From: "Heiko Stübner" <heiko@sntech.de>
To: Chukun Pan <amadeus@jmu.edu.cn>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Rob Herring <robh@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Chukun Pan <amadeus@jmu.edu.cn>
Subject: Re: [PATCH 1/5] arm64: dts: rockchip: fix regulator and supply for Lunzn Fastrhino R6xS
Date: Fri, 28 Jun 2024 16:12:10 +0200 [thread overview]
Message-ID: <3302842.44csPzL39Z@diego> (raw)
In-Reply-To: <20240628140104.551760-1-amadeus@jmu.edu.cn>
Hi,
Am Freitag, 28. Juni 2024, 16:01:00 CEST schrieb Chukun Pan:
> Make the regulator name and supply the same as those marked by schematics.
>
> Fixes: c79dab407afd ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
> Fixes: b9f8ca655d80 ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
this needs to be split more please. Separate commits with more verbose
commit messages for:
- regulator renames
- the pmu-io-domain changes - why is moving vccio3-supply moving to
the boards
- fixing usb regulators - vcc5v0_usb_host probably because that regulator
does not exist at all?
> ---
> .../dts/rockchip/rk3568-fastrhino-r66s.dts | 4 +++
> .../dts/rockchip/rk3568-fastrhino-r66s.dtsi | 28 +++++++------------
> .../dts/rockchip/rk3568-fastrhino-r68s.dts | 4 +++
> 3 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> index 58ab7e9971db..b5e67990dd0f 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> @@ -11,6 +11,10 @@ aliases {
> };
> };
>
> +&pmu_io_domains {
> + vccio3-supply = <&vccio_sd>;
> +};
> +
> &sdmmc0 {
> bus-width = <4>;
> cap-mmc-highspeed;
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> index 89e84e3a9262..82577eba31eb 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> @@ -39,9 +39,9 @@ status_led: led-status {
> };
> };
>
> - dc_12v: dc-12v-regulator {
> + vcc12v_dcin: vcc12v-dcin-regulator {
> compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> + regulator-name = "vcc12v_dcin";
> regulator-always-on;
> regulator-boot-on;
> regulator-min-microvolt = <12000000>;
> @@ -65,7 +65,7 @@ vcc3v3_sys: vcc3v3-sys-regulator {
> regulator-boot-on;
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> + vin-supply = <&vcc12v_dcin>;
> };
>
> vcc5v0_sys: vcc5v0-sys-regulator {
> @@ -75,16 +75,7 @@ vcc5v0_sys: vcc5v0-sys-regulator {
> regulator-boot-on;
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb_host";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> };
>
> vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> @@ -94,8 +85,9 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> pinctrl-names = "default";
> pinctrl-0 = <&vcc5v0_usb_otg_en>;
> regulator-name = "vcc5v0_usb_otg";
> - regulator-always-on;
> - regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc5v0_sys>;
> };
> };
>
> @@ -405,8 +397,8 @@ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
> &pmu_io_domains {
> pmuio1-supply = <&vcc3v3_pmu>;
> pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio3-supply = <&vccio_sd>;
> + vccio1-supply = <&vcc_3v3>;
> + vccio2-supply = <&vcc_1v8>;
> vccio4-supply = <&vcc_1v8>;
> vccio5-supply = <&vcc_3v3>;
> vccio6-supply = <&vcc_1v8>;
> @@ -460,7 +452,7 @@ &usb2phy0 {
> };
>
> &usb2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> + phy-supply = <&vcc5v0_sys>;
> status = "okay";
> };
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
> index e1fe5e442689..a3339186e89c 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
> @@ -102,6 +102,10 @@ eth_phy1_reset_pin: eth-phy1-reset-pin {
> };
> };
>
> +&pmu_io_domains {
> + vccio3-supply = <&vcc_3v3>;
> +};
> +
> &sdhci {
> bus-width = <8>;
> max-frequency = <200000000>;
>
prev parent reply other threads:[~2024-06-28 14:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-28 14:01 [PATCH 1/5] arm64: dts: rockchip: fix regulator and supply for Lunzn Fastrhino R6xS Chukun Pan
2024-06-28 14:01 ` [PATCH 2/5] arm64: dts: rockchip: remove unused usb2 nodes " Chukun Pan
2024-06-28 14:01 ` [PATCH 3/5] arm64: dts: rockchip: disable display subsystem " Chukun Pan
2024-06-28 14:01 ` [PATCH 4/5] arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S Chukun Pan
2024-06-28 14:13 ` Heiko Stübner
2024-06-28 14:01 ` [PATCH 5/5] arm64: dts: rockchip: Enable UHS-I SDR-50 for Lunzn FastRhino R66S Chukun Pan
2024-06-28 14:12 ` Heiko Stübner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3302842.44csPzL39Z@diego \
--to=heiko@sntech.de \
--cc=amadeus@jmu.edu.cn \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).