is the 27MHz clock which > is not supplied on all Rockchip boards. While on all current boards and > also all Veyron Chromebooks the bootloader seems to adapt the muxing to > the internal source, this doesn't seem to be the case on headless veyron > devices like brain and mickey making the edp-24m clock an orphan. > On the hardware side the 27m input also is not connected at all. > > With the upcoming deferral of orphan-clocks this results in the power- > domain code deferring, as it cannot request the needed clock and if the > synchronous reset is sucessfullat all in this case is also unknown. > > So fix that by making sure, the edp-24m clock is muxed to the internal > 24MHz oscillator at all times. > > Signed-off-by: Heiko Stuebner > --- > It seems I had some issues sending, sorry about the double-mails. > > arch/arm/boot/dts/rk3288-veyron.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi > b/arch/arm/boot/dts/rk3288-veyron.dtsi index 5e61f07..9fce91f 100644 > --- a/arch/arm/boot/dts/rk3288-veyron.dtsi > +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi > @@ -340,6 +340,11 @@ > i2c-scl-rising-time-ns = <1000>; > }; > > +&power { > + assigned-clocks = <&cru SCLK_EDP_24M>; > + assigned-clock-parents = <&xin24m>; > +}; > + > &pwm1 { > status = "okay"; > };