From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ARM: dts: BCM5301X: Add support for Linksys EA9500
Date: Tue, 26 Jun 2018 13:30:11 -0700 [thread overview]
Message-ID: <32c1b4db-acb8-35ae-eab9-f4e85a204e09@gmail.com> (raw)
In-Reply-To: <20180618174159.86150-1-npcomplete13@gmail.com>
On 06/18/2018 10:41 AM, Vivek Unune wrote:
> Hardware Info
> -------------
>
> Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
> Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125
> DDR3 RAM - 256 MB
> Flash - 128 MB (Toshiba TC58BVG0S3HTA00)
> 2.4GHz - BCM4366 4?4 2.4/5G single chip 802.11ac SoC
> Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4)
> 5GHz x 2 - BCM4366 4?4 2.4/5G single chip 802.11ac SoC
> Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch
> Ports - 8 Ports, 1 WAN Ports
> Antennas - 8 Antennas
> Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1
>
> Tested with OpenWrt built with DSA driver and Kernel v4.14
>
> Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Applied to devicetree/next, thanks Vivek.
--
Florian
prev parent reply other threads:[~2018-06-26 20:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-22 22:38 [v2] ARM: dts: BCM5301X: Add support for Linksys EA9500 Vivek Unune
2018-06-18 17:41 ` [PATCH v3] " Vivek Unune
2018-06-26 20:30 ` Florian Fainelli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32c1b4db-acb8-35ae-eab9-f4e85a204e09@gmail.com \
--to=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).