linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] clk: rockchip: protect critical clocks from getting disabled
Date: Sat, 09 Aug 2014 00:20:46 +0200	[thread overview]
Message-ID: <3332039.dxD4mlCSgf@diego> (raw)
In-Reply-To: <CAD=FV=XA31T9i6nLaDhVS+BkJ=U-PiMye_ouC1QY8EMoKqMCiQ@mail.gmail.com>

Am Freitag, 8. August 2014, 14:58:11 schrieb Doug Anderson:
> Heiko,
> 
> On Fri, Aug 1, 2014 at 1:15 AM, Heiko St?bner <heiko@sntech.de> wrote:
> > Am Donnerstag, 31. Juli 2014, 17:30:25 schrieb Mike Turquette:
> >> Quoting Heiko St?bner (2014-07-31 16:29:34)
> >> 
> >> > Hi Mike,
> >> > 
> >> > Am Donnerstag, 31. Juli 2014, 15:45:23 schrieb Mike Turquette:
> >> > > Quoting Heiko Stuebner (2014-07-29 12:12:05)
> >> > > 
> >> > > > The clock-tree contains clocks that should never get disabled
> >> > > > automatically. One example are the base ACLKs, the base supplies
> >> > > > for
> >> > > > all
> >> > > > peripherals.
> >> > > > 
> >> > > > Therefore add a structure similar to the sunxi clock-tree to
> >> > > > protect
> >> > > > these
> >> > > > special clocks from being disabled.
> >> > > > 
> >> > > > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> >> > > > ---
> >> > > > 
> >> > > >  drivers/clk/rockchip/clk-rk3188.c |  7 +++++++
> >> > > >  drivers/clk/rockchip/clk-rk3288.c |  7 +++++++
> >> > > >  drivers/clk/rockchip/clk.c        | 13 +++++++++++++
> >> > > >  drivers/clk/rockchip/clk.h        |  1 +
> >> > > >  4 files changed, 28 insertions(+)
> >> > > > 
> >> > > > diff --git a/drivers/clk/rockchip/clk-rk3188.c
> >> > > > b/drivers/clk/rockchip/clk-rk3188.c index a83a6d8..5aef277 100644
> >> > > > --- a/drivers/clk/rockchip/clk-rk3188.c
> >> > > > +++ b/drivers/clk/rockchip/clk-rk3188.c
> >> > > > @@ -599,6 +599,11 @@ static struct rockchip_clk_branch
> >> > > > rk3188_clk_branches[] __initdata = {>
> >> > > > 
> >> > > >         GATE(ACLK_GPS, "aclk_gps", "aclk_peri", 0,
> >> > > >         RK2928_CLKGATE_CON(8),
> >> > > >         13, GFLAGS),>
> >> > > >  
> >> > > >  };
> >> > > > 
> >> > > > +static const char *rk3188_critical_clocks[] __initconst = {
> >> > > > +       "aclk_cpu",
> >> > > > +       "aclk_peri",
> >> > > 
> >> > > I'm not against the idea of critical clocks, but I want to verify
> >> > > that
> >> > > there is no other driver out there that is a better fit for claiming
> >> > > these clks via clk_get and enabling them the normal way via
> >> > > clk_enable?
> >> > 
> >> > In the clock hierarchy of Rockchip SoCs, both aclks listed here, are
> >> > sources for pclk and hclk, as well as sourcing some other peripheral
> >> > gates further below too. So from what I've seen from the clock
> >> > diagrams,
> >> > there is nothing that would claim these clocks directly, and it
> >> > wouldn't
> >> > also make any sense to let them get disabled as there will always be
> >> > something using them (for example the dram-controller).
> >> 
> >> Sounds good. Just out of curiosity, under what circumstances would you
> >> want to gate them? Is there a use case for it?
> > 
> > hmm, I don't see a use-case for gating these at runtime right now, simply
> > because there should be a user for them all the time. (both aclks combined
> > have at least 68 consumers on the rk3288 and a similar number on the
> > previous socs)
> > 
> > The only thing I could think of would be something suspend related - which
> > we don't have yet. But then this would probably happen in the clock
> > controller itself anyway in some late suspend-related action, so it could
> > take into account them being defined as critical clocks.
> 
> I know Rockchip has some funky stuff planned for memory scaling too.
> Perhaps Kever can comment whether these two clocks might need to be
> disabled in that case?

hmm looking at the core clock tree, I wouldn't think so.

The only intersection between the ddr-clk, aclk_cpu and aclk_peri is the gpll 
which can be a source to both. But the ddr-clk is mainly sourced from the dpll 
anyway.

In any case, turning off aclk_cpu/aclk_peri in this scenario wouldn't normally 
be possible anyway, as most of the time some pclk_* would be active anyway.


> In any case, this patch fixes a hang at boot when using the PWM driver
> that just landed, so:
> 
> Tested-by: Doug Anderson <dianders@chromium.org>

thanks


Heiko

  reply	other threads:[~2014-08-08 22:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-29 19:12 [PATCH 0/4] ARM: rockchip: add dma support Heiko Stuebner
2014-07-29 19:12 ` [PATCH 1/4] clk: rockchip: protect critical clocks from getting disabled Heiko Stuebner
2014-07-31 22:45   ` Mike Turquette
2014-07-31 23:29     ` Heiko Stübner
2014-08-01  0:30       ` Mike Turquette
2014-08-01  8:15         ` Heiko Stübner
2014-08-08 21:58           ` Doug Anderson
2014-08-08 22:20             ` Heiko Stübner [this message]
2014-08-11 10:03               ` Kever Yang
2014-08-11 10:22                 ` Heiko Stübner
2014-08-12  0:59   ` Kever Yang
2014-07-29 19:12 ` [PATCH 2/4] ARM: rockchip: enable the AMBA bus Heiko Stuebner
2014-08-11  3:35   ` Kever Yang
2014-08-11  7:50     ` Heiko Stübner
2014-08-11 16:19   ` Doug Anderson
2014-08-12  1:00   ` Kever Yang
2014-07-29 19:12 ` [PATCH 3/4] ARM: dts: rockchip: add rk3288 dma controllers Heiko Stuebner
2014-08-11 17:01   ` Doug Anderson
2014-08-11 18:01     ` Heiko Stübner
2014-08-11 18:37       ` Andreas Färber
2014-08-11 19:15         ` Heiko Stübner
2014-08-12  1:01   ` Kever Yang
2014-07-29 19:12 ` [PATCH 4/4] ARM: dts: rockchip: add rk3188 " Heiko Stuebner
2014-07-29 19:55   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3332039.dxD4mlCSgf@diego \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).